A few of many advantages offered by Infrared Arch Dryer are the following:

• the speed of drying, which is guaranteed by modern infrared technology
• the excellent quality of the final result, thanks to the contactless measurement system with automatic temperature control on the surface to be dried
• the considerable savings in terms of actual operating costs

In comparison with other models currently on the market, Arch Dryer is very compact and extremely versatile.

It is able to move in all directions: longitudinal, transversal and vertical (with a maximum range of 1.2 m) and can rotate on itself.
In combination with its precise and reliable distance sensors, it can perfectly follow the vehicle shape or the parts that have to be dried.

It can be installed in preparation stations or in spray booths. This system can handle up to 6 different preparation stations side by side, Arch Dryer can work in any of these preparation stations.
Furthermore, it can also be installed in single or double spray booths and can be used alone or in combination with a second system to create a complete arch (Arch Dryer Plus).

The control unit is placed outside the working area and, thanks to the large touch screen display, it is possible to manage and control all processing operations. The control software is efficient, very intuitive and easy to use.

MAIN TECHNICAL SPECIFICATIONS

• Number of ceiling lights: 3, with 3 short-wave paint dryers;
• power supply: 400v 3F 50-60 Hz;
• power: 9 x 1500 W;
• Control mode: fully computerised

OTHER SPECIFICATIONS

• Temperature and distance control;
• personalization of the drying programs;
• no. 5 stepper motors for the longitudinal movement

The paint mix room ‘Tinto Box’ was created for paint preparation and mixing with a present operator. It can contain the tintometer and paints, according to the quantities prescribed by the control authorities (e.g. Local Health Authority and Fire Department). It is made with plastic-coated sheet metal panels internally and externally and with internal insulation.

Tinto box comes equipped with:

• centrifugal fan with proper flow rate;
• electric motor with direct drive;
• control board for plant control.

AVAILABLE OPTIONAL EQUIPMENT:

• LED lights;
• rock wool paneling;
• filtering corner for paint tests

Straightening bench to reapair small and medium size damages. The frame firmness allows a quick and simple positioning of any type of vehicle by using 4 universal clamps only, without need for ramps.

MAIN TECHNICAL SPECIFICATIONS:

• Capacity: 3.000 kg
• Minimum height from the floor: 140 mm
• Maximum height from the floor: 1,312 mm
• Lifting time: 60 sec.
• Power supply: 230 – 400 V | 50 – 60 Hz | three-phase
• Weight: 1,400 kg
• Dimensions: 3,450 x 1,000 x 750 (h) mm

AVAILABLE OPTIONAL EQUIPMENT:

• Measuring devices;
• Clamps;
• Tool trolley;
• Chain;
• Additional vertical pulling arm;
• Cover for straightening bench installed at floor level

The company Termomeccanica GL manufactures different and customised spray booth models and solutions, in order to meet customers‘ needs.

All visitors interested in visiting our stand at the trade fair „Automechanika 2024“ in Frankfurt am Main can find and know more about our endothermic hybrid spraybooth, model 'Eurotek Hybrid‘.

Our expert team will be gladly at your disposal to inform you about our wide product range.

MAIN TECHNICAL SPECIFICATIONS:

• Insulated panelling;
• air exhaust on 3 grid rows with adjustable frames, for air flow calibration and paint-stop filters (on masonry works);
• 3-wings front door;
• ceiling filters and upper lighting with 2 rows of ceiling lighting with 4 fluorescent neon tubes (or LED lights), inclination 30°;
• air intake plenum chamber;
• air dispenser in the air intake plenum chamber;
• air regulating damper;
• electromechanical control unit;
• electric or water battery;
• direct flame burner;
• units with one inlet motor and fan as well as one outlet motor and fan;
• endothermic panels in the spray booth on lateral, rear and top sides at 180 °C;

AVAILABLE OPTIONAL EQUIPMENT:

• Metal basement;
• fully gridded metal basement;
• additional service door;
• roller shutter instead of entering of exiting door;
• metal basement with internal fixed ramp;
• pneumatic ramp;
• total air recycling;
• touch screen control unit with inverter system and remote assistance;
• heat recovery system;
• lift;

MAIN ADVANTAGES

• Significantly shorter drying times;
• The total electrical power varies according to the spray booth's size;
• The spray booth is equipped with infrared thermometer

A few of many advantages offered by Infrared Arch Dryer are the following:

• the speed of drying, which is guaranteed by modern infrared technology
• the excellent quality of the final result, thanks to the contactless measurement system with automatic temperature control on the surface to be dried
• the considerable savings in terms of actual operating costs

In comparison with other models currently on the market, Arch Dryer is very compact and extremely versatile.

It is able to move in all directions: longitudinal, transversal and vertical (with a maximum range of 1.2 m) and can rotate on itself.
In combination with its precise and reliable distance sensors, it can perfectly follow the vehicle shape or the parts that have to be dried.

It can be installed in preparation stations or in spray booths. This system can handle up to 6 different preparation stations side by side, Arch Dryer can work in any of these preparation stations.
Furthermore, it can also be installed in single or double spray booths and can be used alone or in combination with a second system to create a complete arch (Arch Dryer Plus).

The control unit is placed outside the working area and, thanks to the large touch screen display, it is possible to manage and control all processing operations. The control software is efficient, very intuitive and easy to use.

MAIN TECHNICAL SPECIFICATIONS

• Number of ceiling lights: 3, with 3 short-wave paint dryers;
• power supply: 400v 3F 50-60 Hz;
• power: 9 x 1500 W;
• Control mode: fully computerised

OTHER SPECIFICATIONS

• Temperature and distance control;
• personalization of the drying programs;
• no. 5 stepper motors for the longitudinal movement

The paint mix room ‘Tinto Box’ was created for paint preparation and mixing with a present operator. It can contain the tintometer and paints, according to the quantities prescribed by the control authorities (e.g. Local Health Authority and Fire Department). It is made with plastic-coated sheet metal panels internally and externally and with internal insulation.

Tinto box comes equipped with:

• centrifugal fan with proper flow rate;
• electric motor with direct drive;
• control board for plant control.

AVAILABLE OPTIONAL EQUIPMENT:

• LED lights;
• rock wool paneling;
• filtering corner for paint tests

Straightening bench to reapair small and medium size damages. The frame firmness allows a quick and simple positioning of any type of vehicle by using 4 universal clamps only, without need for ramps.

MAIN TECHNICAL SPECIFICATIONS:

• Capacity: 3.000 kg
• Minimum height from the floor: 140 mm
• Maximum height from the floor: 1,312 mm
• Lifting time: 60 sec.
• Power supply: 230 – 400 V | 50 – 60 Hz | three-phase
• Weight: 1,400 kg
• Dimensions: 3,450 x 1,000 x 750 (h) mm

AVAILABLE OPTIONAL EQUIPMENT:

• Measuring devices;
• Clamps;
• Tool trolley;
• Chain;
• Additional vertical pulling arm;
• Cover for straightening bench installed at floor level