Operation

1. Connect to the power source:

• Connect the red connector to the positive terminal.
• Connect the black connector to the negative terminal.

2. Turn the power on:

• The operation is normal when the power indicator is green.
• If the power indicator turns yellow, there is a malfunction.
• The machine is equipped with a protective device to prevent damage from improper operation.

3. Use only 1-2 ml of baby oil.

4. Press the start button to begin heating. The indicator will turn yellow during heating. After 90 seconds, there will be sufficient smoke for testing. To stop heating, press the start button again. The heating will start automatically after 5 minutes. Add baby oil as needed.

Notice:

• Use only commercially certified baby oil.
• For DC-12V only.
• The power will automatically turn off in 5 minutes.
• If the indicator light flashes yellow, it indicates that the fuse has burnt out.

Product Overview

With the new cuboid drawer, the TBF series Orgsystem expands its own system to the next level. The basic cuboid drawer consists of two 50mm deep drawers and shares the same footprint as TBF series cases. Cuboid drawers can stack up as a drawer chest or mobile tool trolley. There are many combinations available to set up with TBF series cases and cuboid drawers to suit your work.

FEATURES

• Impact Resistant Body
• Quick Adjust Dividers
• Self-Latching Drawers
• Part of the TBF series Orgsystem
• Metal Ball Bearing Drawer Slides
• Pegboard on Both Sides
• Fully Opening Drawers
• Modular Connectivity with All TBF Series Components

THE MULTI-FUNCTION TOOL KIT FEATURES A DETACHABLE TOP COVER AND BOTTOM TOOL TRAYS. DEPENDING ON WORKPLACE SETTINGS AND JOB REQUIREMENTS, YOU CAN MIX AND MATCH TOOLS NEEDED FOR THE JOB, WHETHER IN THE WORKSHOP OR ON THE ROAD.

THE TOOL TRAYS FIT SEAMLESSLY INTO OUR POPULAR TOOL CHEST SERIES. CONSTRUCTED OF HDPE MATERIAL AND EQUIPPED WITH FOUR SOLID METAL LATCHES, THE TOOL CASE IS ENGINEERED TO BE TOUGH, SAFE, AND EASY TO TRANSPORT TO JOB SITES.

FEATURE

• ELECTRIC OIL SUCTION TOOL SET, POWERED BY A 12V BATTERY (BATTERY NOT INCLUDED), IS EASY TO USE AND DOES NOT REQUIRE AN AIR COMPRESSOR.
• FEATURES A SPECIAL LEVEL DETECTION MECHANISM THAT AUTOMATICALLY SHUTS OFF THE PUMP WHEN THE FLUID LEVEL REACHES 4.3 LITERS TO PREVENT OVERFILLING THE TANK.
• TANK CAPACITY: 5.5 LITERS / 5.8 QUARTS. MADE FROM SPECIAL MATERIALS THAT ARE TRANSPARENT, HEAT-RESISTANT, AND SUITABLE FOR EXTRACTING ENGINE OIL, COOLANT, AND ATF.
• INCLUDES EXTENSION TUBES WITH OUTER DIAMETERS OF Ø 4MM, 6MM, AND 8MM, SUITABLE FOR VARIOUS OIL DIPSTICK TUBES ON DIFFERENT CAR MAKES.
• TOTAL TUBE LENGTH: 2,700 MM / 8.9 FT (MAIN TUBE CONNECTED WITH AN EXTENSION TUBE), ALLOWING ACCESS TO OIL DIPSTICKS IN TALL ENGINE BAYS OF SUVS, PICKUPS, AND LIGHT TRUCKS.
• THE EXTENSION TUBE STORAGE SYSTEM AND TANK LID CAN BE EASILY DETACHED FOR CLEANING PURPOSES.
• FEATURES A STURDY ROUND BASE THAT HOLDS THE TANK SECURELY IN PLACE, PREVENTING WOBBLING.

Operation

1. Connect to the power source:

• Connect the red connector to the positive terminal.
• Connect the black connector to the negative terminal.

2. Turn the power on:

• The operation is normal when the power indicator is green.
• If the power indicator turns yellow, there is a malfunction.
• The machine is equipped with a protective device to prevent damage from improper operation.

3. Use only 1-2 ml of baby oil.

4. Press the start button to begin heating. The indicator will turn yellow during heating. After 90 seconds, there will be sufficient smoke for testing. To stop heating, press the start button again. The heating will start automatically after 5 minutes. Add baby oil as needed.

Notice:

• Use only commercially certified baby oil.
• For DC-12V only.
• The power will automatically turn off in 5 minutes.
• If the indicator light flashes yellow, it indicates that the fuse has burnt out.

Product Overview

With the new cuboid drawer, the TBF series Orgsystem expands its own system to the next level. The basic cuboid drawer consists of two 50mm deep drawers and shares the same footprint as TBF series cases. Cuboid drawers can stack up as a drawer chest or mobile tool trolley. There are many combinations available to set up with TBF series cases and cuboid drawers to suit your work.

FEATURES

• Impact Resistant Body
• Quick Adjust Dividers
• Self-Latching Drawers
• Part of the TBF series Orgsystem
• Metal Ball Bearing Drawer Slides
• Pegboard on Both Sides
• Fully Opening Drawers
• Modular Connectivity with All TBF Series Components

THE MULTI-FUNCTION TOOL KIT FEATURES A DETACHABLE TOP COVER AND BOTTOM TOOL TRAYS. DEPENDING ON WORKPLACE SETTINGS AND JOB REQUIREMENTS, YOU CAN MIX AND MATCH TOOLS NEEDED FOR THE JOB, WHETHER IN THE WORKSHOP OR ON THE ROAD.

THE TOOL TRAYS FIT SEAMLESSLY INTO OUR POPULAR TOOL CHEST SERIES. CONSTRUCTED OF HDPE MATERIAL AND EQUIPPED WITH FOUR SOLID METAL LATCHES, THE TOOL CASE IS ENGINEERED TO BE TOUGH, SAFE, AND EASY TO TRANSPORT TO JOB SITES.