The HD nozzles of the WS-400 clear enable reliable and efficient application of clearcoats. The application possibilities are more flexible (spraying distance) thanks to new nozzle technology 2.0. A flat and even spray pattern is achieved without a central wet core. The uniform overlap leads to an optimal overall application of the material.

The OBS and BF nozzles of the WS-400 base were specially developed for basecoat applications under different climatic conditions. The spray pattern is characterised by a long, flat pattern that is more defined and fuller in the centre and softer at the upper and lower edges.

The ETS nozzles of the LS-400 base have been specially developed for basecoat applications under different climatic conditions. The LS-400 base is the HVLP model specially designed for the application of water- and solvent-based basecoats. The slightly larger droplets remain uniform in size and shape thanks to the pre-atomising nozzles. Thanks to the lower energy required for atomisation, this paint spray gun enables consistently high transfer efficiency with high material savings potential.

The Series 2 spray guns are available with directly integrated digital pressure gauge DPG-1 or without pressure gauge. 

LPH-80

Professional spray gun with LVLP technology

for Spot Repair (smallest repairs)

W-300WB

Professional spray gun with pre atomization technology

for Smart Repair (small repairs)

For smallest repairs up to a size of about 3.5 cm, partial repair work and for the removal of hard-to-reach areas, it is best to go directly with LPH-80 for Spot Repair. LPH-80 uses LVLP low pressure technology (low air volume, low pressure). The paint material is nebula reduced with a low nozzle pressure and low air consumption extremely fine and evenly atomized. The overspray formation is very low. As a result, the user - even with sensitive colors - runs no danger of "silting up" in the outlet zones.

W-300WB for Smart Repair is particularly suitable for the blending or color matching as well as the full painting of small parts such as rims, mirror caps and spoilers. It works using the proven pre atomization technology. Perfect surfaces and extremely low material consumption are guaranteed. Due to the soft spray pattern, transitions are barely visible. The application is very easy to control. Basecoat is painted over the damaged area and then completely painted over with clearcoat. Despite the low air requirement of just 190 Nl / min, it delivers a very fine atomization with a uniform wet core without disturbing silting.

Premium filler spray gun with pre atomization technology

for application of filler

LPH-300 is a low-pressure filler gun that achieves the atomization of a high-pressure gun and creates an impeccable substrate for the topcoat. Using proven pre atomization technology, it promises significant material savings through LVLP low pressure technology (low air volume, low pressure) while operating at a very low air requirement. Despite low air consumption, the atomization is noticeably finer and smoother. The spray material is applied selectively, resulting in less overspray. Achieved is a high and effective material transfer through a large uniform pattern core.

• DPS-120 Double diaphragm pumps
• Paint pressure tanks in different sizes and designs
• WS-200 professional pressure spray gun series
• Twin hoses in different sizes

DPS-120 double diaphragm pumps in a compact design are the perfect choice for pumping liquid media (solvents and water-based paints) to supply pressure spray guns. The reliable pump motor combined with the double flushing air circuit promises an excellent surface finish. The pneumatic forced reversal prevents the pump from stopping. Low-dead volume material channels and easily dismountable pump body facilitate cleaning and inspection.

Paint pressure tanks for the supply of pressure spray guns are available in different sizes and designs with or without pneumatic agitator.

WS-200 series are the latest-generation professional pressure spray guns. They are suitable for use with double diaphragm pumps or paint pressure tanks or pressure-fed low-pressure systems. Available as WS-200SP with proven pre atomization technology of the latest generation and WS-200FT with traditional round nozzle for high quality results.

Professional spray gun with pre atomization technology

for application of UV coat

(with UV-opaque gravity cup and air cap protection)

W-300WB UV works very low overspray using the proven pre atomization technology. Perfect surfaces and extremely low material consumption are guaranteed. Due to the soft spray pattern, transitions are barely visible. The application is very easy to control. Despite the low air requirement of just 190 Nl / min, it delivers extremely fine atomization even in the edge zones with a uniform wet core. Even the first spray coat ensures a homogeneous surface and avoids overcoating.