The paint mix room ‘Tinto Box’ was created for paint preparation and mixing with a present operator. It can contain the tintometer and paints, according to the quantities prescribed by the control authorities (e.g. Local Health Authority and Fire Department). It is made with plastic-coated sheet metal panels internally and externally and with internal insulation.

Tinto box comes equipped with:

• centrifugal fan with proper flow rate;
• electric motor with direct drive;
• control board for plant control.

AVAILABLE OPTIONAL EQUIPMENT:

• LED lights;
• rock wool paneling;
• filtering corner for paint tests

Straightening bench to reapair small and medium size damages. The frame firmness allows a quick and simple positioning of any type of vehicle by using 4 universal clamps only, without need for ramps.

MAIN TECHNICAL SPECIFICATIONS:

• Capacity: 3.000 kg
• Minimum height from the floor: 140 mm
• Maximum height from the floor: 1,312 mm
• Lifting time: 60 sec.
• Power supply: 230 – 400 V | 50 – 60 Hz | three-phase
• Weight: 1,400 kg
• Dimensions: 3,450 x 1,000 x 750 (h) mm

AVAILABLE OPTIONAL EQUIPMENT:

• Measuring devices;
• Clamps;
• Tool trolley;
• Chain;
• Additional vertical pulling arm;
• Cover for straightening bench installed at floor level

The company Termomeccanica GL provides numerous customised models and solutions, in order to meet customers' need, offering a wide range of equipment as well.

MAIN TECHNICAL SPECIFICATIONS (which may differ, according to the chosen model)

• filtering air intake plenum chamber;
• neon or LED lights;
• supporting structure with poles;
• purifier or exhaust unit;
• control unit

AVAILABLE OPTIONAL EQUIPMENT:

• manual or motorized front and/or rear curtains;
• manual or motorized side curtains;
• additional service door;
• total air recycling;
• cabinets (e.g. with shelves and paper holder);
• exhaust boxes;
• suction tower;
• suction arm;
• trolleys;
• pneumatic and electric random orbital sander;
• endothermic panel kit;
• wheeled or suspended infrared paint dryers;
• manual or motorized mobile arm with infrared paint dryers;
• lifts;
• welding machines

A few of many advantages offered by Infrared Arch Dryer are the following:

• the speed of drying, which is guaranteed by modern infrared technology
• the excellent quality of the final result, thanks to the contactless measurement system with automatic temperature control on the surface to be dried
• the considerable savings in terms of actual operating costs

In comparison with other models currently on the market, Arch Dryer is very compact and extremely versatile.

It is able to move in all directions: longitudinal, transversal and vertical (with a maximum range of 1.2 m) and can rotate on itself.
In combination with its precise and reliable distance sensors, it can perfectly follow the vehicle shape or the parts that have to be dried.

It can be installed in preparation stations or in spray booths. This system can handle up to 6 different preparation stations side by side, Arch Dryer can work in any of these preparation stations.
Furthermore, it can also be installed in single or double spray booths and can be used alone or in combination with a second system to create a complete arch (Arch Dryer Plus).

The control unit is placed outside the working area and, thanks to the large touch screen display, it is possible to manage and control all processing operations. The control software is efficient, very intuitive and easy to use.

MAIN TECHNICAL SPECIFICATIONS

• Number of ceiling lights: 3, with 3 short-wave paint dryers;
• power supply: 400v 3F 50-60 Hz;
• power: 9 x 1500 W;
• Control mode: fully computerised

OTHER SPECIFICATIONS

• Temperature and distance control;
• personalization of the drying programs;
• no. 5 stepper motors for the longitudinal movement

The paint mix room ‘Tinto Box’ was created for paint preparation and mixing with a present operator. It can contain the tintometer and paints, according to the quantities prescribed by the control authorities (e.g. Local Health Authority and Fire Department). It is made with plastic-coated sheet metal panels internally and externally and with internal insulation.

Tinto box comes equipped with:

• centrifugal fan with proper flow rate;
• electric motor with direct drive;
• control board for plant control.

AVAILABLE OPTIONAL EQUIPMENT:

• LED lights;
• rock wool paneling;
• filtering corner for paint tests

Straightening bench to reapair small and medium size damages. The frame firmness allows a quick and simple positioning of any type of vehicle by using 4 universal clamps only, without need for ramps.

MAIN TECHNICAL SPECIFICATIONS:

• Capacity: 3.000 kg
• Minimum height from the floor: 140 mm
• Maximum height from the floor: 1,312 mm
• Lifting time: 60 sec.
• Power supply: 230 – 400 V | 50 – 60 Hz | three-phase
• Weight: 1,400 kg
• Dimensions: 3,450 x 1,000 x 750 (h) mm

AVAILABLE OPTIONAL EQUIPMENT:

• Measuring devices;
• Clamps;
• Tool trolley;
• Chain;
• Additional vertical pulling arm;
• Cover for straightening bench installed at floor level

The company Termomeccanica GL provides numerous customised models and solutions, in order to meet customers' need, offering a wide range of equipment as well.

MAIN TECHNICAL SPECIFICATIONS (which may differ, according to the chosen model)

• filtering air intake plenum chamber;
• neon or LED lights;
• supporting structure with poles;
• purifier or exhaust unit;
• control unit

AVAILABLE OPTIONAL EQUIPMENT:

• manual or motorized front and/or rear curtains;
• manual or motorized side curtains;
• additional service door;
• total air recycling;
• cabinets (e.g. with shelves and paper holder);
• exhaust boxes;
• suction tower;
• suction arm;
• trolleys;
• pneumatic and electric random orbital sander;
• endothermic panel kit;
• wheeled or suspended infrared paint dryers;
• manual or motorized mobile arm with infrared paint dryers;
• lifts;
• welding machines