Paints
Beschreibung
CS System Paints
CS System Metallic Base Coat 500 - мatte color autobase with «metallic» and «pearl» effect. It has unique formula for twice better coverage! After covering by 2K acrylic clear coat it ensures high gloss coating resistant to mechanic and atmospheric influences. Available in wide range of colours.
Thinner - CS System Thinner 530
Application in 2-3 layers. Thickness of layer – 45-55 micron.
Mixing proportion (per volume):
Enamel – 100
Thinner – 50-60
Viability: 2-5 min. (t +20°C)
Drying: 10-15 min. (t +20°C)
Apply clear coat not later than 6 h.
Consumption: 1 liter/7-9 m2
CS System Acryl АК-2К-400– top quality acryl enamel intended for professional car and commercial vehicles monochromatic painting. It is two-component system on the basis of hydroxyl-acrylic resin of own production. It is easy to use, durable and suitable for rapid application. Wide choice of hardeners, solvents and special additives allows to develop an optimal technological process for any type of repair. Thus, drying time of the coating, glossiness, structure and elasticity to plastic parts can be regulated. Enamel is fast drying and can be applied in wide range of temperatures.
CS System Acryl АК-2К-400 is produced in vast spectrum of color matching systems including RAL.
It has perfect decorative properties, exceptional gloss, strength, elasticity and light fastness.
Hardener - CS System Hardener 418, 425, 435
Application in two layers. Thickness of layer – 50-60 micron.
Mixing proportion (per volume):
Enamel – 100
Hardener – 50
Thinner – up to 20
Viability: not less than 4 hours
Drying: 4 hours (t +20°C), 30 min. (t+60°C)
Polishing: in 12 hours after drying
Consumption: 1 liter/9-10 m2
CS System PU-2К–high quality polyurethane enamel, intended for professional car and commercial vehicles monochromatic painting. It is two-component system on the basis of polyurethane resins of own production. It is easy to use, durable and suitable for rapid application.
This polyurethane enamel is highly durable and resistant to heavy corrosion, UV in different climatic conditions. Wide choice of hardeners, solvents and special additives allows to develop an optimal technological process for any type of repair. Thus, drying time of the coating, glossiness, structure and elasticity to plastic parts can be regulated. Enamel is fast drying and can be applied in wide range of temperatures.
It has perfect decorative properties, exceptional gloss, strength, elasticity and light fastness.
Applicable surfaces: prepared old covering, primed and sanded surfaces.
Hardener - CS System Hardener PU-2К.
Application in two layers. Thickness of layer – 50-60 micron.
Viability: not less than 6 hours
Drying: 4 - 8 hours (t +20°С), 30 min. — 1 hour (t +60°С)
Polishing: in 12 - 24 hours after drying
Consumption: 1 liter/9-10 m2