Wheel stand set can be used with a wide range of lifts and collision repair systems and it enables access to the entire vehicle chassis for repair jobs. With multifunctional wheel stands you can expand the usability of two-pillar and scissor lifts.

Wheel stand set includes 4 pcs of fork type wheel stands that are equipped with, making them easily movable. The wheel stand has three height settings. The set is ideal for various tasks such as car chassis repair, rocker panel replacement, paint jobs, and the removal of electric car batteries. The maximum weight capacity for vehicles used with this set is 3000 kg.

Usability of the set can be expanded even further with optional wheel set, which helps removal, transfer and installation of wheels with vehicle lift. Additional accessory sets are also available to further extend the capabilities of the wheel stand set.

UPCOMING NOVELTY EzCalipre LT: Electronic P2P tram gauge for vehicle measuring, a lighter version of the famous EzCalipre3D tram gauge!

---

EzCalipre 2/3D

Autorobot EzCalipre3D is the latest model of our measuring system line and it is the first tram gauge in the world with 3D measuring mode. EzCalipre is an advanced electronic measuring device for exact verification of vehicle chassis and body condition and for damage documentation.

The tram gauge is easily portable and movable, it can be used for 2D/3D measuring in all kinds of surroundings, and therefore it opens up whole new scopes for vehicle estimation. EzCalipre’s technique is supported by Autorobot’s own, very comprehensive vehicle data files (approximately 60 reference points on the car-specific datasheet). Autorobot EzCalipre tram gauge uses wireless WLAN technique and it has a very unique capability to measure height differences (patented feature). EzCalipre and the measuring software (Datasheet Suite) has been produced for over 10 years and the current version of EzCalipre tram gauge (760EL+) is 4th edition. Latest development work has improved the accuracy as well as the use of the system.

Areas of use of the measuring device

Autorobot EzCalipre is suitable for measuring passenger vehicles, cross country vehicles and vans, and it’s most essential purpose is to serve body shop diagnostics and structural vehicle repair. Wireless and easily portable with the carry case, it is easy to move around. EzCalipre is a mobile solution which adapts to the moving work of insurance company inspectors, for example. EzCalipre provides reports from chassis and/or body points that were saved during the measuring session. It can be used for quick 2D/3D measuring in all kinds of surroundings, and therefore it opens up whole new scopes for vehicle estimation. Patent pending.

Technical information

• Measures length and height difference between measuring heads
• Height measuring is based on reading tram gauge angle (inclination)
• Works together with a computer (not without a PC)
• WLAN connection between tram gauge and computer
• 760EL+: Length 1.14m, extension bars 0.76m and 0.9m, max. total length 2.8m
• Weight approx. 2kg (without extensions)
• Rechargeable Li-Ion battery
• Over 10 hour operating time (760EL+ with Li-Ion battery)

System requirements

• PC with min.2 GHz single core processor (Multi-core processor recommended)
• Microsoft Windows 7, 8/8.1, 10 or 11
• Recommended resolution 1366×768 (800×600 minimum)
• 2 GB RAM (1 GB RAM minimum)
• 2 GB of available hard-disk space (1,5 GB minimum)
• 2x Free USB2 (or higher) interface for WLAN adapter / USB flash drive
• Printer: ink jet or laser (Color printer recommended)
  
  

NOVELTY: Multifunctional Lift/Car straightening bench

Introducing a new, quick car straightening method for repairing small and medium collision damage. The device functions both as a drive-on lift and as a traditional lift with lifting pads. The lifting method can be switched easily and quickly – in about 50 seconds!

NEW! Autorobot C3 is now available with both electro-hydraulic and pneumatic technology. The pneumatic function is especially useful in paint shops and areas where short-term power outages occur.

Introducing a new multifunctional trolley designed for handling wheels and doors of vehicles. This trolley ensures an ideal working position and enhances productivity in body shops.

Multifunctional trolley is designed to ease handling of heavy car wheels and doors, thus saving technicians e.g. from back strain. The trolley is suitable for the removal and installation of the wheels of passenger cars and vans as well as handling of passenger and commercial vehicle doors. With this new multifunctional trolley, e.g. door installations are handy to perform alone without damaging painted surfaces.

The multifunctional trolley has adjustment screw for height movements. A cordless drill/driver can be used instead of a manual crank. Also doors of vans can be handled well with additional set.

Wheel stand set can be used with a wide range of lifts and collision repair systems and it enables access to the entire vehicle chassis for repair jobs. With multifunctional wheel stands you can expand the usability of two-pillar and scissor lifts.

Wheel stand set includes 4 pcs of fork type wheel stands that are equipped with, making them easily movable. The wheel stand has three height settings. The set is ideal for various tasks such as car chassis repair, rocker panel replacement, paint jobs, and the removal of electric car batteries. The maximum weight capacity for vehicles used with this set is 3000 kg.

Usability of the set can be expanded even further with optional wheel set, which helps removal, transfer and installation of wheels with vehicle lift. Additional accessory sets are also available to further extend the capabilities of the wheel stand set.

UPCOMING NOVELTY EzCalipre LT: Electronic P2P tram gauge for vehicle measuring, a lighter version of the famous EzCalipre3D tram gauge!

---

EzCalipre 2/3D

Autorobot EzCalipre3D is the latest model of our measuring system line and it is the first tram gauge in the world with 3D measuring mode. EzCalipre is an advanced electronic measuring device for exact verification of vehicle chassis and body condition and for damage documentation.

The tram gauge is easily portable and movable, it can be used for 2D/3D measuring in all kinds of surroundings, and therefore it opens up whole new scopes for vehicle estimation. EzCalipre’s technique is supported by Autorobot’s own, very comprehensive vehicle data files (approximately 60 reference points on the car-specific datasheet). Autorobot EzCalipre tram gauge uses wireless WLAN technique and it has a very unique capability to measure height differences (patented feature). EzCalipre and the measuring software (Datasheet Suite) has been produced for over 10 years and the current version of EzCalipre tram gauge (760EL+) is 4th edition. Latest development work has improved the accuracy as well as the use of the system.

Areas of use of the measuring device

Autorobot EzCalipre is suitable for measuring passenger vehicles, cross country vehicles and vans, and it’s most essential purpose is to serve body shop diagnostics and structural vehicle repair. Wireless and easily portable with the carry case, it is easy to move around. EzCalipre is a mobile solution which adapts to the moving work of insurance company inspectors, for example. EzCalipre provides reports from chassis and/or body points that were saved during the measuring session. It can be used for quick 2D/3D measuring in all kinds of surroundings, and therefore it opens up whole new scopes for vehicle estimation. Patent pending.

Technical information

• Measures length and height difference between measuring heads
• Height measuring is based on reading tram gauge angle (inclination)
• Works together with a computer (not without a PC)
• WLAN connection between tram gauge and computer
• 760EL+: Length 1.14m, extension bars 0.76m and 0.9m, max. total length 2.8m
• Weight approx. 2kg (without extensions)
• Rechargeable Li-Ion battery
• Over 10 hour operating time (760EL+ with Li-Ion battery)

System requirements

• PC with min.2 GHz single core processor (Multi-core processor recommended)
• Microsoft Windows 7, 8/8.1, 10 or 11
• Recommended resolution 1366×768 (800×600 minimum)
• 2 GB RAM (1 GB RAM minimum)
• 2 GB of available hard-disk space (1,5 GB minimum)
• 2x Free USB2 (or higher) interface for WLAN adapter / USB flash drive
• Printer: ink jet or laser (Color printer recommended)
  
  

NOVELTY: Multifunctional Lift/Car straightening bench

Introducing a new, quick car straightening method for repairing small and medium collision damage. The device functions both as a drive-on lift and as a traditional lift with lifting pads. The lifting method can be switched easily and quickly – in about 50 seconds!

NEW! Autorobot C3 is now available with both electro-hydraulic and pneumatic technology. The pneumatic function is especially useful in paint shops and areas where short-term power outages occur.