Ultrathin Float Glass

Ultrathin float glass is made form high quality raw material silica sand powder, soda ash and dolomite etc., melted in high temperatures furnace. Molten glass flows onto the surface of molten tin in a continuous ribbon bath. After the tin bath it is cooled and annealed in a lehr becoming flat glass. The products can be tempered, insulated, bent and coated processing for different applications.

Rubber and Plastic Products

PVC decorative sealed extruder molding

PVC decorative sealed extruder strip is one or variety of raw materials or other relevant Annex of PVC extruded extrusion molding, through final processing and modified products.

Encapsulation molding

It is  PVC materials by melting heat injection molding machine, high pressure injection mold. The liquid flows naturally around the glass, gradually cooling, forming molding

PU encapsulation molding

1. The product anti-ultraviolet ray, cold resistant, heat-resisting. In a normal environment, no chemical or physical reaction, so as not to harm the environment or passengers. Its performance is better than one PVC encapsulation molding.
2. It is soft, the glass and automobile body not easy be harm.
3. Compared with other molding, sealed superior performance.
4. Inside color, a full vehicle generous and creativity

LOW-EMISSIVITY

Low-Emissivity Coated Glass (Low-E Glass), is a glass coated with several layers of metal or other compounds. It allows the visible light to transmit into the building but blocks the entrance of the most infrared (especially medium-far infrared), which leads to a good heat insulation performance.

Automobile Glass

Modern auto windshields are generally made of two sheets of curved glass with Polyvinyl Butyral (PVB) layer laminated between them in high temperature and high pressure processing . Windshields protect the vehicle's occupants from wind, temperature extremes, sunlight and flying debris such as dust, insects, and rocks by its transparentness, high mechanical strength and light fastness.

SOLAR-X

SALOR-X invented independently by Xinyi, is a products based on the new coating technology, by forming a permanent mental film between the two pieces glass. The outstanding characteristics adiabatic, wearable, oil economization, longeval make it unexampled by the other adiabatic products. And it can be applied to nearly all the cars with different sizes. It filled up the domestic blankness in this field.

Ultrathin Float Glass

Ultrathin float glass is made form high quality raw material silica sand powder, soda ash and dolomite etc., melted in high temperatures furnace. Molten glass flows onto the surface of molten tin in a continuous ribbon bath. After the tin bath it is cooled and annealed in a lehr becoming flat glass. The products can be tempered, insulated, bent and coated processing for different applications.

Rubber and Plastic Products

PVC decorative sealed extruder molding

PVC decorative sealed extruder strip is one or variety of raw materials or other relevant Annex of PVC extruded extrusion molding, through final processing and modified products.

Encapsulation molding

It is  PVC materials by melting heat injection molding machine, high pressure injection mold. The liquid flows naturally around the glass, gradually cooling, forming molding

PU encapsulation molding

1. The product anti-ultraviolet ray, cold resistant, heat-resisting. In a normal environment, no chemical or physical reaction, so as not to harm the environment or passengers. Its performance is better than one PVC encapsulation molding.
2. It is soft, the glass and automobile body not easy be harm.
3. Compared with other molding, sealed superior performance.
4. Inside color, a full vehicle generous and creativity

LOW-EMISSIVITY

Low-Emissivity Coated Glass (Low-E Glass), is a glass coated with several layers of metal or other compounds. It allows the visible light to transmit into the building but blocks the entrance of the most infrared (especially medium-far infrared), which leads to a good heat insulation performance.