KECO's NEW K-Tower is a powerful and versatile Pull Tower for correcting large damage with Glue Pull Repair. The lightweight aluminum construction allows easy location changes with mobility and simple setup in minutes. Angle adjusting post with increased height are features only found on the KECO K-Tower. The added accessories from KECO give this vacuum pull tower more flexibility, pulling strength, and adjustment for faster GPR repairs than any other system available.

• Post Angle Adjustment- rotation of 30 degrees left or right (60 degrees total) gives the K-Tower unmatched versatility. This adjustment reduces the need to turn off the air supply and reposition the base when pulls from multiple locations on the panel are required, creating efficiency
• Larger Aluminum Base - the increased base area creates the strongest pulling tower available. The design is lightweight and mobile for versatility and fast setup
• Finite Tension Adjustment - once fast or rough-out adjustments are made with the ratchet, the finite adjustment knobs allow incremental adjustments for finer GPR corrections in combination with knockdown work, only found with KECO
• Upper & Lower Saddles - additional versatility added with dual saddles, allowing use above or below damage
• Crown Holder - adjustable crown holder rod and foot allows for flexible setup to apply pressure to crown areas, support the tower against rigid features on the vehicle, or use on the ground to help stabilize for added pulling strength

*NEW Powerful Lateral Tension Technology from KECO!

The K-Power is KECO's most powerful lateral tension innovation. The K-Power applies force extremely low to the panel with controlled finesse to Port-a-Power strength. This allows for the cleanest lateral tension possible designed to maximize the output without the risk of creating collateral damage.

Multiple shoes give technicians flexibility and options for applying force to flat panels and body lines with perpendicular and in-line configurations.

Applying the K-Power force in between (2) LTT beams increases rough-out capabilities.

• Beam - 36" high strength, yet lightweight, extruded aluminum beam with precision machined slide surfaces
• Drive Rod - internal 1/2" threaded drive rod to minimize deflection at maximum power
• Durable Legs & Shoes - high-strength steel, precision machined legs and shoes provide strength and durability. Shoes designed to accommodate included centipede tabs, as well as adaptation to KECO LTT-Beams
• Hex Drive - standard 1/4" external drive accommodates power tools for fast setup and impact power during applied tension
• Includes 6 KECO Blue Centipede Tabs - (2) each 50mm x 54 mm (2 x 2 in) rigid centipedes, (2) each 50mm x 105 mm (2 x 4 in), and (2) each 50mm x 156 mm (2 x 6 in) rigid centipedes with lateral-pull hole

NEW from KECO!! The Kwik-Stick provides technicians with the powerful leverage necessary to pull large dents and collision damage from panels, rockers, doors, seams, body lines, and more. Combine the Kwik-Stick with high-strength Flex Collision glue and tabs to pull the deepest dents and collision damage from virtually all metals used in vehicle composition.

• Pivoting Vacuum Plate Fulcrum Foot - pivots over 210 degrees for versatility. The on/Off air valve makes it easy to move quickly. Locking pin to secure the plate for storage and protection of seal
• Locking Sliding Saddle - angles up to 60º and slides 52.5" allowing pulls on hard-to-reach places like rocker panels
• Comfort Grip Handle - creates ergonomic grip for leverage
• Includes 1 Chain - Adjustable pickup point and saddle for more adjustability during repair
• Includes 1 Locking Adapter - supports all KECO Centipede crease, dead center, and lateral tabs when used with a carabiner

KECO's L2E is the most comprehensive glue pull repair system available to body shop technicians. This system includes the industry's best lifting tools, a powerful KECO shop light, and a GPR tool cart. This is the only option for those looking for a complete GPR solution to improve shop efficiency.

Finish your repairs fast with minimal, if any, body filler. Tools are easily stored and organized on the cart while the TabPrints organizer keeps your tabs arranged and ready to pull.

• Level 2E System Toolset - The complete shop system for technicians and shop owners wanting the complete GPR solution ideal for repairing damage throughout the repair continuum, using as little body filler as possible and preparing for paint quickly
• Rough-Out & Large Damage - K-Beam® and K-Beam® Jr. with added height legs provide double-action pulls and the K-Bar® executes leverage pulls that move tons of metal FAST
• Small & Detail Finish Corrections - Robo Lifter and Precision Pulling Base correct small and x-small damage with precise control when combined with Dead Center® finishing tabs
• Lighting - KECO Shop Light enhances the technician's ability to see damage on clear coat and various paint colors to enable to place tabs for pulls with accuracy and control
• Storage & Organization - KECOs GPR Cart, TabPrints™ organizer, along with the Z-Channel™ platform store glue gun, heat gun, thermometer, and glue to keep tools and tabs clean and organized in any shop

KECO's NEW K-Tower is a powerful and versatile Pull Tower for correcting large damage with Glue Pull Repair. The lightweight aluminum construction allows easy location changes with mobility and simple setup in minutes. Angle adjusting post with increased height are features only found on the KECO K-Tower. The added accessories from KECO give this vacuum pull tower more flexibility, pulling strength, and adjustment for faster GPR repairs than any other system available.

• Post Angle Adjustment- rotation of 30 degrees left or right (60 degrees total) gives the K-Tower unmatched versatility. This adjustment reduces the need to turn off the air supply and reposition the base when pulls from multiple locations on the panel are required, creating efficiency
• Larger Aluminum Base - the increased base area creates the strongest pulling tower available. The design is lightweight and mobile for versatility and fast setup
• Finite Tension Adjustment - once fast or rough-out adjustments are made with the ratchet, the finite adjustment knobs allow incremental adjustments for finer GPR corrections in combination with knockdown work, only found with KECO
• Upper & Lower Saddles - additional versatility added with dual saddles, allowing use above or below damage
• Crown Holder - adjustable crown holder rod and foot allows for flexible setup to apply pressure to crown areas, support the tower against rigid features on the vehicle, or use on the ground to help stabilize for added pulling strength

*NEW Powerful Lateral Tension Technology from KECO!

The K-Power is KECO's most powerful lateral tension innovation. The K-Power applies force extremely low to the panel with controlled finesse to Port-a-Power strength. This allows for the cleanest lateral tension possible designed to maximize the output without the risk of creating collateral damage.

Multiple shoes give technicians flexibility and options for applying force to flat panels and body lines with perpendicular and in-line configurations.

Applying the K-Power force in between (2) LTT beams increases rough-out capabilities.

• Beam - 36" high strength, yet lightweight, extruded aluminum beam with precision machined slide surfaces
• Drive Rod - internal 1/2" threaded drive rod to minimize deflection at maximum power
• Durable Legs & Shoes - high-strength steel, precision machined legs and shoes provide strength and durability. Shoes designed to accommodate included centipede tabs, as well as adaptation to KECO LTT-Beams
• Hex Drive - standard 1/4" external drive accommodates power tools for fast setup and impact power during applied tension
• Includes 6 KECO Blue Centipede Tabs - (2) each 50mm x 54 mm (2 x 2 in) rigid centipedes, (2) each 50mm x 105 mm (2 x 4 in), and (2) each 50mm x 156 mm (2 x 6 in) rigid centipedes with lateral-pull hole

NEW from KECO!! The Kwik-Stick provides technicians with the powerful leverage necessary to pull large dents and collision damage from panels, rockers, doors, seams, body lines, and more. Combine the Kwik-Stick with high-strength Flex Collision glue and tabs to pull the deepest dents and collision damage from virtually all metals used in vehicle composition.

• Pivoting Vacuum Plate Fulcrum Foot - pivots over 210 degrees for versatility. The on/Off air valve makes it easy to move quickly. Locking pin to secure the plate for storage and protection of seal
• Locking Sliding Saddle - angles up to 60º and slides 52.5" allowing pulls on hard-to-reach places like rocker panels
• Comfort Grip Handle - creates ergonomic grip for leverage
• Includes 1 Chain - Adjustable pickup point and saddle for more adjustability during repair
• Includes 1 Locking Adapter - supports all KECO Centipede crease, dead center, and lateral tabs when used with a carabiner