Chrome plated steel body.

Ideal for transferring non-corrosive fluids of light to medium viscosity, such as Motor Oils, Transmission Fluid, Heating Oils, Machine Oils, Automotive Additives, Cleaning Solutions, Solvents, Thinner, Diesel Fuel, Kerosene, etc.

Supply with 2" bung adapter to fit most 15, 30 and 55 gallon drums.

Self-priming unit, dispenses approximately 21 oz per full stroke.

Discharge spout can be rotated 180° and can be removed to expose garden hose threaded outlet.

Pump Type: Piston

Flow: 21 oz / Stroke in full

Maximum Fluid Temperature: 140˚F / 60˚C

Mounting: 2" MNPT Bung Adapter

Suction Tube Length: 37"

Suction Tube: 1-1/2" OD

Inlet: 1-1/2" OD

Outlet: 3/4" OD Curved Spout

Wetted Parts: Steel & Polyethylene

Maximum Viscosity: 2,000 SSU

Commonly used for dispensing or transferring non-corrosive and petroleum based fluids, such as Diesel, Kerosene, Transmission Fluid, Machine Oil, Lube Oil, Fuel Oil, Anti-Freeze, etc.

Ideal for heavy-duty use in industrial, automotive and agricultural applications.

Supply with 2" bung adapter and 3-piece plated steel suction tube to fit most 15, 30 and 55 gallon drums.

Self-priming unit.

Do not use with organic solvents, alkalis, acids, petrol and water-based fluids.

Liquids do not with dirt to ensure pump life.

Pump Type: Rotary - Vane

Flow: 8 oz / Stroke

Maximum Fluid Temperature: 140˚F / 60˚C

Mounting: 2 inch MNPT Bung Adapter

Suction Tube Length: 40" Maximum

Inlet: 1-1/4" O.D.

Outlet: 1" O.D. Curved Spout

Wetted Parts: Cast Iron, Steel & NBR

Maximum Viscosity: 2,000 SSU

Making top up jobs quicker and easier.

Ideal for topping up difficult to access oiling points on motor vehicles, lawn mowers, chain saws, outboard and two stroke motors, and other add jobs around the workshop and home.

Suitable for all oils, automatic transmission fluids, brake fluids and general purpose cleaners, the self contained unit will prevent oil contamination when not in use.

Capacity: 1 L

0.13 oz per stroke

Type: Piston - Spring Operated

Maximum Fluid Temperature: 140˚F / 60˚C

Wetted Parts: Steel, Aluminum & PVC

Transferring fuel from vehicle to vehicle.

Pumping fuel into the heater.

Transferring water from fish tank.

Transferring fluid from the tank.

Tube Length: 36" of each side.

Max. Flow: 2.8 liter per minute

Wetted Parts: Rubber, Polypropylene, PVC & 304SS

Commonly used for dispensing or transferring non-corrosive and petroleum based fluids, such as Diesel, Kerosene, Transmission Fluid, Machine Oil, Lube Oil, Anti-Freeze, etc.

Ideal for heavy-duty use in industrial, automotive and agricultural applications.

Supply with 2" & 1-1/2" bung adapter and a self-adjusting telescopic suction tube to fit most 15, 30 and 55 gallon drums.

Self-priming unit.

Discharge spout can be rotated 180˚ and can be removed to expose garden hose threaded outlet.

Do not use with organic solvents, alkalis, acids, petrol and water-based fluids.

Pump Type: Lever

Flow: 11 oz per stroke

Maximum Fluid Temperature: 140˚F / 60˚C

Mounting: 1-1/2" & 2" MNPT Bung Adapter

Suction Tube Length: 35"

Inlet: 1" O.D.

Outlet: 3/4" O.D. Curved Spout

Wetted Parts: Aluminum, Steel, PE & NBR

Maximum Viscosity: 1,000 SSU