Skip

Exhibitors & products 2024

CGS-Handschug GmbH

Description

Train, bus and commercial vehicle air conditioning recycling stations Also for other refrigerants like R404A Newest genereation of refrigeration and air conditioning service. Fully automatic service of: recovery, oil drain, nitrogen pressure test, vacuuming, vacuum pressure test, oil- UV charging refrigerant charging available for other safety refrigerants like R404a, simply initiate internal cleaning. Oil and UV charging goes over small scale. Include heat gas injection during recovery to reduce an frozen tube on A/C. With the 8" Touch screen Monitor and the internal Windows PC every service will be record.

Each service is stored for an installation, you can scan the A / C system with an optional scanner and immediately see when and which service you have made in the past. - Database with bus / truck - With fully automatic pressure test over Nitrogen or test gas with protocol (10 litre bottle fits into the unit) - Pressure recording. - Fastest charging unit in its class (120Kg / h) ( A Bus with 10kg of refrigerant requires about 5 minutes to fill.) - Extremely strong dry-running compressor with 1PS and can both liquid and vapour recovery. Herewith we offer one of the fastest devices for suction and filling an A/C system. - During Recovery, hot Refrigerant Gas will be injected back to the A/C System. This stops frozen tubes during recovery and makes recovery much faster. - Refrigerant tank (40 litres 30Kg) can remove and replace quickly should you change the refrigerant. - All service points are done quickly and easily. - Electronic scale heavily load 100Kg. - Touch screen monitor 8" (optional 10"), internal Win XP computer - Operation only with 4key (+ - and confirm back) - 10L Nitrogen or other test gas bottle can be placed into the machine.




Technical Specifications :

1. Recovery : 30kg / h (measured value at 20 ° C at a bus air conditioning. Ideal value of 97kg / h . ) With hot gas injection during recovery (only AR700 AR690)
2. Gas charge : 120kg / h (measured value at 20 ° C at a bus air conditioning . )
3. High power vacuum pump : Free Air Displacement 180 L/min  (Optional 280 L/min possible)
High performance vacuum pump designed for continuous operation. Important for a vacuumpump is less the Capacity of the pump. But more important is, if double stage and how fast it be in a very deep vacuum. 
With our vacuumpumps you can reach a vacuum of 0.02 mbar. 
Our pumps are therefore especially designed for dehumidification of large air conditioners.
5. Recyclingtank : 40 l / 30kg of Refrigerant TÜV approved.
6. Electronic scale with high capacity : 100 kg ( very important. To under-dimensioned scales quickly have defects . )
7. Filter : 60ml water
8. Recovery compressor : 1PS V-engine dry-running , ( no expensive damage due to over -or under- amount of oil
10. WorkingTemperatur  : 5°C -  45°C
11.Optional vacuum sensor to accurately measure the vacuum.




More products by CGS-Handschug GmbH

SLMOBILE

  • kleinste mobile Klima- Servicestation seiner Zeit
  • Vollautomatisch
  • Inkl. Drucker.
  • Ohne Öl Waage. Läuft über Zeitsteuerung, daher keine Defekte an der empfindlichen Öl- Waage,
  • Datenbank NFZ Land- Baumaschinen
  • Maße 60x60x42cm
  • Gewicht 38kg
  • Robustes pulverbeschichtetes Aluminium- Gehäuse
  • Fahrbar

 
CGS bietet die kleinste vollautomatische mobile Klima- Servicestation seiner Zeit.
Dank seiner kleinen Bauform, passt es in jedes Fahrzeug und kann auch von einer Person ein- und ausgeladen werden.
Der Tank ist abnehmbar und kann sicher im Fahrzeug verstaut werden, das heißt dass beim Transport die sehr robuste Edelstahl-Waage nicht belastet wird.
 
Die Öl-Einfüllung erfolgt über eine Zeitsteuerung, daher können auch keine Schäden an einer empfindlichen Öl-Waage entstehen.
 
Standartmäßig ist eine umfangreiche Datenbank mit NFZ, Baumaschinen und Landmaschinen vorhanden.
Der erfolgte Service kann direkt auf dem standartmäßigem Drucker ausgedruckt werden.
Selbst große Anlagen, wie ein Mähdrescher, kann mit den standartmäßigen 6m Schläuchen einfach erreicht werden. Sehr oft reicht es auch aus, das Servicegerät im Fahrzeug stehen zu lassen und mit den 6m Schläuchen ohne ausladen direkt einen Service zu vollziehen.
Trotz kleinster Bauform ist eine sehr starke 2- Stufige Vakuumpumpe eingebaut, womit Sie auch bei tieferen Temperaturen, ein sehr tiefes Vakuum in kurzer Zeit erreichen können.
Durch den leistungsstarken Kompressor und der einzigartig schnellen Füllmethode, können Sie selbst große Anlage wie Mähdrescher, Klein- Busse usw. bearbeiten.
 
Das Gehäuse wird komplett aus pulverbeschichtetem Aluminium gefertigt und ist somit auch Änderungen gegenüber offen und sehr robust.

Sie können die EInheit auf die Version wie SL800 erweitern. Hiermit können Sie das Gerät über einen externen PC bedienen




  1. Absaugleistung: 1/4PS ; 15kg/h
  2. Füllleistung: 90kg/h
  3. Hochleistungs- Vakuumpumpe: 70 l/min - Hochleistungsvakuumpumpe für den Dauerbetrieb ausgelegt, ausschlaggebend an der Pumpe ist weniger die Pumpenleistung/min, sondern, dass diese in relativ kurzer Zeit einen sehr tiefen Unterdruck erzeugt unsere Pumpen erzeugen 0,00004 Bar . Unsere Pumpen sind dadurch speziell zum Entfeuchten von großen Klimaanlagen ausgelegt.
  4. Recyclingtank: 12,5 l; 10kg TÜV geprüft.
  5. Elektronische Waage mit Wiegekapazität: 50 kg
  6. Filterkapazität: 60ml Wasser
  7. Kompressorleistung: 1/4 PS
  8. Arbeitstemperatur: 5°C 45°C