This brand new and modern technology offers the car body builder a small and light welding gun for fixing plastic car parts.

As this tool uses nitrogen instead of air it prevents disagreeable fumes and a better aging performance of the welded seam. For that it is possible to join broken off parts or to redesign missing parts.

Our top level version offers a particular economic efficiency for using an integrated nitrogen generator, which only has to be connected to the compressed air supply of the workshop.

Most of the different Cebotech Nitrogen Plastic Welders come with our Tack Welder plastic repair system integrated that enables to keep broken parts on the right place.

The Cebotech CEBOLINER car bodywork stations are available in different variants equipped for the respective applications with all the necessary accessories.

Approvals by Ford Europe, Nissan Europe - more in preparation

Dent pulling station CEBOPULL JUNIOR

Suitable for car body work on steel panels.

Dent pulling station CEBOLINER T-SPOT

Fully equipped for car body work on steel.

In addition equipped with the toolbox "GLUE" minor dings and dents without painting can be eliminated.

For more pulling and pressing power there is the ELECTROPOWER basic set

Dent pulling station CEBOLINER TOPLINE

In addition to the CEBOLINER T-SPOT this dent pulling station is also fully equipped for car body work on aluminum..

Dent station CEBOPULL JUNIOR

Scope of delivery:

complete trolley

Spot 4889 with ground cable and multifuntional gun

Range of accessories for spotter

Electrode for long hole pins

Long hole pins straight & turned (per 50 pcs.)

1, 1 kg impact sliding hammer

Hand pull-out system with various types of tools

Pull-out bar with revolving lever (0,9m)

earthclamp screw

6-hook clamp for pull-out bar

Dent station CEBOLINER T-SPOT

Scope of delivery:

complete big trolley with hooks

Multifunctionspotter T-SPOT 120 with earth clamp screw und multifunction gun for steel

Range of accessories for spotters

Electrode for long hole pins

Long hole pins straight and turned (per 150 pcs.)

Bit cutter for reshaping used pins

Sliding puller set with SUPER ELECTRODE

FAST PULLER hand pulling system with 7 different feet

Pull-out bar with revolving lever (0,9 m)

Additional long pull-out bars (1,2 m + 1,6 m) with short and long feet

6-hook clamp for pull-out bar

Toolbox "Glue"

ELECTROPOWER basic set

In addition to the version T-SPOT, the version CEBOLINER TOPLINE includes the following accessories for car body work on aluminum:

TSW 1500 CAR ALUSPOTTER

Pull-out bar (0.9 m) with pulling system with 3 screws

Aluminum processing set (gasburner, thermal paste and ice shock spray)

Aluminum alloy welding bolts (AlSi12 + AlMg3 per 100 pieces)

Aluminum hammer set (7 pcs.)

MIG welder and MIG brazing machine with programs for pulsed arc or short arc for the most diverse, weldable materials of modern car bodies such as highstrenth-steel, galvanized sheet metal or aluminum alloys. Depending on the thickness, material and torch length this double torch welding system can be equipped with the best solution for the task. There is a 4 m handy push-pull torch for the optimum welding of aluminum. To update the software there is an interface. The operation is very simple and easy to use. The only necessary setting is the sheet metal thickness. Welders of the Synstar family passed  welding tests of well known automobile manufacturers such as Volkswagen (SLV Duisburg 2018) due to their excellent welding properties.

The inductor energy is a revolutionary dismantling system, which generates heat in metal parts by induction.

The inductor energy removes bonded elements of the car body and is suitable as well for heating rusty bolts and nuts.

The inductor energy can used in flammable environments around fuel - and hydraulic hoses

With the accessories developed specially for the inductor energy this system offers the following advantages and possibilities:

Reduces labour costs

Enables the reuse of dismantled components

Heats rusted bolts and nuts

Simplifies the bearing assembly and disassembly

Removes everything that is glued with steel, as for example:

• glued glass
• glued components
• stickers, adhesive strips, films and trims
• identification plates
• underbody protection and structure coatings

Facilities of the Inductor Energy

Acoustic and visual power indicator

Ease of use

Clear instructions

Ergonomically shaped tools made of high quality, impact resistant plastic

Universal design and rounded edges allow the machining of various shapes and forms

Included with Inductor Energy:

• Heat pad
• Suitable for dismantling of bonded parts with metal layers
• Made of heat-resistant material
• With adjustable handle
• Flat, flexible surface for the targeted heating of various outlines on an area of 12 x 12 cm

Glass Releaser

• Especially suitable for removing bonded car glass, but also other bonded elements
• Ergonomically shaped handle
• For use on the outside or inside of a car glass

Heat concentrator

• Suitable for unloosing stuck bolts and nuts
• Excellent alternative to a gas burner

Help wedges (3 units)

• For removing auto glass
• To remove parts

Trolley

• Specially designed for the transport of the inductor energy
• With two compartments for the storage of tools

Technical data:

Power                        

2200W

Maximum heat output

2000 W

Voltage                      

230 V / 50 Hz

Dimensions (wxlxh)    

30.5x45.7x28.0 cm

Net weight                 

24 kg

This brand new and modern technology offers the car body builder a small and light welding gun for fixing plastic car parts.

As this tool uses nitrogen instead of air it prevents disagreeable fumes and a better aging performance of the welded seam. For that it is possible to join broken off parts or to redesign missing parts.

Our top level version offers a particular economic efficiency for using an integrated nitrogen generator, which only has to be connected to the compressed air supply of the workshop.

Most of the different Cebotech Nitrogen Plastic Welders come with our Tack Welder plastic repair system integrated that enables to keep broken parts on the right place.

The Cebotech CEBOLINER car bodywork stations are available in different variants equipped for the respective applications with all the necessary accessories.

Approvals by Ford Europe, Nissan Europe - more in preparation

Dent pulling station CEBOPULL JUNIOR

Suitable for car body work on steel panels.

Dent pulling station CEBOLINER T-SPOT

Fully equipped for car body work on steel.

In addition equipped with the toolbox "GLUE" minor dings and dents without painting can be eliminated.

For more pulling and pressing power there is the ELECTROPOWER basic set

Dent pulling station CEBOLINER TOPLINE

In addition to the CEBOLINER T-SPOT this dent pulling station is also fully equipped for car body work on aluminum..

Dent station CEBOPULL JUNIOR

Scope of delivery:

complete trolley

Spot 4889 with ground cable and multifuntional gun

Range of accessories for spotter

Electrode for long hole pins

Long hole pins straight & turned (per 50 pcs.)

1, 1 kg impact sliding hammer

Hand pull-out system with various types of tools

Pull-out bar with revolving lever (0,9m)

earthclamp screw

6-hook clamp for pull-out bar

Dent station CEBOLINER T-SPOT

Scope of delivery:

complete big trolley with hooks

Multifunctionspotter T-SPOT 120 with earth clamp screw und multifunction gun for steel

Range of accessories for spotters

Electrode for long hole pins

Long hole pins straight and turned (per 150 pcs.)

Bit cutter for reshaping used pins

Sliding puller set with SUPER ELECTRODE

FAST PULLER hand pulling system with 7 different feet

Pull-out bar with revolving lever (0,9 m)

Additional long pull-out bars (1,2 m + 1,6 m) with short and long feet

6-hook clamp for pull-out bar

Toolbox "Glue"

ELECTROPOWER basic set

In addition to the version T-SPOT, the version CEBOLINER TOPLINE includes the following accessories for car body work on aluminum:

TSW 1500 CAR ALUSPOTTER

Pull-out bar (0.9 m) with pulling system with 3 screws

Aluminum processing set (gasburner, thermal paste and ice shock spray)

Aluminum alloy welding bolts (AlSi12 + AlMg3 per 100 pieces)

Aluminum hammer set (7 pcs.)

MIG welder and MIG brazing machine with programs for pulsed arc or short arc for the most diverse, weldable materials of modern car bodies such as highstrenth-steel, galvanized sheet metal or aluminum alloys. Depending on the thickness, material and torch length this double torch welding system can be equipped with the best solution for the task. There is a 4 m handy push-pull torch for the optimum welding of aluminum. To update the software there is an interface. The operation is very simple and easy to use. The only necessary setting is the sheet metal thickness. Welders of the Synstar family passed  welding tests of well known automobile manufacturers such as Volkswagen (SLV Duisburg 2018) due to their excellent welding properties.