Using the integrated wireless module, MANOSKOP® 766 DAPTIQ can communicate bidirectionally with other tools, appliances and the PPC and, in this way, receive instructions and settings. An ideal capability in production in the context of Industry 4.0.

For the user, this has a decisive advantage: he or she can concentrate fully on the task in hand – it is not necessary to adjust any settings. For the enterprise, the benefi ts are far greater: production processes run more efficiently, the »human factor« as a possible source of errors is minimised in many process steps and consistently high product quality is ensured. At the same time, induction and instruction times are much reduced. And the PPC can independently read out and store all the data required for legally watertight documentation purposes.

INTELLIGENT

MANOSKOP® 766 DAPTIQ is the ideal torque tool for highly flexible, semiautomated work environments. It is integration- and Industry 4.0 capable thanks to its bidirectional open-source interface and wireless module.

ACCURATE

MANOSKOP® 766 DAPTIQ transmits signals at extremely short intervals. This means the PPC always has a detailed picture of the current tightening action and can intervene precisely if necessary.

INTEGRATION CAPABLE

STAHLWILLE has made all the control commands for the MANOSKOP® 766 DAPTIQ openly accessible. This means that system integrators at the customer’s site can use exactly the commands they need to link the tool into their production workflows in just the way they need.

721QR/20/3/1 Quick

Wheel-fitting set 721QR/20/3/1 Quick made by STAHLWILLE is the ideal choice when it comes to wheel-changing. In addition to the torque wrench, this set also contains three sockets for sizes 17 mm, 19 mm and 20.8 mm that are commonly used for wheel bolts and a Quick-Release extension. This torque tool itself has a special feature – it does not have the conventional mechanism consisting of a spiral spring. Instead, its trigger principle is based on a flexible rod. This means it is not necessary to reset the wrench to zero during breaks or for storage. While in other models the spring will show signs of fatigue when it is under permanent tension and the tool becomes inaccurate, Stahlwille's torque wrench stays within the tolerance limits.

The required torque is set with an easy to operate clamping lever in the handle, while the QuickRelease safety lock enables fast, safe changing of the insert tools by locking the sockets in place on the mount and only releasing them again when the button is pressed.

This 5-pce. wheel-fitting set is safely housed in a sturdy, convenient plastic case and offers the most important tools for wheel changing in a single set.

The TTS93 tool trolley is the new entry-level model in the series and features excellent functionality, is well equipped and has an attractive design.

A lot of valuable time is lost in daily practice just looking for the right tool. If, on the other hand, everything is quickly to hand and tidily arranged, this makes a significant contribution to improved productivity. The new TTS93 tool trolley from Stahlwille enables tools to be stored neatly, has an attractive design and the tools included leave nothing to be desired, even for demanding users.

The robust construction ensures a long service life of the tool trolley, even when it is subjected to tough everyday operational conditions and on mobile assignments. The worktop is made of durable ABS material and has a raised edge to prevent small parts from rolling off. Three storage compartments each to the left and right of the worktop offer clear sorting options and quick access to materials as they are needed during work.

The six ball-bearing mounted drawers in the TTS93 run smoothly and can be fully extended. Four of the drawers are 75 mm high, the two lower ones have heights of 155 mm and 205 mm respectively and can also accommodate larger tools and bulky accessories. In conjunction with tool inlays and the variable drawer dividers, tools can be ideally arranged to suit immediate needs and ensure convenient removal and storage.

Multi-stage safety concept

The tool trolley has central locking with a key that can be folded to the side. The lock is located to the top right of the drawers, so that the key does not interfere with the operation of the drawers. The wrap-around plastic bumper provides impact protection while effectively preventing damage and scratches to sensitive surfaces and even injuries when manoeuvring or if the trolley accidentally gets stuck. Protection against the trolley toppling is ensured by the fact that only one drawer can be opened at a time.

The sturdy metal trolley construction means it can support loads of up to 500 kg. The bottom drawer has a load capacity of 45 kg. There is space for hooks in the perforated side walls of the trolley. The working height of 1000 mm enables strain-free working in an upright posture. The four rubber-tyred light-weight wheels with a diameter of 125 mm are resistant to oil and acid and are equipped with carpet protection to prevent blockages due to the ingress of dirt and fibres. Two of the wheels have parking brakes that guarantee the trolley will stay put. The sturdy handles at both ends can be firmly grasped even with dirty hands or gloves.

Equipment variants for every need

The TTS93 tool trolley is offered by Stahlwille both empty and with a choice e.g. of 130 tools ideally suited for use in the automotive sector. The equipment includes sockets, a set of bits, screwdrivers, pliers and cutters through to spanners.

TORSIOTRONIC – this is the name behind the first electromechanical torque screwdriver in the world. The patented trigger system, based on a ball mechanism, trips with audible and tactile signals when the target torque is reached. The tool measures as accurately as only an electronic torque tool can. The fine-tooth ratchet, a wide range of programming options and a micro-USB interface make the TORSIOTRONIC the ideal tool when it comes to logging work steps, applying very small torques or following complex tightening sequences.

UNIQUE.

The first electromechanical torque screwdriver on the market – combines the accuracy of electronic measurement with the convenience of the »click« from mechanical trigger mechanisms.

SENSITIVE.

Integrated ratcheting bit-holder with 80 teeth that provide a particularly small ratchet angle of only 4.5° and thus enable particularly sensitive working – ideal for hard-to-reach fasteners.

SAFE.

After the tool trips, the slip mechanism prevents the preset tightening torque from being inadvertently exceeded, which protects against overtightening.

BRILLIANT.

Clear display of all the relevant information in a bright, battery-saving colour OLED display – readable at almost any angle.

LEFT AND RIGHT.

Whether the tool is set to indicating only or clicking – both modes can be applied clockwise or anticlockwise.

READY WHEN YOU ARE.

Long-lasting battery charge with battery-saving stand-by mode. The rechargeable batteries can be quickly and easily changed.

LOGGING FUNCTION.

Stores up to 2500 fasteners and sequences for reading out and documenting on the PC later by means of the integrated micro-USB interface.

INTUITIVELY SIMPLE.

Easy learning curve thanks to almost selfexplanatory controls and an easily understood menu structure.

Using the integrated wireless module, MANOSKOP® 766 DAPTIQ can communicate bidirectionally with other tools, appliances and the PPC and, in this way, receive instructions and settings. An ideal capability in production in the context of Industry 4.0.

For the user, this has a decisive advantage: he or she can concentrate fully on the task in hand – it is not necessary to adjust any settings. For the enterprise, the benefi ts are far greater: production processes run more efficiently, the »human factor« as a possible source of errors is minimised in many process steps and consistently high product quality is ensured. At the same time, induction and instruction times are much reduced. And the PPC can independently read out and store all the data required for legally watertight documentation purposes.

INTELLIGENT

MANOSKOP® 766 DAPTIQ is the ideal torque tool for highly flexible, semiautomated work environments. It is integration- and Industry 4.0 capable thanks to its bidirectional open-source interface and wireless module.

ACCURATE

MANOSKOP® 766 DAPTIQ transmits signals at extremely short intervals. This means the PPC always has a detailed picture of the current tightening action and can intervene precisely if necessary.

INTEGRATION CAPABLE

STAHLWILLE has made all the control commands for the MANOSKOP® 766 DAPTIQ openly accessible. This means that system integrators at the customer’s site can use exactly the commands they need to link the tool into their production workflows in just the way they need.

721QR/20/3/1 Quick

Wheel-fitting set 721QR/20/3/1 Quick made by STAHLWILLE is the ideal choice when it comes to wheel-changing. In addition to the torque wrench, this set also contains three sockets for sizes 17 mm, 19 mm and 20.8 mm that are commonly used for wheel bolts and a Quick-Release extension. This torque tool itself has a special feature – it does not have the conventional mechanism consisting of a spiral spring. Instead, its trigger principle is based on a flexible rod. This means it is not necessary to reset the wrench to zero during breaks or for storage. While in other models the spring will show signs of fatigue when it is under permanent tension and the tool becomes inaccurate, Stahlwille's torque wrench stays within the tolerance limits.

The required torque is set with an easy to operate clamping lever in the handle, while the QuickRelease safety lock enables fast, safe changing of the insert tools by locking the sockets in place on the mount and only releasing them again when the button is pressed.

This 5-pce. wheel-fitting set is safely housed in a sturdy, convenient plastic case and offers the most important tools for wheel changing in a single set.

The TTS93 tool trolley is the new entry-level model in the series and features excellent functionality, is well equipped and has an attractive design.

A lot of valuable time is lost in daily practice just looking for the right tool. If, on the other hand, everything is quickly to hand and tidily arranged, this makes a significant contribution to improved productivity. The new TTS93 tool trolley from Stahlwille enables tools to be stored neatly, has an attractive design and the tools included leave nothing to be desired, even for demanding users.

The robust construction ensures a long service life of the tool trolley, even when it is subjected to tough everyday operational conditions and on mobile assignments. The worktop is made of durable ABS material and has a raised edge to prevent small parts from rolling off. Three storage compartments each to the left and right of the worktop offer clear sorting options and quick access to materials as they are needed during work.

The six ball-bearing mounted drawers in the TTS93 run smoothly and can be fully extended. Four of the drawers are 75 mm high, the two lower ones have heights of 155 mm and 205 mm respectively and can also accommodate larger tools and bulky accessories. In conjunction with tool inlays and the variable drawer dividers, tools can be ideally arranged to suit immediate needs and ensure convenient removal and storage.

Multi-stage safety concept

The tool trolley has central locking with a key that can be folded to the side. The lock is located to the top right of the drawers, so that the key does not interfere with the operation of the drawers. The wrap-around plastic bumper provides impact protection while effectively preventing damage and scratches to sensitive surfaces and even injuries when manoeuvring or if the trolley accidentally gets stuck. Protection against the trolley toppling is ensured by the fact that only one drawer can be opened at a time.

The sturdy metal trolley construction means it can support loads of up to 500 kg. The bottom drawer has a load capacity of 45 kg. There is space for hooks in the perforated side walls of the trolley. The working height of 1000 mm enables strain-free working in an upright posture. The four rubber-tyred light-weight wheels with a diameter of 125 mm are resistant to oil and acid and are equipped with carpet protection to prevent blockages due to the ingress of dirt and fibres. Two of the wheels have parking brakes that guarantee the trolley will stay put. The sturdy handles at both ends can be firmly grasped even with dirty hands or gloves.

Equipment variants for every need

The TTS93 tool trolley is offered by Stahlwille both empty and with a choice e.g. of 130 tools ideally suited for use in the automotive sector. The equipment includes sockets, a set of bits, screwdrivers, pliers and cutters through to spanners.