Heavy Duty Lifting Table

Unique lifting system

The Stertil-Koni SKYLIFT is completely vertical in its lifting operation. There is no overhang, meaning that this lift takes up less space than a parallelogram vehicle lift. Due to the unique Y-shaped construction of the lift supports and base plates, the forces are diverted as effectively as possible. This allows for a relatively light construction. Furthermore, this Y-shaped construction allows ample room for free movement under the platforms.

There are no cross beams, scissors or columns to get in the way. The mechanic is therefore able to move about freely under the platforms, something which is impossible with a traditional scissor lift.

Specifications

• ebright Smart Control System, providing visual information about the lifting process
• Vertical lifting
• Programmable lifting height
• Error diagnosis system
• Possibility to have the vehicle lift lowered manually in case of power failure

Options

• Jacking beams available in 12 & 16 t capacity
• Wash bay model
• Air supply set
• Two speed lowering
• Remote control with 10 m cable
• LED lighting
• Anti-slip plates
• 1250 mm long platform extensions
• Platform extensions suitable for wheel alignments
• Synchronisation set for tandem configuration
• Recess cover plates for flush-mounted models

Maximum safety

• ANSI/ALI-ALCTV certified (USA)
• CSA certified (Canada)
• CE certified (Europe)
• Low-voltage control box
• Automatic protection against overloading
• Independent mechanical locking, beginning at 90 mm above floor level
• Microprocessor-controlled synchronisation system

More information

For more or specific information about the Stertil-Koni SKYLIFT or one of the other quality products provided by Stertil-Koni, please feel free to get in contact with us. We will be happy to help you.

*Technical specification are available on: www.stertil-koni.nl

Surface mounted

Flush mounted

*Flexible dimensions depend on the requirements of the customer

Model SKY.200, SKY.250, SKY.350

Lifting capacity 20,000kg, 25,000kg, 35,000kg

Lifting system hydraulic

Lifting height 1750 mm

Lifting time 90 sec

Available platform lengths 7-8-9mtr 8-9-10-12-14.5 mtr

Motor capacity 9 kW

The Stertil-Koni DIAMONDLIFT telescopic piston lifts sets a new industry standard for in-ground lifts. The DIAMONDLIFT gives you the choice in a variety of workshop situations. Whether you are building a new workshop; want to renovate or have difficult building conditions, there is a Stertil-Koni in-ground DIAMONDLIFT which can be configured specifically for your circumstances.

The cassette-less platform lift from Stertil-Koni, the DIAMOND WORLD version, has a frame which can be installed in a concrete pit. These models are available with or without park position recesses and both with the robust aluminium rolling covers or with more economical sliding plates.

All of these versions have the same unique features of the original DIAMONDLIFT in common:

• No power units in the pit
• Extremely low quantities of oil in the pit
• Oil is biodegradable
• No chains but very reliable rack and pinion drive
• Low and flat surface bolsters
• Easy and intuitive operation with ebright Smart Control System

Together with the Unique, patented Stertil-Koni ECOLIFT, Stertil now has one of the widest and deepest ranges of in-ground lifts for commercial vehicles in the market.

Ultra-Shallow Construction

Recognized as the industry’s first ultra-shallow, full-rise, in-ground lifting system, ECOLIFT is available in a 2-scissor or 3-scissor configuration with total lifting capacity of 27,000 kg. and 40,500 kg.

The shallow pit construction has a depth of just 1/2 of the lifting height.
With an installation depth of just 0,87 m. the ECOLIFT is the answer to situations with bedrock, water table or unstable soil conditions.

Easy Installation

Not only is the installation depth extremely low, there are also no concrete embedded components, saving installation time and money. Optionally, the entire in-ground lift can completely be moved to another facility. The ECOLIFT is the only re-locatable in-ground lifting system in the world.

Continuous Recess

The ECOLIFT accommodates vehicles with extremely low ground clearance. Because of the Continuous Recess System, the recessed front superstructure traverses flush to the floor over the entire length of the front pit travel range. So there is no risk of damaging the vehicle during positioning of the movable carriage and superstructure underneath the vehicle.

Innovative design

The hydraulic system is mounted in the freestanding control console and is easily accessible for maintenance or service. An industry proven electronically controlled synchronization system ensures smooth and safe lifting and lowering even with unevenly loaded vehicles. Other features include programmable lifting height and the audible warning.

ebright Smart Control System

The revolutionary ebright Smart Control System combines intuitive ease of use with maximum visual information about the lifting process.

Maximum safety and ultimate ergonomics
Stertil-Koni offers various models of mobile column vehicle lifts for inspection, maintenance and repair of your entire vehicle fleet. For trucks and truck-trailer combinations, buses, military and defence vehicles, ground support equipment (GES), and agricultural vehicles.

Mobile column vehicle lifts are ideal in busy workshops where the vehicle lifts need to be frequently relocated. Also an ideal solution for rented workshops, as mobile columns do not require any construction or civil works. Lifting capacities range from 6,500-17,500 kg per mobile column lift. Up to 32 columns can be connected in one single set and fully synchronised - all with no interconnecting cables, so no tripping hazards.

• Drive-away protection
• Fully independent mechanical locking system for ultimate safety
• Wireless controlled configuration for synchronised smooth lifting and lowering, even in cases of an extremely uneven load distribution
• Locking pawl engaged by gravity. The locking system is always active, even when the column is turned off
• Maximised vehicle-to-column distance
• Automatic overload protection
• Each column has an emergency stop
• Operation with ebright Smart Control System
• Low voltage system
• Splash-proof electrical system (IP 65)
• Low surface pressure wheels
• Even longer lifting cycles and less battery-charging with the environmentally-friendly regenerative EARTHLIFT® version, available in lifting capacities of 8,500 kg, 10,000 kg and 13,000 kg per column
• Range of adapters and accessories

Stertil-Koni can provide advice depending on your workshop requirements.

Unique lifting system

The Stertil-Koni SKYLIFT is completely vertical in its lifting operation. There is no overhang, meaning that this lift takes up less space than a parallelogram vehicle lift. Due to the unique Y-shaped construction of the lift supports and base plates, the forces are diverted as effectively as possible. This allows for a relatively light construction. Furthermore, this Y-shaped construction allows ample room for free movement under the platforms.

There are no cross beams, scissors or columns to get in the way. The mechanic is therefore able to move about freely under the platforms, something which is impossible with a traditional scissor lift.

Specifications

• ebright Smart Control System, providing visual information about the lifting process
• Vertical lifting
• Programmable lifting height
• Error diagnosis system
• Possibility to have the vehicle lift lowered manually in case of power failure

Options

• Jacking beams available in 12 & 16 t capacity
• Wash bay model
• Air supply set
• Two speed lowering
• Remote control with 10 m cable
• LED lighting
• Anti-slip plates
• 1250 mm long platform extensions
• Platform extensions suitable for wheel alignments
• Synchronisation set for tandem configuration
• Recess cover plates for flush-mounted models

Maximum safety

• ANSI/ALI-ALCTV certified (USA)
• CSA certified (Canada)
• CE certified (Europe)
• Low-voltage control box
• Automatic protection against overloading
• Independent mechanical locking, beginning at 90 mm above floor level
• Microprocessor-controlled synchronisation system

More information

For more or specific information about the Stertil-Koni SKYLIFT or one of the other quality products provided by Stertil-Koni, please feel free to get in contact with us. We will be happy to help you.

*Technical specification are available on: www.stertil-koni.nl

Surface mounted

Flush mounted

*Flexible dimensions depend on the requirements of the customer

Model SKY.200, SKY.250, SKY.350

Lifting capacity 20,000kg, 25,000kg, 35,000kg

Lifting system hydraulic

Lifting height 1750 mm

Lifting time 90 sec

Available platform lengths 7-8-9mtr 8-9-10-12-14.5 mtr

Motor capacity 9 kW

The Stertil-Koni DIAMONDLIFT telescopic piston lifts sets a new industry standard for in-ground lifts. The DIAMONDLIFT gives you the choice in a variety of workshop situations. Whether you are building a new workshop; want to renovate or have difficult building conditions, there is a Stertil-Koni in-ground DIAMONDLIFT which can be configured specifically for your circumstances.

The cassette-less platform lift from Stertil-Koni, the DIAMOND WORLD version, has a frame which can be installed in a concrete pit. These models are available with or without park position recesses and both with the robust aluminium rolling covers or with more economical sliding plates.

All of these versions have the same unique features of the original DIAMONDLIFT in common:

• No power units in the pit
• Extremely low quantities of oil in the pit
• Oil is biodegradable
• No chains but very reliable rack and pinion drive
• Low and flat surface bolsters
• Easy and intuitive operation with ebright Smart Control System

Together with the Unique, patented Stertil-Koni ECOLIFT, Stertil now has one of the widest and deepest ranges of in-ground lifts for commercial vehicles in the market.

Ultra-Shallow Construction

Recognized as the industry’s first ultra-shallow, full-rise, in-ground lifting system, ECOLIFT is available in a 2-scissor or 3-scissor configuration with total lifting capacity of 27,000 kg. and 40,500 kg.

The shallow pit construction has a depth of just 1/2 of the lifting height.
With an installation depth of just 0,87 m. the ECOLIFT is the answer to situations with bedrock, water table or unstable soil conditions.

Easy Installation

Not only is the installation depth extremely low, there are also no concrete embedded components, saving installation time and money. Optionally, the entire in-ground lift can completely be moved to another facility. The ECOLIFT is the only re-locatable in-ground lifting system in the world.

Continuous Recess

The ECOLIFT accommodates vehicles with extremely low ground clearance. Because of the Continuous Recess System, the recessed front superstructure traverses flush to the floor over the entire length of the front pit travel range. So there is no risk of damaging the vehicle during positioning of the movable carriage and superstructure underneath the vehicle.

Innovative design

The hydraulic system is mounted in the freestanding control console and is easily accessible for maintenance or service. An industry proven electronically controlled synchronization system ensures smooth and safe lifting and lowering even with unevenly loaded vehicles. Other features include programmable lifting height and the audible warning.

ebright Smart Control System

The revolutionary ebright Smart Control System combines intuitive ease of use with maximum visual information about the lifting process.