BASINOL Truck Longlife 1040 Premium LE is an low-friction engine oil for diesel engines with exhaust gas aftertreatment.

BASINOL Truck Longlife 1040 Premium LE is suitable for use in modern Euro V and VI engines.

Thanks to its excellent oxidation and aging stability, the innovative additives offer maximum fuel savings over the entire oil change interval. The SAE 10W-40 viscosity range ensures a reliable cold start at low external temperatures and full lubricity at high operating temperatures.

The use of shear-stable active ingredients ensures compliance with SAE class 10W-40 during the entire oil change interval. The oil consumption is significantly reduced through minimized evaporation loss.

BASINOL Truck Longlife 1040 Premium LE was specially developed for the supply of exhaust-optimized engines with modern exhaust aftertreatment.

BASINOL Truck Longlife 1040 Premium LE has been tailored to the Euro V and Euro VI emission standards and is used in extremely heavy-duty commercial vehicle diesel engines. Many vehicle and engine manufacturers recommend engine oils of the performance category 10W-40 with the longest oil retention times in turbo diesel engines.

Characteristics
– noticeable fuel savings
– suitable for emission-optimized engines
– suitable for long oil change times
– low evaporation loss
– good viscosity stability
– very good cold start properties

Specifications
ACEA E11/E9, API CI-4/CI-4 Plus/CJ-4/CK-4/SN, JASO DH-1/DH-2

Fullfils
Allison C4, CAT ECF-1a/ECF-2/ECF-3/TO-2, Cummins CES 20076/20077/20078/20081/20086, DD DDC 93K218/93K222/93K215, DEUTZ DQC III-10 LA/III-18 LA, DTFR 15C100, Ford WSS-M2C171-F1, JD JDQ 78 X, Mack EOS-4.5/EO-M Plus/EO-N/EO-N Premium Plus/EO-O Premium Plus, MAN M 3775/3575, MB 228.31, MTU Ölkategorie 2.1, Renault RGD/RLD-3/RLD/RLD-2/RLD-4/RXD, Volvo VDS-4.5/VDS-4/VDS-3

BASINOL® Premium 0530 PRO is an ultra-high-performance long-life engine oil for the latest car engines based on the latest synthesis technology and an innovative additive tailored to it.

Excellent cold start behavior ensures optimal lubrication security in the cold running phase. Extreme loads and high temperatures are safely controlled under all operating conditions. It guarantees a very high level of wear protection, significantly reduced friction losses and is extremely shear-stable.

With the highest demands on fuel savings, BASINOL® Premium 0530 PRO contributes to protecting the environment by reducing emissions (CO2 reduction). The minimal tendency to evaporate reduces the oil consumption and enables the longest oil change intervals in accordance with the respective manufacturer’s instructions.

The use of BASINOL® Premium 0530 PRO prevents the premature fuel ignition LSPI (Low Speed Pre-Ignition) and the associated engine damage.

BASINOL® Premium 0530 PRO is suitable for use in the latest engines such as diesel engines with EURO 6 (DPF) and SCR exhaust gas aftertreatment, as well as gasoline engines with exhaust gas turbocharging and GPF.

It was developed for VW engines with extended maintenance intervals (WIV) and is therefore suitable for oil change intervals of up to 50,000 km or 2 years. BASINOL® Premium 0530 PRO can be used in almost all long-life VW engines and is backwards compatible.

The manufacturer’s specifications for operating fluids must be observed.

BASINOL® Premium 0530 PRO fulfills both the MB specification 229.52 and the MB specifications 229.51 and 229.31 and can be used without any problems in Daimler engines that require this specification.

Characteristics
– Noticeable fuel savings
– extremely high pressure absorption capacity
– suitable for long oil change times
– good shear stability
– excellent wear protection
– optimal good cold start properties
– very low oil consumption

Approval
Mercedes-Benz: MB 229.52

Specifications
ACEA C3, API SP/SN Plus

Fulfills
BMW Longlife-04; Mercedes-Benz: MB-229.51/229.31, Volkswagen 504.00/507.00
FIAT 9.55535-S3, GM-LL-A-025/LL-B-025, Opel/Vauxhall 0401547-D30 (only Diesel)/OV 0401547-G30 (only Gasoline), GM dexos1™Gen2/dexos2™, Porsche C30

BASINOL® Fluid ATF DEX. 6 is an automatic transmission oil, Dexron VI.

BASINOL® Fluid ATF DEX. 6 was developed for use in automatic transmissions, hydraulic steering systems, converters and power transmissions in which an automatic transmission fluid is prescribed that exceeds the requirements of Dexron II and Dexron III.

The special composition of BASINOL® Fluid ATF DEX. 6 extends the life of this fluid compared to older Dexron types.

The product is colored red

Characteristics
– perfect resistance to oxidation
– compatibility with sealing materials
– very good corrosion protection
– good cold fluidity
– excellent wear protection
– excellent cleaning and dispersing power
– Service life is increased
– optimal friction behavior
– very good thermal stability

Fulfills
AW-1, Aisin Warner JWS 3309/3324, Allison TES 228 C3/C4, BMW ETL-7045E/-8027/-LA 2634, Chrysler ATF +3/+4/Dodge Mopar AS 68 RC (Type IV)/Dodge Mopar AS 69 RC (Type IV)/Mopar ATF +2, Dahiatsu ATF D-II/D-III SP, Fiat Type IV, Ford M21 38-CJ/M2C 166-H/M2C 922-A1/M2C 924-A/Mercon® LV, GM DEXRON® II-D/II-E/III-G/ III-H/VI/Typ A, Suffix, Honda ATF DW Z-1/DW-1, Hyundai JWS 3314/9683/SP-II/SP-III/SP-IV, Isuzu Besco Dexron II/III, Jaguar ATF 3403 JLM 20238/ATF 3403 M 115, JASO M 315 Type 1A/M315-2013 1A-LV/M315-2013 2A, Kia SP-II/SP-III/SP-IV, Mazda ATF 3317/D-II/F-1/FZ/M-III/M-V/N-1/S-1, Mercedes-Benz: MB 236.1/236.2/236.3/236.41/236.5/236.7/236.8/236.9, Mini C T-VI, Mitsubishi Dia Queen ATF J2/J3/PA/SP-II/SP-III/SP-IV, Nissan Matic D/J/K/S Fluid, Porsche ATF 3403-M115/Type IV, Subaru ATF-5AT/ATF-HP/ATF/AW-1/ATF 2384K/ATF 3309/ATF 3314/ATF 3317, Toyota ATF D-II/T-III/T-IV/WS, Voith 55.6335.XX, Volkswagen G 052 055/G 052 162/G 052 990/G 055 025/ G 055 162/G 055 540, Volvo 1161540/97335/97340, ZF TE-ML 05L/09/11A/11B/21L/24A/4HP 20/5HP

BASINOL® Premium 020 PRO is an engine oil for gasoline and diesel engines with fuel economy properties.

The extremely low viscosity of this lubricant enables the latest engines to meet specified fuel economy goals.

In addition, the engine oil forms a strong layer that absorbs harmful particles and keeps the engine clean and protected.

The motor oil offers comprehensive protection for a number of modern diesel and gasoline engines for passenger cars and light trucks, which are equipped with or without an exhaust gas aftertreatment system. In addition, it can run on the latest types of fuel, such as B. biofuels and fuels based on ethanol can be used.

With this engine oil, some of the most modern engines can achieve their target fuel efficiency.

BASINOL® Premium 020 PRO can also be used in engines for which engine oils according to ACEA A1 / B1 are required.

Characteristics
– Noticeable fuel savings
– suitable for exhaust-optimized engines
– optimal cold start properties
– very wide operating temperature range
– excellent low oil consumption

Specifications
ACEA C6/C5, API SP/SN Plus/SN RC, ILSAC GF-5, ILSAC GF-6A

Fulfills
BMW Longlife-14FE+/17FE+, Chrysler MS 12145, Fiat 9.55535-GSX, Ford M2C 947-B1, M2C 962-A, Jaguar STJLR.03.5006, Land Rover STJLR.03.5006, MB 229.71/229.72, Opel / Vauxhall OV 0401547-A20, Volvo VCC RBS0-2AE

BASINOL Truck Longlife 1040 Premium LE is an low-friction engine oil for diesel engines with exhaust gas aftertreatment.

BASINOL Truck Longlife 1040 Premium LE is suitable for use in modern Euro V and VI engines.

Thanks to its excellent oxidation and aging stability, the innovative additives offer maximum fuel savings over the entire oil change interval. The SAE 10W-40 viscosity range ensures a reliable cold start at low external temperatures and full lubricity at high operating temperatures.

The use of shear-stable active ingredients ensures compliance with SAE class 10W-40 during the entire oil change interval. The oil consumption is significantly reduced through minimized evaporation loss.

BASINOL Truck Longlife 1040 Premium LE was specially developed for the supply of exhaust-optimized engines with modern exhaust aftertreatment.

BASINOL Truck Longlife 1040 Premium LE has been tailored to the Euro V and Euro VI emission standards and is used in extremely heavy-duty commercial vehicle diesel engines. Many vehicle and engine manufacturers recommend engine oils of the performance category 10W-40 with the longest oil retention times in turbo diesel engines.

Characteristics
– noticeable fuel savings
– suitable for emission-optimized engines
– suitable for long oil change times
– low evaporation loss
– good viscosity stability
– very good cold start properties

Specifications
ACEA E11/E9, API CI-4/CI-4 Plus/CJ-4/CK-4/SN, JASO DH-1/DH-2

Fullfils
Allison C4, CAT ECF-1a/ECF-2/ECF-3/TO-2, Cummins CES 20076/20077/20078/20081/20086, DD DDC 93K218/93K222/93K215, DEUTZ DQC III-10 LA/III-18 LA, DTFR 15C100, Ford WSS-M2C171-F1, JD JDQ 78 X, Mack EOS-4.5/EO-M Plus/EO-N/EO-N Premium Plus/EO-O Premium Plus, MAN M 3775/3575, MB 228.31, MTU Ölkategorie 2.1, Renault RGD/RLD-3/RLD/RLD-2/RLD-4/RXD, Volvo VDS-4.5/VDS-4/VDS-3

BASINOL® Premium 0530 PRO is an ultra-high-performance long-life engine oil for the latest car engines based on the latest synthesis technology and an innovative additive tailored to it.

Excellent cold start behavior ensures optimal lubrication security in the cold running phase. Extreme loads and high temperatures are safely controlled under all operating conditions. It guarantees a very high level of wear protection, significantly reduced friction losses and is extremely shear-stable.

With the highest demands on fuel savings, BASINOL® Premium 0530 PRO contributes to protecting the environment by reducing emissions (CO2 reduction). The minimal tendency to evaporate reduces the oil consumption and enables the longest oil change intervals in accordance with the respective manufacturer’s instructions.

The use of BASINOL® Premium 0530 PRO prevents the premature fuel ignition LSPI (Low Speed Pre-Ignition) and the associated engine damage.

BASINOL® Premium 0530 PRO is suitable for use in the latest engines such as diesel engines with EURO 6 (DPF) and SCR exhaust gas aftertreatment, as well as gasoline engines with exhaust gas turbocharging and GPF.

It was developed for VW engines with extended maintenance intervals (WIV) and is therefore suitable for oil change intervals of up to 50,000 km or 2 years. BASINOL® Premium 0530 PRO can be used in almost all long-life VW engines and is backwards compatible.

The manufacturer’s specifications for operating fluids must be observed.

BASINOL® Premium 0530 PRO fulfills both the MB specification 229.52 and the MB specifications 229.51 and 229.31 and can be used without any problems in Daimler engines that require this specification.

Characteristics
– Noticeable fuel savings
– extremely high pressure absorption capacity
– suitable for long oil change times
– good shear stability
– excellent wear protection
– optimal good cold start properties
– very low oil consumption

Approval
Mercedes-Benz: MB 229.52

Specifications
ACEA C3, API SP/SN Plus

Fulfills
BMW Longlife-04; Mercedes-Benz: MB-229.51/229.31, Volkswagen 504.00/507.00
FIAT 9.55535-S3, GM-LL-A-025/LL-B-025, Opel/Vauxhall 0401547-D30 (only Diesel)/OV 0401547-G30 (only Gasoline), GM dexos1™Gen2/dexos2™, Porsche C30

BASINOL® Fluid ATF DEX. 6 is an automatic transmission oil, Dexron VI.

BASINOL® Fluid ATF DEX. 6 was developed for use in automatic transmissions, hydraulic steering systems, converters and power transmissions in which an automatic transmission fluid is prescribed that exceeds the requirements of Dexron II and Dexron III.

The special composition of BASINOL® Fluid ATF DEX. 6 extends the life of this fluid compared to older Dexron types.

The product is colored red

Characteristics
– perfect resistance to oxidation
– compatibility with sealing materials
– very good corrosion protection
– good cold fluidity
– excellent wear protection
– excellent cleaning and dispersing power
– Service life is increased
– optimal friction behavior
– very good thermal stability

Fulfills
AW-1, Aisin Warner JWS 3309/3324, Allison TES 228 C3/C4, BMW ETL-7045E/-8027/-LA 2634, Chrysler ATF +3/+4/Dodge Mopar AS 68 RC (Type IV)/Dodge Mopar AS 69 RC (Type IV)/Mopar ATF +2, Dahiatsu ATF D-II/D-III SP, Fiat Type IV, Ford M21 38-CJ/M2C 166-H/M2C 922-A1/M2C 924-A/Mercon® LV, GM DEXRON® II-D/II-E/III-G/ III-H/VI/Typ A, Suffix, Honda ATF DW Z-1/DW-1, Hyundai JWS 3314/9683/SP-II/SP-III/SP-IV, Isuzu Besco Dexron II/III, Jaguar ATF 3403 JLM 20238/ATF 3403 M 115, JASO M 315 Type 1A/M315-2013 1A-LV/M315-2013 2A, Kia SP-II/SP-III/SP-IV, Mazda ATF 3317/D-II/F-1/FZ/M-III/M-V/N-1/S-1, Mercedes-Benz: MB 236.1/236.2/236.3/236.41/236.5/236.7/236.8/236.9, Mini C T-VI, Mitsubishi Dia Queen ATF J2/J3/PA/SP-II/SP-III/SP-IV, Nissan Matic D/J/K/S Fluid, Porsche ATF 3403-M115/Type IV, Subaru ATF-5AT/ATF-HP/ATF/AW-1/ATF 2384K/ATF 3309/ATF 3314/ATF 3317, Toyota ATF D-II/T-III/T-IV/WS, Voith 55.6335.XX, Volkswagen G 052 055/G 052 162/G 052 990/G 055 025/ G 055 162/G 055 540, Volvo 1161540/97335/97340, ZF TE-ML 05L/09/11A/11B/21L/24A/4HP 20/5HP