KECO's NEW K-Tower is a powerful and versatile Pull Tower for correcting large damage with Glue Pull Repair. The lightweight aluminum construction allows easy location changes with mobility and simple setup in minutes. Angle adjusting post with increased height are features only found on the KECO K-Tower. The added accessories from KECO give this vacuum pull tower more flexibility, pulling strength, and adjustment for faster GPR repairs than any other system available.

• Post Angle Adjustment- rotation of 30 degrees left or right (60 degrees total) gives the K-Tower unmatched versatility. This adjustment reduces the need to turn off the air supply and reposition the base when pulls from multiple locations on the panel are required, creating efficiency
• Larger Aluminum Base - the increased base area creates the strongest pulling tower available. The design is lightweight and mobile for versatility and fast setup
• Finite Tension Adjustment - once fast or rough-out adjustments are made with the ratchet, the finite adjustment knobs allow incremental adjustments for finer GPR corrections in combination with knockdown work, only found with KECO
• Upper & Lower Saddles - additional versatility added with dual saddles, allowing use above or below damage
• Crown Holder - adjustable crown holder rod and foot allows for flexible setup to apply pressure to crown areas, support the tower against rigid features on the vehicle, or use on the ground to help stabilize for added pulling strength

*NEW Powerful Lateral Tension Technology from KECO!

The K-Power is KECO's most powerful lateral tension innovation. The K-Power applies force extremely low to the panel with controlled finesse to Port-a-Power strength. This allows for the cleanest lateral tension possible designed to maximize the output without the risk of creating collateral damage.

Multiple shoes give technicians flexibility and options for applying force to flat panels and body lines with perpendicular and in-line configurations.

Applying the K-Power force in between (2) LTT beams increases rough-out capabilities.

• Beam - 36" high strength, yet lightweight, extruded aluminum beam with precision machined slide surfaces
• Drive Rod - internal 1/2" threaded drive rod to minimize deflection at maximum power
• Durable Legs & Shoes - high-strength steel, precision machined legs and shoes provide strength and durability. Shoes designed to accommodate included centipede tabs, as well as adaptation to KECO LTT-Beams
• Hex Drive - standard 1/4" external drive accommodates power tools for fast setup and impact power during applied tension
• Includes 6 KECO Blue Centipede Tabs - (2) each 50mm x 54 mm (2 x 2 in) rigid centipedes, (2) each 50mm x 105 mm (2 x 4 in), and (2) each 50mm x 156 mm (2 x 6 in) rigid centipedes with lateral-pull hole

Designed for Shops and Technicians currently utilizing the L2E GPR System.

The GPR+ System adds on to your L2E to extend the repair system to correct damage further up the Repair Continuum. With the added tools the GPR+ System carries, technicians will be able to glue pull and push to paint with ease. This system is intended to complement glue pull repair and allow technicians to make more challenging repairs possible with the utmost efficiency.

Flat Finish Capability

The KECO GPR+ Repair System provides the tools required to achieve success with a flat finish repair.

• GPR+ Toolset - The GPR+ Tool cart carries tools and components allowing you to manipulate intermediate to finite damage into a flat, paintless, or push-to-paint finish. GPR intermediate and finish tabs are included for a complete set to address small to finite damage
• Small, Detail, and Finish Corrections - Various configurations of tools, tips, and accessories in the GPR+ System provide everything you need to work with damage from within the panel
• Storage & Organization - KECOs GPR+ Cart, TabPrints organizer, along with tool holders on every perimeter create a complete and solid platform, keeping tools organized and clean for any shop
• GPR+ Training - Take advantage of KECO’s Master GPR Instructors with our 3-day training class and curriculum designed with a hands-on approach in Oklahoma City. Contact us today or visit kecotabs.com and search ‘Training’

KECO's L2E is the most comprehensive glue pull repair system available to body shop technicians. This system includes the industry's best lifting tools, a powerful KECO shop light, and a GPR tool cart. This is the only option for those looking for a complete GPR solution to improve shop efficiency.

Finish your repairs fast with minimal, if any, body filler. Tools are easily stored and organized on the cart while the TabPrints organizer keeps your tabs arranged and ready to pull.

• Level 2E System Toolset - The complete shop system for technicians and shop owners wanting the complete GPR solution ideal for repairing damage throughout the repair continuum, using as little body filler as possible and preparing for paint quickly
• Rough-Out & Large Damage - K-Beam® and K-Beam® Jr. with added height legs provide double-action pulls and the K-Bar® executes leverage pulls that move tons of metal FAST
• Small & Detail Finish Corrections - Robo Lifter and Precision Pulling Base correct small and x-small damage with precise control when combined with Dead Center® finishing tabs
• Lighting - KECO Shop Light enhances the technician's ability to see damage on clear coat and various paint colors to enable to place tabs for pulls with accuracy and control
• Storage & Organization - KECOs GPR Cart, TabPrints™ organizer, along with the Z-Channel™ platform store glue gun, heat gun, thermometer, and glue to keep tools and tabs clean and organized in any shop

KECO's NEW K-Tower is a powerful and versatile Pull Tower for correcting large damage with Glue Pull Repair. The lightweight aluminum construction allows easy location changes with mobility and simple setup in minutes. Angle adjusting post with increased height are features only found on the KECO K-Tower. The added accessories from KECO give this vacuum pull tower more flexibility, pulling strength, and adjustment for faster GPR repairs than any other system available.

• Post Angle Adjustment- rotation of 30 degrees left or right (60 degrees total) gives the K-Tower unmatched versatility. This adjustment reduces the need to turn off the air supply and reposition the base when pulls from multiple locations on the panel are required, creating efficiency
• Larger Aluminum Base - the increased base area creates the strongest pulling tower available. The design is lightweight and mobile for versatility and fast setup
• Finite Tension Adjustment - once fast or rough-out adjustments are made with the ratchet, the finite adjustment knobs allow incremental adjustments for finer GPR corrections in combination with knockdown work, only found with KECO
• Upper & Lower Saddles - additional versatility added with dual saddles, allowing use above or below damage
• Crown Holder - adjustable crown holder rod and foot allows for flexible setup to apply pressure to crown areas, support the tower against rigid features on the vehicle, or use on the ground to help stabilize for added pulling strength

*NEW Powerful Lateral Tension Technology from KECO!

The K-Power is KECO's most powerful lateral tension innovation. The K-Power applies force extremely low to the panel with controlled finesse to Port-a-Power strength. This allows for the cleanest lateral tension possible designed to maximize the output without the risk of creating collateral damage.

Multiple shoes give technicians flexibility and options for applying force to flat panels and body lines with perpendicular and in-line configurations.

Applying the K-Power force in between (2) LTT beams increases rough-out capabilities.

• Beam - 36" high strength, yet lightweight, extruded aluminum beam with precision machined slide surfaces
• Drive Rod - internal 1/2" threaded drive rod to minimize deflection at maximum power
• Durable Legs & Shoes - high-strength steel, precision machined legs and shoes provide strength and durability. Shoes designed to accommodate included centipede tabs, as well as adaptation to KECO LTT-Beams
• Hex Drive - standard 1/4" external drive accommodates power tools for fast setup and impact power during applied tension
• Includes 6 KECO Blue Centipede Tabs - (2) each 50mm x 54 mm (2 x 2 in) rigid centipedes, (2) each 50mm x 105 mm (2 x 4 in), and (2) each 50mm x 156 mm (2 x 6 in) rigid centipedes with lateral-pull hole

Designed for Shops and Technicians currently utilizing the L2E GPR System.

The GPR+ System adds on to your L2E to extend the repair system to correct damage further up the Repair Continuum. With the added tools the GPR+ System carries, technicians will be able to glue pull and push to paint with ease. This system is intended to complement glue pull repair and allow technicians to make more challenging repairs possible with the utmost efficiency.

Flat Finish Capability

The KECO GPR+ Repair System provides the tools required to achieve success with a flat finish repair.

• GPR+ Toolset - The GPR+ Tool cart carries tools and components allowing you to manipulate intermediate to finite damage into a flat, paintless, or push-to-paint finish. GPR intermediate and finish tabs are included for a complete set to address small to finite damage
• Small, Detail, and Finish Corrections - Various configurations of tools, tips, and accessories in the GPR+ System provide everything you need to work with damage from within the panel
• Storage & Organization - KECOs GPR+ Cart, TabPrints organizer, along with tool holders on every perimeter create a complete and solid platform, keeping tools organized and clean for any shop
• GPR+ Training - Take advantage of KECO’s Master GPR Instructors with our 3-day training class and curriculum designed with a hands-on approach in Oklahoma City. Contact us today or visit kecotabs.com and search ‘Training’