Moment Alpha Too-one®, is an electronic torque and angle wrench, which allows with a single tool to tighten and measure the angle and torque of your clamps over a range of 0.5 to 1000 Nm.
Moment Alpha Too-One® adapts to your operating environment, whether for your production lines or your quality controls, thanks to different tightening strategies, and its suitable controllers (cabinet/ tablet).

• Screwdriver and torque wrench mode: Up to 1000 Nm
• Torque and angle measurement according to screwdriving strategy
• Traceability in the form of curves or direct results
• Results combinable to your entire tool park
• Non-influence of the torque according to the grip

Moment Alpha ARGOS® wrench is an electronic torque wrench allowing to thighten and measure angle and torque of your clamping range from 0.5 N.m to 1000 N.m with a single tool.

This communicative and factorycompatible tool 4.0, offers you a great freedomof use, notably thanks to its wifi connectivity 2.4 or 5 GHz.

- Screwdriver and wrench mode: up to 1000 N.m
- Torque and angle measurement according to a tightening strategy
- Traceability in the form of curves or direct results
- 1.4" OLED display associate to a joystick
- Baragraph display 8 leds and 3 colors to indicate the tightening status
- uninfluence of the torque according on the grip

Amédée® is a tool to control the condition of the cylinder tops of Gasoline, Diesel, Gas engines.
It makes it possible to carry out their predictive maintenance, diagnosis and expertise.
Measures compression on Petrol and Diesel engines and Controls tightness by injection of controlled compressed air into the compression chamber.
• Timeliness of implementation
• Pressure measurement throughout the cycle (f=10 Hz)
• Checking the tightness of the cylinder expressed in Amédée® index (0 to 100)
• Aid in locating the origin of the leak using a stethoscope
• Saving the obtained values, storage and transfer by USB to PC
• Possibility of operating and printing the results (Windows XP compatible software, Windows 7 provided)
• Amédée® Check kit supplied: control gauge + test nozzle
• Options: Cylinder connectors, 80 bar sensor
• Various fields of application: Transport (car, truck, bus, boat, rail), Agriculture, Industry, Construction, Others...
• Compression value display: 0 - 50 bar
• Amédée® index water resistance display from 0 to 100
• Engine to Starter Speed
• Indication of number of pressure-bearing assemblies

The Audiobox® is a sonometer it listens to, locates and logs airborne and solid-borne noises in the passenger compartment, the engine compartment, on the transmission and in connections with the ground. The Audiobox® sonometer operates using vibro-acoustic technology.

Using the sonometer is very simple: you just fix the clamps with an accelerometer and microphones (four are available) after first connecting them to the Audiobox®, on the areas to test. The Audiobox® precisely analyses the noises and visually reports the results on the screen. The left-hand side of the screen shows airborne noise, while the right-hand side reports solid-borne noise. The operator listens with a headset connected to the Audiobox® and can adjust the sound volume and record the sequence to analyse it.

The collected data can then be processed with a display of the curves for accurate diagnosis. The Audiobox® sonometer from One-Too can be used for listening to noise from the air-conditioning compressor, ratchets, belts, speakers, shock-absorber cups, discs, pads, bearings, housings, cavitation noises, rattling etc.

Moment Alpha Too-one®, is an electronic torque and angle wrench, which allows with a single tool to tighten and measure the angle and torque of your clamps over a range of 0.5 to 1000 Nm.
Moment Alpha Too-One® adapts to your operating environment, whether for your production lines or your quality controls, thanks to different tightening strategies, and its suitable controllers (cabinet/ tablet).

• Screwdriver and torque wrench mode: Up to 1000 Nm
• Torque and angle measurement according to screwdriving strategy
• Traceability in the form of curves or direct results
• Results combinable to your entire tool park
• Non-influence of the torque according to the grip

Moment Alpha ARGOS® wrench is an electronic torque wrench allowing to thighten and measure angle and torque of your clamping range from 0.5 N.m to 1000 N.m with a single tool.

This communicative and factorycompatible tool 4.0, offers you a great freedomof use, notably thanks to its wifi connectivity 2.4 or 5 GHz.

- Screwdriver and wrench mode: up to 1000 N.m
- Torque and angle measurement according to a tightening strategy
- Traceability in the form of curves or direct results
- 1.4" OLED display associate to a joystick
- Baragraph display 8 leds and 3 colors to indicate the tightening status
- uninfluence of the torque according on the grip

Amédée® is a tool to control the condition of the cylinder tops of Gasoline, Diesel, Gas engines.
It makes it possible to carry out their predictive maintenance, diagnosis and expertise.
Measures compression on Petrol and Diesel engines and Controls tightness by injection of controlled compressed air into the compression chamber.
• Timeliness of implementation
• Pressure measurement throughout the cycle (f=10 Hz)
• Checking the tightness of the cylinder expressed in Amédée® index (0 to 100)
• Aid in locating the origin of the leak using a stethoscope
• Saving the obtained values, storage and transfer by USB to PC
• Possibility of operating and printing the results (Windows XP compatible software, Windows 7 provided)
• Amédée® Check kit supplied: control gauge + test nozzle
• Options: Cylinder connectors, 80 bar sensor
• Various fields of application: Transport (car, truck, bus, boat, rail), Agriculture, Industry, Construction, Others...
• Compression value display: 0 - 50 bar
• Amédée® index water resistance display from 0 to 100
• Engine to Starter Speed
• Indication of number of pressure-bearing assemblies