This precision tool kit is for extracting and drawing in bushes, bearings, seals etc. Fully universal applications for cars, LGV and HGV. To be used on their own (manual operation) or with a workshop press of suitable size. Depending on requirements, these particular sleeves can also be individually reworked (e.g. recess, etc.) The kit contains 22 x Press Sleeves and 5 pulling spindles with thrust bearings. Specifications Designed for removal and installation of bushes/bearings/seals Universal application for cars / LGV / HGV Suited to silent bearings / Hydraulic bearings / Bushes Etc Compatible with workshop presses 22 Press Sleeves Inside Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75, 80 Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90 5 x Pulling spindles and nuts M10, M12, M14, M16, M18 Heavy duty moulded storage case

Power Supply: DC 12V
Voltage: 12V
Power: 100W
Flow Rate: 20~30L/min
Output Pressure: 0-20psi
Content:
1*smoke leak detector
1*standard core adaptor
1*adaptor connector
1*valve core wrench
1*smoke hose
1*power cord clamp
1*specialized #22 plug
1*cap plug(H)
1*cap plug(S)
1*test oil 250ml
1*oil bottle 30ml

1. For removal of diesel injectors
2. Various adapters make the kit suitable for most diesel injectors.
.Includes also the following components:
-3 different slide hammers
  1.6 kg, 160 mm length
  2.7 kg, 460 mm length
  5.1 kg, 600 mm length
-2 pulling claws with fork opening
  13.7 x 18 mm, 105 mm length
  12.7 x 19 mm, 130 mm length
-5 slotted 6-pt 1/2"" sockets, 100 mm length
  Sizes 25 - 27 - 28 - 29 - 30 mm

-Injector extractor, sleeve design, with shells
  Outer diameter 35 mm
  Internal diameter 29 mm
  M17 x 1.0 spindle

Pulling adapter with external thread
  M27 x 1.0 (3pcs) and M25 x 1.0
Pulling adapter with internal thread
  M27 x 1.0 (3pcs)
Sliding hammer adapter for Inner, outer and claw extractor.

.Necessary for pre-tensioning self adjusting clutches before removal or installation.
.Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.
.Features a refitting tool, allowing the clutch adjuster to be wound back, and six alignment adapters.
.Spigot Adapters: Ø15/23, Ø15/28, Ø15/34, Ø21/23, Ø20/23, Ø14/15/20mm.
.Assembly Flywheel Threads: Ø6x1.00, Ø7x1.00, Ø8x1.25mm.
.Supplied in carry-case.

The pneumatic gearbox oil filler allows for the easy and professional filling of gearboxes and it is also 
suitable for other non-corrosive liquids. The kit includes 15 gearbox oil filling adaptors.
15PC ADAPTER:
   FORD 1/8-27(NPT)
   UNIVERSAL BMW, HONDA, NISSAN
   VW/AUDI
   VA/AUDI, PORSCHE
   VW/AUDI, MINI COOPER M10X1.0
   VW/AUDI DSG M24X1.5
   VW/AUDI CVT M22X1.5
   MERCEDES M12 X 1.5
   SKODA M18X1.5
   AUDI/VW, SKODA M30X1.5
   UNIVERSAL FLEXIBLE 300mm
   VOLVO 5/16-24(UNF)
   TOYOTA, LEXUS M18X1.5
   NISSAN, INFINITY M8X1.0
   ATF-ADAPTER V.W PASSAT

TECHNICAL DATA
• Pressure gauge for filling pressure monitoring
• 3 bar safety valve
• Tank size: 10 l
• Air consumption: 57 l/min
• Air connection: 1/4"