E&E Turbo can be able to supply an extensive range of turbine wheels / shaft & wheels, covering 20 ~ 270 mm diameter with more than 2, 500 different models.

l All E&E Turbo turbine wheels are manufactured using Inconel 713c up to 850° degree with 75% nickel content (Upgraded material M2004 for high end users).So E&E Turbo can make high quality inconel shaft turbine wheel.

l E&E Shaft wheel with plate closed, single or twin piston rings, reverse, cutback and performance ball bearing can be 100% made in house.

l E&E Turbo use Electron Beam Welding and Friction Welding. After electron welding, the welded area is totally inspected by Ultra Sonic Testing to ensure quality and reliability.

l Full-Scale dimensional inspection is conducted after automatic production. Including turbine blades, inducer sizes, exducer sizes, tip height, contour, turbine wheel length etc.

l Automatic-Production Lines allow E&E very proud of being the pioneer in the aftermarket. Now, E&E Turbo has the capability of producing 100,000 pcs per month.

l To improve accuracy, E&E Turbo use Schenck Automatic Balancing machine with air bearings to minimize errors, better than traditional balancing procedures.

E&E Turbo offer high quality wide range vacuum and electronic actuators. Inside diaphragms are made of technical reinforced silicone, pursuing greater endurance. Outside corrosion proof covers are made of special aluminum which can withstand duty stress, high temperature changes during prolonged periods of time.

E&E Turbo can supply more than 1,500 different kinds of quality actuators and various actuator parts (bracket, rod, membrane, silicon hose, electric actuator motor, worm gear, gear box etc ).

E&E Turbo selects aluminum alloy with higher strength-to-weight ratio, higher tensile strength and good corrosion resistance after testing under high temperature. Now, we have more than 2000 kinds of billet compressor wheels available for

• Trial & Small order for performance / racing design;
• Middle & Large Volume production for OE design in the automotive aftermarket;
• Customized order (Interchangeable with casting compressor wheels)
• Anodized billet compressor wheels with a shinny color in surface (Black, Yellow, Red, Blue, etc)

Billet Compressor Wheels we supply are balanced preferably on single plane on automatic balancing machine with extreme measuring accuracy by using air bearings to minimize errors (residual unbalance, clamping error of tooling and deformation of the center bore) in traditional balancing procedures.

E&E Turbo is also the pioneer that has the processing ability to manufacture Titanium-Billet CW for turbochargers in the aftermarket. We utilize Aero & Space aircraft grade material with excellent performance and durability, this material is usually for fan and compressor wheel for jet engine.

E&E offer quality replacement turbochargers for all major brands Garret, BorgWarner (KKK & Schwitzer), MHI, IHI, Holset, Toyota, BMTS, Continental, CZ, Komatsu, Hitachi, Kamaz.

E&E Turbo can be able to supply an extensive range of turbine wheels / shaft & wheels, covering 20 ~ 270 mm diameter with more than 2, 500 different models.

l All E&E Turbo turbine wheels are manufactured using Inconel 713c up to 850° degree with 75% nickel content (Upgraded material M2004 for high end users).So E&E Turbo can make high quality inconel shaft turbine wheel.

l E&E Shaft wheel with plate closed, single or twin piston rings, reverse, cutback and performance ball bearing can be 100% made in house.

l E&E Turbo use Electron Beam Welding and Friction Welding. After electron welding, the welded area is totally inspected by Ultra Sonic Testing to ensure quality and reliability.

l Full-Scale dimensional inspection is conducted after automatic production. Including turbine blades, inducer sizes, exducer sizes, tip height, contour, turbine wheel length etc.

l Automatic-Production Lines allow E&E very proud of being the pioneer in the aftermarket. Now, E&E Turbo has the capability of producing 100,000 pcs per month.

l To improve accuracy, E&E Turbo use Schenck Automatic Balancing machine with air bearings to minimize errors, better than traditional balancing procedures.

E&E Turbo offer high quality wide range vacuum and electronic actuators. Inside diaphragms are made of technical reinforced silicone, pursuing greater endurance. Outside corrosion proof covers are made of special aluminum which can withstand duty stress, high temperature changes during prolonged periods of time.

E&E Turbo can supply more than 1,500 different kinds of quality actuators and various actuator parts (bracket, rod, membrane, silicon hose, electric actuator motor, worm gear, gear box etc ).

E&E Turbo selects aluminum alloy with higher strength-to-weight ratio, higher tensile strength and good corrosion resistance after testing under high temperature. Now, we have more than 2000 kinds of billet compressor wheels available for

• Trial & Small order for performance / racing design;
• Middle & Large Volume production for OE design in the automotive aftermarket;
• Customized order (Interchangeable with casting compressor wheels)
• Anodized billet compressor wheels with a shinny color in surface (Black, Yellow, Red, Blue, etc)

Billet Compressor Wheels we supply are balanced preferably on single plane on automatic balancing machine with extreme measuring accuracy by using air bearings to minimize errors (residual unbalance, clamping error of tooling and deformation of the center bore) in traditional balancing procedures.

E&E Turbo is also the pioneer that has the processing ability to manufacture Titanium-Billet CW for turbochargers in the aftermarket. We utilize Aero & Space aircraft grade material with excellent performance and durability, this material is usually for fan and compressor wheel for jet engine.