Codeman PLUS+ Premium, Exact and fast CR injector TESTING & CODING and pump TEST

Performing complete and accurate test of multi-brand CR injectors and Pumps

4 Cylinder CR injector testing;

Bosch, Delphi, Denso, Siemens VDO, CAT, Scania

4 injector coding at the same time;

Bosch Selenoid IMA

Bosch Piezo ISA

Delphi C2i/C3i

Siemens IIC Coding

Denso QR Coding

Pump testing

Bosch CP1-CP3-CP4

Delphi

Denso HP3

Siemens

Codeman Plus+ has reduced setup and test times as well as user friendly operation menu.
Sensitive flowmeters has capable to test injectors under 10 minutes in manual mode (4 flowmeters for 4 cylinders)
Operation via 15,6″ touch screen monitor
Full automatic mode testing provides certain and fast results.
Ergonomic design , wide range injector fixtured area ,
Easy setup with 90 degree fittings and 2500 bar Flexi pipes.

With loaded CR pump test plans you can test;

• Efficiency of flow

• DRV or Mprobe amperes and reaction

• Internal pressure

• Maximum pressure

• Start pressure and plunger status

There are 7 groups and over 3800 different test values in database, so each group offers perfect coding and testing for injectors.
Software updates and test plans can be loaded with remote desktop free of charge.
In coding section there are ready targets for most injectors and coding section can be used freely , no any charge for every injector code.

UNIT PC E Premium, Exact and fast EUI and EUP TESTING

Performing complete and accurate test of multi-brand injectors and Pumps

New CAMBOX designed with 5 section original cam;

• VW

• Volvo-Iveco-Scania,

• MB Axor,Atego

• MB Actross,DAF, Mack, Renault

• Cummins

Test plan is divided to 5 groups.

• Bosch PKW (VW group)

• Bosch LKW (MB,DAF,IVECO.SCANIA…)

• Delphi Volvo group (FH 12, 2 pin,4 pin)

• Cummins & CAT & Detroit USA group

• Siemens piezo

Electronics are supported with double coil for HPI & Volvo 4 pins and also piezo cards.

UNIT PC E has reduced setup and test times as well as user friendly operation menu.

Controls all types and makes of unit injectors & pumps.
Actuator valve measurement via BIP sensor and delay time measurements with follow oscillascope.

Easy and oil free change of cam with sliding plate.
Perfect angle reseting for each cam shafts.

Dynamic electronic mass measurement.
You can check the unit all EUP EUI injectors like Bosch, Delphi,Cummins, Caterpillar, Detroit. Scania Cummins HPI & Volvo Euro & are optional.
It contains test plans of injector and pump types of many brands in the market.

Software updates and test plans can be loaded with remote desktop free of charge.
10 pieces adaptors is given free by the bench.

Codeman Express, Premium, Exact and fast CR injector TESTING and CODING
Performing complete and accurate test of multi-brand CR injectors

CR injector testing;
Bosch, Delphi, Denso, Siemens VDO, CAT, Scania

Injector coding;

• Bosch Selenoid IMA

• Bosch Piezo ISA

• Delphi C2i/C3i

• Siemens IIC Coding

• Denso QR Coding

Codeman EXPRESS has reduced setup and test times as well as user friendly operation menu.
Sensitive flowmeters has capable to test injectors under 8 minutes in manual mode
Operation via 10″ touch screen monitor
Full automatic and semi-automatic testing provides certain and fast results.
Ergonomic design and airmatic guard cover.
Easy setup with 90 degree fittings and 2500 bar Flexi pipe.
There are 7 groups and over 3800 different test values in database, so each group offers perfect coding and testing for injectors.
Software updates and test plans can be loaded with remote desktop free of charge.
In coding section there are ready targets for most injectors and coding section can be used freely , no any charge for every injector code.

Particulate Filter Cleaning Machine

This machine is designed for passenger cars, trucks, buses, construction equipment and agricultural equipment’s particulate filters and catalysts.

It is a great solution for car services and remanifactoring workshops.

Cleans all Car and Light Commercial;

• DPF: Diesel Particulate Filter

• GPF: Gasoline Particulate Filter

• SCR: Selective Catalyst Reduction

• CAT: Catalyst

• DOC: Diesel Oxidation Catalyst

Particulate Filter Cleaning Machine

PFC-01 keeps the cleaning quality at the highest level with its special programs.
Machine has capable to clean the Paticulate filters under 20 minutes in auto mode with circulation system(Express mode)

Operation via 10,6″ touch screen monitor.
Check up test before cleaning and final check after cleaning and drying (as mbar )

Save and print out facilities
Wide range stainless steel paticule filter cleaning area and easy fittings and fixtures

Automatic tank water filling with tank level control sensors and 2 filterzation system.
200 Liter Tank with double heater resistance.

It’s made from stainless steel.

Digital input air pressure measuring and warning system integrated drying system with profesional blowers.
Biodegradable good quality chemicals

Clean and Test Progress is;

• Checkup Pressure test

• Pre-Washing

• Detergent Washing

• Rinsing

• Spitting and Drying

• Final Checkup test

**Heavy commercial vehicles aparats are optional. Pfc-01 model is for cars and light trucks, PFC02 is for cars & light trucks & trucks.

***This machine needs a air compresor.

Codeman PLUS+ Premium, Exact and fast CR injector TESTING & CODING and pump TEST

Performing complete and accurate test of multi-brand CR injectors and Pumps

4 Cylinder CR injector testing;

Bosch, Delphi, Denso, Siemens VDO, CAT, Scania

4 injector coding at the same time;

Bosch Selenoid IMA

Bosch Piezo ISA

Delphi C2i/C3i

Siemens IIC Coding

Denso QR Coding

Pump testing

Bosch CP1-CP3-CP4

Delphi

Denso HP3

Siemens

Codeman Plus+ has reduced setup and test times as well as user friendly operation menu.
Sensitive flowmeters has capable to test injectors under 10 minutes in manual mode (4 flowmeters for 4 cylinders)
Operation via 15,6″ touch screen monitor
Full automatic mode testing provides certain and fast results.
Ergonomic design , wide range injector fixtured area ,
Easy setup with 90 degree fittings and 2500 bar Flexi pipes.

With loaded CR pump test plans you can test;

• Efficiency of flow

• DRV or Mprobe amperes and reaction

• Internal pressure

• Maximum pressure

• Start pressure and plunger status

There are 7 groups and over 3800 different test values in database, so each group offers perfect coding and testing for injectors.
Software updates and test plans can be loaded with remote desktop free of charge.
In coding section there are ready targets for most injectors and coding section can be used freely , no any charge for every injector code.

UNIT PC E Premium, Exact and fast EUI and EUP TESTING

Performing complete and accurate test of multi-brand injectors and Pumps

New CAMBOX designed with 5 section original cam;

• VW

• Volvo-Iveco-Scania,

• MB Axor,Atego

• MB Actross,DAF, Mack, Renault

• Cummins

Test plan is divided to 5 groups.

• Bosch PKW (VW group)

• Bosch LKW (MB,DAF,IVECO.SCANIA…)

• Delphi Volvo group (FH 12, 2 pin,4 pin)

• Cummins & CAT & Detroit USA group

• Siemens piezo

Electronics are supported with double coil for HPI & Volvo 4 pins and also piezo cards.

UNIT PC E has reduced setup and test times as well as user friendly operation menu.

Controls all types and makes of unit injectors & pumps.
Actuator valve measurement via BIP sensor and delay time measurements with follow oscillascope.

Easy and oil free change of cam with sliding plate.
Perfect angle reseting for each cam shafts.

Dynamic electronic mass measurement.
You can check the unit all EUP EUI injectors like Bosch, Delphi,Cummins, Caterpillar, Detroit. Scania Cummins HPI & Volvo Euro & are optional.
It contains test plans of injector and pump types of many brands in the market.

Software updates and test plans can be loaded with remote desktop free of charge.
10 pieces adaptors is given free by the bench.

Codeman Express, Premium, Exact and fast CR injector TESTING and CODING
Performing complete and accurate test of multi-brand CR injectors

CR injector testing;
Bosch, Delphi, Denso, Siemens VDO, CAT, Scania

Injector coding;

• Bosch Selenoid IMA

• Bosch Piezo ISA

• Delphi C2i/C3i

• Siemens IIC Coding

• Denso QR Coding

Codeman EXPRESS has reduced setup and test times as well as user friendly operation menu.
Sensitive flowmeters has capable to test injectors under 8 minutes in manual mode
Operation via 10″ touch screen monitor
Full automatic and semi-automatic testing provides certain and fast results.
Ergonomic design and airmatic guard cover.
Easy setup with 90 degree fittings and 2500 bar Flexi pipe.
There are 7 groups and over 3800 different test values in database, so each group offers perfect coding and testing for injectors.
Software updates and test plans can be loaded with remote desktop free of charge.
In coding section there are ready targets for most injectors and coding section can be used freely , no any charge for every injector code.