RAVENOL Racing 4-T Motobike SAE 10W-40 is a fully synthetic 4-stroke motorcycle engine oil that was specially developed for racing use with USVO® & CleanSynto® technology.

It is designed 100% on a PAO and ester basis and can therefore also be classified as "fully synthetic" according to German law. Thanks to a special formulation based on the new RAVENOL racing technology, we achieve a perfect combination for the engine, transmission and clutch. The excellent properties of the fully synthetic PAO base oils and esters ensure maximum performance and reliable protection against wear.

With RAVENOL Racing 4-T Motobike SAE 10W-40 a motorcycle oil was developed that can be used in racing as well as in normal road operation.

The excellent cold start behavior ensures optimum lubrication safety in the cold running phase. With significant fuel savings, RAVENOL Racing 4-T Motobike SAE 10W-40 helps to protect the environment by reducing emissions.

Application Note

RAVENOL Racing 4-T Motobike SAE 10W-40 is the ideal synthetic lubricating oil for very powerful 4-stroke engines. The formulation guarantees maximum protection for all engine components.

RAVENOL Racing 4-T Motobike SAE 10W-40 makes shifting easier, so that the gears can be engaged and changed precisely, quietly and smoothly. The efficiency is reflected in the very low friction of the engine components, while maintaining maximum performance.

RAVENOL Racing 4-T Motobike SAE 10W-40 can be used both on the road and on the racetrack.

Characteristics

• Better performance than conventional motorcycle oils and optimal protection
• Maximum performance & acceleration through reduced friction and improved engine cleanliness
• Perfect match to racing
• Extreme reduction of wear
• Very stable viscosity index thanks to high shear stability
• Fast oiling of the engine
• Prevention of sludge, varnishing, coking and corrosion
• Prevention of oil-related deposits in combustion chambers, in the piston ring zone and on the valves

The RAVENOL Dynamic Exchanger is a service device for dynamic transmission oil service.

The device carries out the rinsing and the lubricant change in the same work step.

The RAVENOL Dynamic Exchanger is made of sheet steel and has a storage system for the fresh and used oil. The operation doesn't require any vulnerable connection electronics and guarantees working comfort, reliability and operational safety. The user will be guided step by step through the process according to the vehicle parameters. He can choose whether to rinse the transmission unit with cleaning agents or with fresh oil.

In service or as a preventive measure, the Dynamic Exchanger offers the following new features:

• fully automatic operating procedure (automatic flushing function & dynamic oil change function)
• automatic checking and detection of the flow direction (previously only manual assignment)
• 2 sight glasses (Tmax = 100 ° C and pmax = 20 bar)
• high quality hydraulic lines
• more user-friendly control software

The further development includes many improvements which supports the user in operational practice.

Characteristics

• Mobile service device for automatic transmissions also for continuously variable (CVT) (CVT) and dual clutch transmissions (DCT)
• Automatic control for transmission flushing and filling
• Intuitive menu navigation
• Individual process and device programming possible
• Multilingual menu navigation
• Integrated database from RAVENOL & HaynesPro®
• Suitability for the use of special cleaning agents
• 5 inch color touch screen
• Colored control lamps for device status
• Integrated thermal printer for logging vehicle and process data
• Containers for detergents
• Various connection adapters included in delivery
• Integrated pump unit (6.6 l / min.)
• Replaceable oil filter (10µ)
• Supply voltage 12-15 V DC (mobile supply via vehicle battery)
• Working pressure pmax = 7 bar Device dimensions: H120 / W60 / D47
• Weight: 100 kg

Do you already know our proven RAVENOL additives for diesel and petrol fuel systems as well as for the engine? A reason to get excited: our popular additives will be presented at Automechanika with a new look and improved formulation - with new names, a new design and in new cans!

But the best thing is that they will also have an optimized formulation that will enable them to solve problems and challenges in fuel and engine systems of all kinds even more effectively.

Look forward to these products today:

• 1390206 RAVENOL Petrol Power Performance
• 1390207 RAVENOL Petrol Clean Extreme
• 1390209 RAVENOL Petrol Octane Booster
• 1390246 RAVENOL Diesel Power Performance
• 1390249 RAVENOL Diesel Cetane Booster
• 1390247 RAVENOL Diesel Clean Extreme
• 1390250 RAVENOL DPF Cleaner
• 1390323 RAVENOL Professional Engine Cleaner

Advantages of the new formula:

• Improved cleaning effect
• Reduction of fuel consumption
• Reduction of pollutant emissions
• Optimum engine performance
• Smoother engine running
• Longer service life of the vehicle

Look forward to our newly designed and optimized additives and enjoy the improved performance!

RAVENOL Ultra Fuel Economy UFE SAE 0W-8 is a PAO (Polyalphaolefin) based, full synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection.

Due to the USVO® technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO® technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil lubricate faster, thereby minimizing friction while keeping the engine clean and efficient.

RAVENOL Ultra Fuel Economy UFE SAE 0W-8 was formulated with tri-nuclear molybdenum and OFM (Organic Friction Modifiers), in order to achieve minimal friction, wear and fuel consumption with excellent cold start characteristics.

RAVENOL Ultra Fuel Economy UFE SAE 0W-8 is especially recommended for hybrid vehicles. Thanks to its new formulation, it provides a safe layer of lubrication even at very high operating temperatures. It protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase.

By significantly reducing fuel consumption, RAVENOL Ultra Fuel Economy UFE SAE 0W-8 helps to protect the environment by reducing emissions.

RAVENOL Ultra Fuel Economy UFE SAE 0W-8 minimizes friction, wear and fuel consumption with excellent cold start characteristics. Extended oil change intervals according to the manufacturer’s instructions.

Application Note

RAVENOL Ultra Fuel Economy UFE SAE 0W-8 is suitable as a high performance, low-viscosity engine oil for demanding engines, especially for new vehicles from the Asian region such as Toyota, Honda or Nissan. It is recommended for modern passenger car petrol engines, including the supercharge models and for direct injection engines and hybrid vehicles under all operating conditions, if the engine manufacturer recommends using an ultra low viscosity oil of viscosity grade SAE 0W-8.

Characteristics

• Fuel saving in partial and full load operation
• Excellent wear protection
• High shear stability
• Good detergent and dispersant properties
• Excellent cold start properties even at low temperatures of below -35°C
• A reliable lubrication film even at high operating temperatures
• Low volatility, resulting in low oil consumption
• No oil-related deposits in combustion chambers, in the piston ring zone and on valves
• Compatible with sealing materials
• Extended oil change intervals protect natural resources
• Catalyst suitability
• Ideal for hybrid vehicles

RAVENOL Racing 4-T Motobike SAE 10W-40 is a fully synthetic 4-stroke motorcycle engine oil that was specially developed for racing use with USVO® & CleanSynto® technology.

It is designed 100% on a PAO and ester basis and can therefore also be classified as "fully synthetic" according to German law. Thanks to a special formulation based on the new RAVENOL racing technology, we achieve a perfect combination for the engine, transmission and clutch. The excellent properties of the fully synthetic PAO base oils and esters ensure maximum performance and reliable protection against wear.

With RAVENOL Racing 4-T Motobike SAE 10W-40 a motorcycle oil was developed that can be used in racing as well as in normal road operation.

The excellent cold start behavior ensures optimum lubrication safety in the cold running phase. With significant fuel savings, RAVENOL Racing 4-T Motobike SAE 10W-40 helps to protect the environment by reducing emissions.

Application Note

RAVENOL Racing 4-T Motobike SAE 10W-40 is the ideal synthetic lubricating oil for very powerful 4-stroke engines. The formulation guarantees maximum protection for all engine components.

RAVENOL Racing 4-T Motobike SAE 10W-40 makes shifting easier, so that the gears can be engaged and changed precisely, quietly and smoothly. The efficiency is reflected in the very low friction of the engine components, while maintaining maximum performance.

RAVENOL Racing 4-T Motobike SAE 10W-40 can be used both on the road and on the racetrack.

Characteristics

• Better performance than conventional motorcycle oils and optimal protection
• Maximum performance & acceleration through reduced friction and improved engine cleanliness
• Perfect match to racing
• Extreme reduction of wear
• Very stable viscosity index thanks to high shear stability
• Fast oiling of the engine
• Prevention of sludge, varnishing, coking and corrosion
• Prevention of oil-related deposits in combustion chambers, in the piston ring zone and on the valves

The RAVENOL Dynamic Exchanger is a service device for dynamic transmission oil service.

The device carries out the rinsing and the lubricant change in the same work step.

The RAVENOL Dynamic Exchanger is made of sheet steel and has a storage system for the fresh and used oil. The operation doesn't require any vulnerable connection electronics and guarantees working comfort, reliability and operational safety. The user will be guided step by step through the process according to the vehicle parameters. He can choose whether to rinse the transmission unit with cleaning agents or with fresh oil.

In service or as a preventive measure, the Dynamic Exchanger offers the following new features:

• fully automatic operating procedure (automatic flushing function & dynamic oil change function)
• automatic checking and detection of the flow direction (previously only manual assignment)
• 2 sight glasses (Tmax = 100 ° C and pmax = 20 bar)
• high quality hydraulic lines
• more user-friendly control software

The further development includes many improvements which supports the user in operational practice.

Characteristics

• Mobile service device for automatic transmissions also for continuously variable (CVT) (CVT) and dual clutch transmissions (DCT)
• Automatic control for transmission flushing and filling
• Intuitive menu navigation
• Individual process and device programming possible
• Multilingual menu navigation
• Integrated database from RAVENOL & HaynesPro®
• Suitability for the use of special cleaning agents
• 5 inch color touch screen
• Colored control lamps for device status
• Integrated thermal printer for logging vehicle and process data
• Containers for detergents
• Various connection adapters included in delivery
• Integrated pump unit (6.6 l / min.)
• Replaceable oil filter (10µ)
• Supply voltage 12-15 V DC (mobile supply via vehicle battery)
• Working pressure pmax = 7 bar Device dimensions: H120 / W60 / D47
• Weight: 100 kg

Do you already know our proven RAVENOL additives for diesel and petrol fuel systems as well as for the engine? A reason to get excited: our popular additives will be presented at Automechanika with a new look and improved formulation - with new names, a new design and in new cans!

But the best thing is that they will also have an optimized formulation that will enable them to solve problems and challenges in fuel and engine systems of all kinds even more effectively.

Look forward to these products today:

• 1390206 RAVENOL Petrol Power Performance
• 1390207 RAVENOL Petrol Clean Extreme
• 1390209 RAVENOL Petrol Octane Booster
• 1390246 RAVENOL Diesel Power Performance
• 1390249 RAVENOL Diesel Cetane Booster
• 1390247 RAVENOL Diesel Clean Extreme
• 1390250 RAVENOL DPF Cleaner
• 1390323 RAVENOL Professional Engine Cleaner

Advantages of the new formula:

• Improved cleaning effect
• Reduction of fuel consumption
• Reduction of pollutant emissions
• Optimum engine performance
• Smoother engine running
• Longer service life of the vehicle

Look forward to our newly designed and optimized additives and enjoy the improved performance!