Higly aromatic, high foaming product for hard dirt. Use in self service car wash.

Package of high technology to improve all types of diesel, with an excellent adjustment both in ID (direct injection) and IDI (indirect injection) engines. It contains: Antifoaming agent / Stabilizer,fuel improver / Deterrent-protective of deposits /Antioxidant anticorrosion inhibitor / Excellent water dispersion / Energizers of perfect combustion -optimum performance It offers: Almost zero foaming / Clean tanks and reservoirs / Clean gas jets from deposits / Optimum performance,excellent start,consumption reduction

European Union - euro 4 & euro 5 engines

European Union in its effort to restrict the pollution problem, established from October 2006 the legislation – known as euro 4 – that permits NOx emissions up to 3,5 gr/kWh. Next directive – known as euro 5 – that the vehicle manufacturers should comply with the latest in October 2009 regulates emissions NOx at 2,0 gr/kWh. Car Industries selected the solution of Selective Catalytic Reduction (SCR). The basic advantage of SCR technology is the reduction of emissions of Oxides of Nitrogen NOx at 90% - Hydrocarbons HC and Monoxide of coil CO at 50-90% - PM at 30-50%. . How does Selective Catalytic Reduction (SCR) functions? This method combines the optimised combustion of the engine in collaboration with a system of treatment the exhaust emissions, aiming the reduction of the level of pollutant emissions such as oxide of nitrogen (NOx). The basic factor of the procedure is the use of AdBlue. This dilution is sprayed in the exhausts before they reach the catalyst. The high temperature which occurs at that point converts AdBlue into ammonia. Then, while ammonia and the inimical oxides of nitrogen pass through the catalyst, they react with each other and are converted into nitrogen and water vapours, two elements that are not harmful for the atmosphere. In order to meet the current legislation -known as euro 4- the additive should be 3-4% of the quantity of fuel, and for the euro 5 requirement it is 5-7 %.

ΑdBlue Quality

It is important to refer to the AdBlue’s quality, which should be high. The use of an additive that does not meet the requirements of DIN 70070 and ISO 22241 will cause various problems that may start from increased emission of exhausts and result in the total destruction of the catalyst. It can also cause various problems to the engine due to the increased pressure of exhaust fumes since they can not be removed correctly on time from the catalyst. This is a result of the low quality of AdBlue that reduces the size of the catalyst’s pores and deactivates the catalytic elements in the internal. Voulis Chemicals is ready to supply high quality AdBlue and provide you with any specialised information you may wish.

ISO 22241-5 (DIN 700070)

CEFIC - QUALITY ASSURANCE GUIDANCE DOCUMENT AUS 32

Highly perfumed micro-technology powder suitable for self-service car wash stations with special feeding funnel and stirrer.Offers quick dirt removal

Higly aromatic, high foaming product for hard dirt. Use in self service car wash.

Package of high technology to improve all types of diesel, with an excellent adjustment both in ID (direct injection) and IDI (indirect injection) engines. It contains: Antifoaming agent / Stabilizer,fuel improver / Deterrent-protective of deposits /Antioxidant anticorrosion inhibitor / Excellent water dispersion / Energizers of perfect combustion -optimum performance It offers: Almost zero foaming / Clean tanks and reservoirs / Clean gas jets from deposits / Optimum performance,excellent start,consumption reduction

European Union - euro 4 & euro 5 engines

European Union in its effort to restrict the pollution problem, established from October 2006 the legislation – known as euro 4 – that permits NOx emissions up to 3,5 gr/kWh. Next directive – known as euro 5 – that the vehicle manufacturers should comply with the latest in October 2009 regulates emissions NOx at 2,0 gr/kWh. Car Industries selected the solution of Selective Catalytic Reduction (SCR). The basic advantage of SCR technology is the reduction of emissions of Oxides of Nitrogen NOx at 90% - Hydrocarbons HC and Monoxide of coil CO at 50-90% - PM at 30-50%. . How does Selective Catalytic Reduction (SCR) functions? This method combines the optimised combustion of the engine in collaboration with a system of treatment the exhaust emissions, aiming the reduction of the level of pollutant emissions such as oxide of nitrogen (NOx). The basic factor of the procedure is the use of AdBlue. This dilution is sprayed in the exhausts before they reach the catalyst. The high temperature which occurs at that point converts AdBlue into ammonia. Then, while ammonia and the inimical oxides of nitrogen pass through the catalyst, they react with each other and are converted into nitrogen and water vapours, two elements that are not harmful for the atmosphere. In order to meet the current legislation -known as euro 4- the additive should be 3-4% of the quantity of fuel, and for the euro 5 requirement it is 5-7 %.

ΑdBlue Quality

It is important to refer to the AdBlue’s quality, which should be high. The use of an additive that does not meet the requirements of DIN 70070 and ISO 22241 will cause various problems that may start from increased emission of exhausts and result in the total destruction of the catalyst. It can also cause various problems to the engine due to the increased pressure of exhaust fumes since they can not be removed correctly on time from the catalyst. This is a result of the low quality of AdBlue that reduces the size of the catalyst’s pores and deactivates the catalytic elements in the internal. Voulis Chemicals is ready to supply high quality AdBlue and provide you with any specialised information you may wish.

ISO 22241-5 (DIN 700070)

CEFIC - QUALITY ASSURANCE GUIDANCE DOCUMENT AUS 32