Condenser is the key component for the refrigerant state change in the system, the role of the condenser is to ensure that the state of the refrigerant changes from gaseous to liquid form. Through this condensation process, the refrigerant heat is extracted and exchanged with the ambient air. The condenser is placed at the front of car.

In 2020,Evaporator project on line

Oil applied for lubrication plays a significant cooling role. The oil cooler receives the lubricant’s heat and exchanges it with the ambient air or the radiator coolant. Especially in high-performing or downsized engine vehicles, a dedicated oil cooler is an important part of the system. The main series of oil coolers(engine and transmission) producing now are water-cooled. we apply a strict standard during our model testing to ensure meeting its OE quality. The oil cooler development process includes an in-house test series, where the oil cooler is pressure-impulse tested with 200,000 impulses at a pressure of up to 15.0 bar.
Implementing high standard through whole manufacturing process. The parts making is limited to 1 centimillimetre (0.001cm) for accuracy. Nitrogen gas brazing system with operation strictly regulated to assure brazing quality good and stable. Twice air leak test for each product: Manual air leak test firstly then all products will go through the advanced full-automatic air leak testing combined with sticker priting equipment. Only those verified by computer data system, it can have a qualified sitcker. This will greatly lower the risks due to careless omission of manual test.
Our production line now provids a capacity of 5000 pcs monthly. We are expecting to reach to 60000 pcs per month and 720000 pcs annually in very near future.

At present, radiators are available as below: Brazing radiator, Mechanical radiator,flat tube radiator. More than 5,000 types of radiators online. Brazed Radiator: more than 3000 types Mechanical Radiator : 2000 types Ropas radiator monthly capacity: Brazing radiator 30,000pcs Mechanical radiator 50,000pcs

Condenser is the key component for the refrigerant state change in the system, the role of the condenser is to ensure that the state of the refrigerant changes from gaseous to liquid form. Through this condensation process, the refrigerant heat is extracted and exchanged with the ambient air. The condenser is placed at the front of car.

In 2020,Evaporator project on line

Oil applied for lubrication plays a significant cooling role. The oil cooler receives the lubricant’s heat and exchanges it with the ambient air or the radiator coolant. Especially in high-performing or downsized engine vehicles, a dedicated oil cooler is an important part of the system. The main series of oil coolers(engine and transmission) producing now are water-cooled. we apply a strict standard during our model testing to ensure meeting its OE quality. The oil cooler development process includes an in-house test series, where the oil cooler is pressure-impulse tested with 200,000 impulses at a pressure of up to 15.0 bar.
Implementing high standard through whole manufacturing process. The parts making is limited to 1 centimillimetre (0.001cm) for accuracy. Nitrogen gas brazing system with operation strictly regulated to assure brazing quality good and stable. Twice air leak test for each product: Manual air leak test firstly then all products will go through the advanced full-automatic air leak testing combined with sticker priting equipment. Only those verified by computer data system, it can have a qualified sitcker. This will greatly lower the risks due to careless omission of manual test.
Our production line now provids a capacity of 5000 pcs monthly. We are expecting to reach to 60000 pcs per month and 720000 pcs annually in very near future.