Exhibitors & products 2024

Techtronic Industries Central Europe GmbH

HVAC air door actuator

HVAC air door actuator

Techtronic Industries Central Europe GmbH

Supplier profile All products

Contact supplier

Description

Control to turn on/off the damper

More from us

Our website

More products by Techtronic Industries Central Europe GmbH

M18 FMTIW2F12 - 1/2˝ mid-torque impact wrench with friction ring

Most versatile cordless impact wrench in the MILWAUKEE® impressive arsenal with an industry-leading performance at 881 Nm of nut-busting torque and 745 Nm of fastening torque
Incredibly compact design for this performance level, with only 152 mm overall length ideal for applications in tight spaces
4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
Auto shut-off control applies no more than 47 Nm of torque for hand-tight fastening applications to prevent over-tightening
Tri-LEDs deliver high definition lighting to increase workspace visibility
1/2˝ square friction ring
Reversible belt hook
The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE® M18™ batteries

M12 FHIR14LR - 1/4˝ extended reach high speed ratchet

With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user
19 mm low profile head design and extended neck allow users better access in tight spaces
The industry leading FUEL™ technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
Variable speed metal trigger provides ultimate control of the tool
Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE® M12™ batteries

M12 UHL - LED underhood light

TRUEVIEW™ high definition light output delivers consistent beam, optimised colour temperature and true representation of colours and detail
Two light output settings with 1350 and 600 lumens to maximise run time and to optimise lighting output
M12™ 4.0 Ah battery provides 4 hours of run time in high and 8 hours of run time in low setting
Mounting hooks extend 119 cm - 196 cm (47˝ - 77˝) covering wide cars and trucks
Flexible and versatile light bar to rotate vertically, adjust position and remove from the carrier to suit user needs
Rubber gripping surface for maximum hold
FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle’s finish
Stainless hook allows to hang the light bar independently from the carrier
Aircraft grade aluminium frame ensures maximum durability
Impact and chemical resistant polycarbonate lens to withstand common automotive fluids
IP54 - protected from dust and splashing water
Flexible battery system: works with all MILWAUKEE® M12™ batteries

TOOLGUARD™ Steel Storage fully equipped with tools

30" TOOLGUARD™ Steel Storage with soft-close drawers, magnetic 240-volt power strip, power tool organizer and 800 kg total weight capacity
Seven drawers filled with premium tools
1/4", 3/8" and 1/2" ratchet range with 90-tooth design and only 4° arc swing for confined work spaces
Spanner range with MAX BITE™ open-end grip reduces rounding and stripping, MAX BITE™ Ratcheting Combination Spanners and Double box wrenches
Tri-Lobe screwdrivers, reversible circlip pliers and hammers
M18FMTIW2F12 M18 FUEL™ 1/2˝ - Mid-Torque Impact Wrench with friction ring, chemical resistand batteries and matching SHOCKWAVE™ impact sockets
The extensive MILWAUKEE® range includes steel storage solutions as well as a variety of hand tools, e.g. hammers, ratchets, sockets, combination wrenches, pliers, screwdrivers, knives and much more

SHOCKWAVE™ Impact sockets

SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability
Best fitting thanks to 6 gripping points
Deep wall construction provides clearance for protruding bolts
Stamped and ink filled diameter markings and laser etched part number for wear resistance
Dual hole design and groove for security accessories
SHOCKWAVE™ IMPACT DUTY accessories from MILWAUKEE® include as well e.g. impact rated HSS-G metal drill bits, screwdriving bits, magnetic nut drivers, step drills and adaptors

M18 FMTIW2F12 - 1/2˝ mid-torque impact wrench with friction ring

Most versatile cordless impact wrench in the MILWAUKEE® impressive arsenal with an industry-leading performance at 881 Nm of nut-busting torque and 745 Nm of fastening torque
Incredibly compact design for this performance level, with only 152 mm overall length ideal for applications in tight spaces
4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
Auto shut-off control applies no more than 47 Nm of torque for hand-tight fastening applications to prevent over-tightening
Tri-LEDs deliver high definition lighting to increase workspace visibility
1/2˝ square friction ring
Reversible belt hook
The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE® M18™ batteries

M12 FHIR14LR - 1/4˝ extended reach high speed ratchet

With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user
19 mm low profile head design and extended neck allow users better access in tight spaces
The industry leading FUEL™ technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
Variable speed metal trigger provides ultimate control of the tool
Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE® M12™ batteries

M12 UHL - LED underhood light

TRUEVIEW™ high definition light output delivers consistent beam, optimised colour temperature and true representation of colours and detail
Two light output settings with 1350 and 600 lumens to maximise run time and to optimise lighting output
M12™ 4.0 Ah battery provides 4 hours of run time in high and 8 hours of run time in low setting
Mounting hooks extend 119 cm - 196 cm (47˝ - 77˝) covering wide cars and trucks
Flexible and versatile light bar to rotate vertically, adjust position and remove from the carrier to suit user needs
Rubber gripping surface for maximum hold
FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle’s finish
Stainless hook allows to hang the light bar independently from the carrier
Aircraft grade aluminium frame ensures maximum durability
Impact and chemical resistant polycarbonate lens to withstand common automotive fluids
IP54 - protected from dust and splashing water
Flexible battery system: works with all MILWAUKEE® M12™ batteries

TOOLGUARD™ Steel Storage fully equipped with tools

30" TOOLGUARD™ Steel Storage with soft-close drawers, magnetic 240-volt power strip, power tool organizer and 800 kg total weight capacity
Seven drawers filled with premium tools
1/4", 3/8" and 1/2" ratchet range with 90-tooth design and only 4° arc swing for confined work spaces
Spanner range with MAX BITE™ open-end grip reduces rounding and stripping, MAX BITE™ Ratcheting Combination Spanners and Double box wrenches
Tri-Lobe screwdrivers, reversible circlip pliers and hammers
M18FMTIW2F12 M18 FUEL™ 1/2˝ - Mid-Torque Impact Wrench with friction ring, chemical resistand batteries and matching SHOCKWAVE™ impact sockets
The extensive MILWAUKEE® range includes steel storage solutions as well as a variety of hand tools, e.g. hammers, ratchets, sockets, combination wrenches, pliers, screwdrivers, knives and much more

SHOCKWAVE™ Impact sockets

SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability
Best fitting thanks to 6 gripping points
Deep wall construction provides clearance for protruding bolts
Stamped and ink filled diameter markings and laser etched part number for wear resistance
Dual hole design and groove for security accessories
SHOCKWAVE™ IMPACT DUTY accessories from MILWAUKEE® include as well e.g. impact rated HSS-G metal drill bits, screwdriving bits, magnetic nut drivers, step drills and adaptors

M18 FMTIW2F12 - 1/2˝ mid-torque impact wrench with friction ring

Most versatile cordless impact wrench in the MILWAUKEE® impressive arsenal with an industry-leading performance at 881 Nm of nut-busting torque and 745 Nm of fastening torque
Incredibly compact design for this performance level, with only 152 mm overall length ideal for applications in tight spaces
4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
Auto shut-off control applies no more than 47 Nm of torque for hand-tight fastening applications to prevent over-tightening
Tri-LEDs deliver high definition lighting to increase workspace visibility
1/2˝ square friction ring
Reversible belt hook
The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE® M18™ batteries

M12 FHIR14LR - 1/4˝ extended reach high speed ratchet

With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user
19 mm low profile head design and extended neck allow users better access in tight spaces
The industry leading FUEL™ technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
Variable speed metal trigger provides ultimate control of the tool
Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE® M12™ batteries

M12 UHL - LED underhood light

TRUEVIEW™ high definition light output delivers consistent beam, optimised colour temperature and true representation of colours and detail
Two light output settings with 1350 and 600 lumens to maximise run time and to optimise lighting output
M12™ 4.0 Ah battery provides 4 hours of run time in high and 8 hours of run time in low setting
Mounting hooks extend 119 cm - 196 cm (47˝ - 77˝) covering wide cars and trucks
Flexible and versatile light bar to rotate vertically, adjust position and remove from the carrier to suit user needs
Rubber gripping surface for maximum hold
FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle’s finish
Stainless hook allows to hang the light bar independently from the carrier
Aircraft grade aluminium frame ensures maximum durability
Impact and chemical resistant polycarbonate lens to withstand common automotive fluids
IP54 - protected from dust and splashing water
Flexible battery system: works with all MILWAUKEE® M12™ batteries

All products

1 / 5

More information about the Automechanika

About Automechanika Frankfurt

Product groups, target groups, facts and figures of Automechanika Frankfurt.

Automechanika worldwide

Leading international industry meeting place for the automotive aftermarket.

Content Hub „Gateway to Automotive“

News, industry insights with top experts and a comprehensive, international directory of key automotive players.

Search

Exhibitors & products 2024

HVAC air door actuator

HVAC air door actuator

Techtronic Industries Central Europe GmbH

Description

More from us

More products by Techtronic Industries Central Europe GmbH

TOOLGUARD™ Steel Storage fully equipped with tools

SHOCKWAVE™ Impact sockets

M18 FMTIW2F12 - 1/2˝ mid-torque impact wrench with friction ring

More information about the Automechanika

About Automechanika Frankfurt

Automechanika worldwide

Content Hub „Gateway to Automotive“