This precision tool kit is for extracting and drawing in bushes, bearings, seals etc. Fully universal applications for cars, LGV and HGV. To be used on their own (manual operation) or with a workshop press of suitable size. Depending on requirements, these particular sleeves can also be individually reworked (e.g. recess, etc.) The kit contains 22 x Press Sleeves and 5 pulling spindles with thrust bearings. Specifications Designed for removal and installation of bushes/bearings/seals Universal application for cars / LGV / HGV Suited to silent bearings / Hydraulic bearings / Bushes Etc Compatible with workshop presses 22 Press Sleeves Inside Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75, 80 Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90 5 x Pulling spindles and nuts M10, M12, M14, M16, M18 Heavy duty moulded storage case

.Necessary for pre-tensioning self adjusting clutches before removal or installation.
.Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.
.Features a refitting tool, allowing the clutch adjuster to be wound back, and six alignment adapters.
.Spigot Adapters: Ø15/23, Ø15/28, Ø15/34, Ø21/23, Ø20/23, Ø14/15/20mm.
.Assembly Flywheel Threads: Ø6x1.00, Ø7x1.00, Ø8x1.25mm.
.Supplied in carry-case.

Power Supply: DC 12V
Voltage: 12V
Power: 100W
Flow Rate: 20~30L/min
Output Pressure: 0-20psi
Content:
1*smoke leak detector
1*standard core adaptor
1*adaptor connector
1*valve core wrench
1*smoke hose
1*power cord clamp
1*specialized #22 plug
1*cap plug(H)
1*cap plug(S)
1*test oil 250ml
1*oil bottle 30ml

1. For removal of diesel injectors
2. Various adapters make the kit suitable for most diesel injectors.
.Includes also the following components:
-3 different slide hammers
1.6 kg, 160 mm length
2.7 kg, 460 mm length
5.1 kg, 600 mm length
-2 pulling claws with fork opening
13.7 x 18 mm, 105 mm length
12.7 x 19 mm, 130 mm length
-5 slotted 6-pt 1/2"" sockets, 100 mm length
Sizes 25 - 27 - 28 - 29 - 30 mm

-Injector extractor, sleeve design, with shells
Outer diameter 35 mm
Internal diameter 29 mm
M17 x 1.0 spindle

Pulling adapter with external thread
M27 x 1.0 (3pcs) and M25 x 1.0
Pulling adapter with internal thread
M27 x 1.0 (3pcs)
Sliding hammer adapter for Inner, outer and claw extractor.

This precision tool kit is for extracting and drawing in bushes, bearings, seals etc. Fully universal applications for cars, LGV and HGV. To be used on their own (manual operation) or with a workshop press of suitable size. Depending on requirements, these particular sleeves can also be individually reworked (e.g. recess, etc.) The kit contains 22 x Press Sleeves and 5 pulling spindles with thrust bearings. Specifications Designed for removal and installation of bushes/bearings/seals Universal application for cars / LGV / HGV Suited to silent bearings / Hydraulic bearings / Bushes Etc Compatible with workshop presses 22 Press Sleeves Inside Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75, 80 Outside Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90 5 x Pulling spindles and nuts M10, M12, M14, M16, M18 Heavy duty moulded storage case

.Necessary for pre-tensioning self adjusting clutches before removal or installation.
.Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.
.Features a refitting tool, allowing the clutch adjuster to be wound back, and six alignment adapters.
.Spigot Adapters: Ø15/23, Ø15/28, Ø15/34, Ø21/23, Ø20/23, Ø14/15/20mm.
.Assembly Flywheel Threads: Ø6x1.00, Ø7x1.00, Ø8x1.25mm.
.Supplied in carry-case.

Power Supply: DC 12V
Voltage: 12V
Power: 100W
Flow Rate: 20~30L/min
Output Pressure: 0-20psi
Content:
1*smoke leak detector
1*standard core adaptor
1*adaptor connector
1*valve core wrench
1*smoke hose
1*power cord clamp
1*specialized #22 plug
1*cap plug(H)
1*cap plug(S)
1*test oil 250ml
1*oil bottle 30ml