Exhibitors & products 2024

RAPID GROUP GmbH

Waste oil evacuation system modell AOS 1005/3

Waste oil evacuation system modell AOS 1005/3

RAPID GROUP GmbH

Supplier profile All products

Contact supplier

Description

These containers are suitable for waste oil collection (GF AIII VbF) from machines and vehicles. Emptying by a principle of vakuum. Volume 80 ltr. Suction speed: Approx. 3 ltr./min, at a oil temperature of 80 °C. Emptying: with compressed air. Multi purpose unit for suction and collection of waste oil:

Vertically adjustable rubber grip handle
4 rollers, 2 of them steering rollers
Emptying by compressed air
Incl. suction probe type SO-kit
collecting waste oil below carlifts
Incl. funnel Ø 600 mm
Vertically adjustable 1200 - 1600 mm
Dim. approx. 600 x 600 x 1200 mm (LxWxH), 35 kg

More from us

Our website

More products by RAPID GROUP GmbH

Collecting pan modell RZW10

Collecting pan with grid and without feet, galvanized. For all mobile oil- and grease dispenser machines in idle state, in order to comply with regulations according to Water Resources Act (WHG).

Ideal for the storage of ÖAM models in idle period
capacity of pan 270 ltr
Load max. 2t wheel pressure on load area 200 x 200 mm
Dim. approx. 2840 x 1340 x 82 mm (L x W x H)

Automatic hose reel model 3.12.10-Flex/SCS

Autom. hose reel cast aluminum drum with swivelling outlet stirrup
Multiple detent per round
lncl. special flex hose DN 10 and stopper
pressure max. 15 bar / 20°C
Incl. Rapid SCS - Controlled reeling . SCS is a registered trade mark with an intelligent safety system for spring operated automatic hose reels. The system limits the retraction speed to an unhazardous extent and prevents the hose to roll up accidentally uncontrolled and so, avoids damages and injuries.

Impact wrench ¾” modell UT8310

Extremly short body for working tight Spots
Durable and powerful TWIN-HAMMER impact mechanism
One band operated in orderto control running direction and torque.
3 stages in forward and reverse
Vibration reduced cushion grip, airexhaustthrough handle
Max.Torque: 1.485 Nm / Nut busting torque: 2.215 Nm

Speed (min-1)
5.500

Square Drive (Zoll)
3/4“

Working Torque (Nm)
200 - 900

Max. Torque (Nm)
1.485

Length (mm)
159

Weight (kg)
2,9

Air Consumption (l/s)
2,0

Air Inlet (Zoll)
BSP 1/4"

Vibration (m/s2)
4,2

Sound Pressure (dB (A))
83,0

Oil dispensing unit model GTK 60/6-P

This special dispenser set is designed to optimise your oil supply. It is ready to use and can be employed nearly everywhere. The carrying unit can be fitted with electrical or pneumatic pumps.
1 to 6 different kind of oils can be dispensed via oil bar. Drain pan confirming VAWS is included.

Specification of Model GTK 60/6-P:

1 x carrier unit type W 11 T for 6 x 60 ltr. barrels and
6 x pneum. pumps type OP 90D30/1, incl. suction
2 x oil bar with 6 spigots totally
1 x drain pan type W 11
Dim. 1800 x 800 x 1755 mm ( L xW x H)

Collecting pan modell RZW10

Collecting pan with grid and without feet, galvanized. For all mobile oil- and grease dispenser machines in idle state, in order to comply with regulations according to Water Resources Act (WHG).

Ideal for the storage of ÖAM models in idle period
capacity of pan 270 ltr
Load max. 2t wheel pressure on load area 200 x 200 mm
Dim. approx. 2840 x 1340 x 82 mm (L x W x H)

Automatic hose reel model 3.12.10-Flex/SCS

Autom. hose reel cast aluminum drum with swivelling outlet stirrup
Multiple detent per round
lncl. special flex hose DN 10 and stopper
pressure max. 15 bar / 20°C
Incl. Rapid SCS - Controlled reeling . SCS is a registered trade mark with an intelligent safety system for spring operated automatic hose reels. The system limits the retraction speed to an unhazardous extent and prevents the hose to roll up accidentally uncontrolled and so, avoids damages and injuries.

Impact wrench ¾” modell UT8310

Extremly short body for working tight Spots
Durable and powerful TWIN-HAMMER impact mechanism
One band operated in orderto control running direction and torque.
3 stages in forward and reverse
Vibration reduced cushion grip, airexhaustthrough handle
Max.Torque: 1.485 Nm / Nut busting torque: 2.215 Nm

Oil dispensing unit model GTK 60/6-P

Specification of Model GTK 60/6-P:

1 x carrier unit type W 11 T for 6 x 60 ltr. barrels and
6 x pneum. pumps type OP 90D30/1, incl. suction
2 x oil bar with 6 spigots totally
1 x drain pan type W 11
Dim. 1800 x 800 x 1755 mm ( L xW x H)

Collecting pan modell RZW10

Collecting pan with grid and without feet, galvanized. For all mobile oil- and grease dispenser machines in idle state, in order to comply with regulations according to Water Resources Act (WHG).

Ideal for the storage of ÖAM models in idle period
capacity of pan 270 ltr
Load max. 2t wheel pressure on load area 200 x 200 mm
Dim. approx. 2840 x 1340 x 82 mm (L x W x H)

Automatic hose reel model 3.12.10-Flex/SCS

Autom. hose reel cast aluminum drum with swivelling outlet stirrup
Multiple detent per round
lncl. special flex hose DN 10 and stopper
pressure max. 15 bar / 20°C
Incl. Rapid SCS - Controlled reeling . SCS is a registered trade mark with an intelligent safety system for spring operated automatic hose reels. The system limits the retraction speed to an unhazardous extent and prevents the hose to roll up accidentally uncontrolled and so, avoids damages and injuries.