RVS TECHNOLOGY® for 4-stroke gasoline (petrol) engines G2-G8

Improve the economy and durability of your vehicle while you make it environmentally more friendly. RVS TECHNOLOGY® is certified to protect surfaces abd mechanisms from wear. As the friction reduces, the energy loss is reduced. This leads to reduced emissions and improves engine operation. The engine becomes long-lasting and economically effective.

The treatment is easy to carry out by yourself:

• Let the engine idle or operate for at least 5 minutes unless it is already warm.
• Mix the product contents of the package. Shake well.
• Shut the engine down, open the hood (bonnet), and and pour one half of the mixture into the engine via the oil filling hole.
• Let the engine idle for about 15 minutes. Stop the engine and pour the rest of the mixture into the oil filling hole.
• Start the engine and drive for at least 30 to 40 minutes.

You guarantee the best possible result by renewing the treatment about 400 km (250 miles) after the first treatment. It is recommended to carry out the second treatment after oil change. A second treatment is recommended for vehicles with a mileage of over 40,000 km (25,000 miles).

RVS TECHNOLOGY® for four-stroke diesel engines

Improve the economy and durability of your vehicle while you make it environmentally more friendly. RVS TECHNOLOGY® protects surfaces and equipment from wear. As the friction reduces, the energy loss is reduced. This leads to reduced emissions and improves engine operation. The engine becomes long-lasting and economically effective.

The treatment is easy to carry out by yourself:

• Let the engine idle or operate for at least 5 minutes unless it is already warm.
• Mix the product contents of the package. Shake well.
• Shut the engine down, open the hood (bonnet), and and pour one half of the mixture into the engine via the oil filling hole.
• Let the engine idle for about 15 minutes. Stop the engine and pour the rest of the mixture into the oil filling hole.
• Start the engine and drive for at least 30 to 40 minutes.

You ensure the best possible result by renewing the treatment about 400 km (250 miles) after the first treatment. It is recommended to carry out the second treatment after oil change. The second treatment is recommended for vehicles with a mileage of over 40,000 kms (25,000 miles).

RVS TECHNOLOGY® for hydraulic power steering

Improve the usability of your vehicle very easily. RVS TECHNOLOGY® protects surfaces and equipment from wear. If the steering feels stiff or makes noise, you can improve its operation yourself.

Introduce the RVS Power Steering Protection & Restoration product into the oil reservoir of your power steering system and turn the steering wheel from one extreme position to the other. After the treatment, the steering becomes light, accurate, and noiseless.

The product suits power steering systems with oil capacity up to 2 litres (2 qt.). Attention! Not suitable for electric power steering.

Note that the product affects only the power steering unit. If the steering has other problems, the product has no effect on them. Using the product is not badly spent money in any case as the pump becomes more durable after the RVS treatment.

RVS TECHNOLOGY® for fuel injection systems

Improve the economy and durability of your vehicle while you make it environmentally more friendly. RVS TECHNOLOGY® protects surfaces and equipment from wear. By treating your fuel system, you clean, restore, and protect the fuel pump and injectors of your vehicle. It improves the combustion process and prevents fuel pump failures.

The treatment is easy to carry out by yourself:

• It is recommended to start the RVS Technology® Injection System Protection & Restoration procedures when the fuel tank is almost empty (the amount of fuel is sufficient for 45-to-60-minute driving).
• Shake the bottle well (20–30 sec.) until the mixture is homogenous.
• Pour the contents of the bottle into the fuel tank.
• Let the engine operate – preferably in driving conditions – until the fuel tank is almost empty. Avoid stopping the engine during this time. Fill up the fuel tank and continue using the vehicle as usual.
• The treatment is complete after approximately 300 to 500 km (180 to 300 miles) of driving.

You guarantee the best possible result if you treat the engine with RVS Technology® Engine Protection & Restoration products first.

RVS TECHNOLOGY® for 4-stroke gasoline (petrol) engines G2-G8

Improve the economy and durability of your vehicle while you make it environmentally more friendly. RVS TECHNOLOGY® is certified to protect surfaces abd mechanisms from wear. As the friction reduces, the energy loss is reduced. This leads to reduced emissions and improves engine operation. The engine becomes long-lasting and economically effective.

The treatment is easy to carry out by yourself:

• Let the engine idle or operate for at least 5 minutes unless it is already warm.
• Mix the product contents of the package. Shake well.
• Shut the engine down, open the hood (bonnet), and and pour one half of the mixture into the engine via the oil filling hole.
• Let the engine idle for about 15 minutes. Stop the engine and pour the rest of the mixture into the oil filling hole.
• Start the engine and drive for at least 30 to 40 minutes.

You guarantee the best possible result by renewing the treatment about 400 km (250 miles) after the first treatment. It is recommended to carry out the second treatment after oil change. A second treatment is recommended for vehicles with a mileage of over 40,000 km (25,000 miles).

RVS TECHNOLOGY® for four-stroke diesel engines

Improve the economy and durability of your vehicle while you make it environmentally more friendly. RVS TECHNOLOGY® protects surfaces and equipment from wear. As the friction reduces, the energy loss is reduced. This leads to reduced emissions and improves engine operation. The engine becomes long-lasting and economically effective.

The treatment is easy to carry out by yourself:

• Let the engine idle or operate for at least 5 minutes unless it is already warm.
• Mix the product contents of the package. Shake well.
• Shut the engine down, open the hood (bonnet), and and pour one half of the mixture into the engine via the oil filling hole.
• Let the engine idle for about 15 minutes. Stop the engine and pour the rest of the mixture into the oil filling hole.
• Start the engine and drive for at least 30 to 40 minutes.

You ensure the best possible result by renewing the treatment about 400 km (250 miles) after the first treatment. It is recommended to carry out the second treatment after oil change. The second treatment is recommended for vehicles with a mileage of over 40,000 kms (25,000 miles).

RVS TECHNOLOGY® for hydraulic power steering

Improve the usability of your vehicle very easily. RVS TECHNOLOGY® protects surfaces and equipment from wear. If the steering feels stiff or makes noise, you can improve its operation yourself.

Introduce the RVS Power Steering Protection & Restoration product into the oil reservoir of your power steering system and turn the steering wheel from one extreme position to the other. After the treatment, the steering becomes light, accurate, and noiseless.

The product suits power steering systems with oil capacity up to 2 litres (2 qt.). Attention! Not suitable for electric power steering.

Note that the product affects only the power steering unit. If the steering has other problems, the product has no effect on them. Using the product is not badly spent money in any case as the pump becomes more durable after the RVS treatment.