• HYDRAULIC GEAR PUMPS

All Hydraulic Gear Pumps are thoroughly tested and examined before being supplied to guarantee optimal levels of functionality and duration.

These hydraulic gear pumps can work under heavy operating conditions and transmit high hydraulic power and in turn feature good hydraulic, mechanical, and volumetric efficiency, low noise level and, last but not least, compact dimensions.

Generally these gear pumps usually consist of a gear pair supported by two aluminium bushes, a body, a securing flange and a cover. The shaft of the driving gear projecting beyond the flange mounts a twin-lip seal ring.

The body of the pump is made of special hi-resistant aluminium alloy obtained through extrusion process, whilst flange and cover are made out of spheroidal cast iron; this in order to ensure minimized deformation even when subject to high pressure, be it continuous, intermittent or peak pressure. Gears are made of special steel. Their manufacturing process includes case-hardening and quench hardening. Gears are then grounded and fine finished to have a high degree of surface finishing.

• OIL PUMPS

Autopumps supplies and produces a vast range of oil pumps to meet the changing demands of the modern automotive aftermarket, covering engine sizes from 600cc -12000cc for everything from passenger vehicle cars to agricultural and heavy duty commercial vehicles.

Autopumps work closely with some of the world’s leading suppliers and manufacturers to maintain the high quality required for these industrious engine parts. As the mainstay of the engine lubrication system, all oil pumps are batch tested in our own Quality Control department to ensure the product meets our strict ISO9001:2008 certified standards.

• TRANSMISSION PUMPS

Our large range of rotor type fixed displacement pumps are built to last by using only the highest quality materials, together with standards and procedures that reinforce excellence.

Our portfolio is the result of our extensive experience of transmission pumps, including long-term relationships with customers and suppliers. It is based on a strong commitment to research and development, as well as industry-wide standards, and addresses both customers’ business and technology demand.

• WATER PUMPS

With a range of 370 pumps for trucks, tractors and off highway, Autopump's CV is satisfying the needs and expectations of its customers whilst also fulfilling requirements of the lowest cost and the best service.

Our Management System covers the manufacture of water pumps and is based on the PREVENTION of defects and problems. All pumps are constantly tested throughout their production process. Fitment, running, noise levels and leakage have all been tested to the highest standards.

•  WATER PUMP REPAIR KITS

To complement our large range of commercial water pumps we offer a popular range of Water Pump Kits containing seals, bearings and the necessary parts to rebuild these pumps.  Our customers will have the complete assurance that the water pumps give the same excellent service life as a new pump.

Premium aftermarket Timing Chain Kits for 2000+ applications

Our wide range of timing chain kits include chain, tensioners, gears, guide rails, bolts and sprockets. All components are manufactured by Autopump's carefully selected OE certified manufacturing partner, to guarantee consistent quality and interoperability.
 
Every component is coded and exhaustively batch-tested by our engineering team in our own in-house testing facilities to assure compliance with OE standards and tolerances. We use Rockwell and Vickers hardness reads for comparison with the corresponding OE product. All chains are additionally pre stretched to shorten the running-in period.

• Competitively priced

• Exhaustive in house testing and quality control

• Certified OE supplier

• All parts coded as per ISO 9001:2008 standards

Autopumps work with leading manufacturers and the latest manufacturing technologies to produce Camshafts to a wide range of material specifications.

Chilled iron, steel, induction iron and sintered have become key components in the full array of products offered for today’s varied car parc. Our range has expanded dramatically in line with manufacturing capability developments and we now offer one of the largest ranges of Camshafts available to the worldwide automotive aftermarket.

All O/E standards are maintained by our manufacturers using the latest CNC and Adcol technology, providing the necessary finish required for these component parts to Q5000 & IS9002 standards.

Autopumps offers a comprehensive range of gaskets using their very own established joint venture partners already supplying the O/E markets. Autopumps has been able to expand their range to complement the market by supplying gaskets for classic vehicles and for today's modern and expanding car parc whilst maintaining the quality without deferring from the standards set by O/E products.

Autopumps also has the ability to develop bespoke gaskets for specialist engines in copper, MLS (Multi Layered Steel) and composite material incorporating all the latest silicone based coatings providing the newest sealing technology. Many specialist rubber mouldings, oil seals and components can be produced in small or large production runs from drawings or samples supplied. These can include items from rubber grommets to door moulding sets.