Color S.I.M. LLC

Aerosol paints
Zum Produkt
Aerosol paints
Zum Produkt
Aerosol paints
Zum ProduktÜber uns
"Color S.I.M." LLC - the manufacturer of a wide range of paints and varnishes - is a team of scientists, inventors and professionals, which convert an idea into success and leadership at the market.
Our philosophy is to produce top-quality products that provide sustainable long time protection.
During 20 years of experience and steady work we have created complete cycle: idea - raw material - product - application, thus, taking the complete responsibility for the quality of our products.
History:
2001 – Establishing of the company “Color S.I.M.” LLC. Production of the paints for road marking TM “Signakul”
2003 – Start of production of automotive and industrial paints TM “Colorin”
2007 – Forming of road marking service
2011 – Establishing of own patented synthesis of resins “Korezinpol”
2016 – Launching of the new trade mark “CS System” - car refinishing materials
2018 – Start of aerosols production
2019 - Completion of the metallic-bases developement with unique covering
Aiming at constant development of our company due to steady growth and profit markup, we provide new possibilities introducing innovative decisions and new technologies.
In the activity we do not dissociate economic success from protection of environment and social responsibility.
Therefore, all products are made under controlled condition proved by ISO 9001 : 2015 certification.
The production corresponds to the "Environmental Management System" for ISO 14001: 2015 and "Occupational health and safety management systems" for ISO 45001:2018.
Color S.I.M. Competence. In color.
SERVICES
Color S.I.M. has developed competence in the following variety of products:
- Road marking materials
- Car refinishes
- Industrial coatings
- Resins
- Wooden coatings
- Aerosol paints
Car refinishes under trade mark “CS System” are car repair service materials with the use of top quality raw material of our production (resins) and the leading European producers.
Our car refinishes and industrial coatings are developed for sustainable protection of vehicles.
For today we produce polyurethane, epoxy-ether, acrylic, alkyd, hydroxy-acrylic, reactive, saturated and non-saturated resins. On the basis of resins of our production we create all our paints and varnishes.
Product range includes anticorrosion primers (zink filled, epoxide, wash primers), polyester putties, fillers, self-priming enamel topcoats, polyurethane, acrylic, alkyd paints, clear coats and paints in aerosol.
Paints are produced in all color matching systems including RAL and in all possible degree of gloss (from high gloss to matt).
Unsere Produktgruppen
Downloads
Keywords
- Bodywork repairs (materials)
- Corrosion protection
- Paints and varnishes
- Aerosol paints
- Basecoats
Unsere Produkte

Top coats
CS System CLEAR COAT
Clear varnishes CS System CLEAR COAT are final coatings which can be applied on the autobase system. These varnishes create extra gloss and protection of the base coatings from atmospheric, mechanic and chemical influences. They have perfect adhesive properties, uniform laying anddurable, reliable coating. It can be used for partial or full car repair of automobiles or commercial vehicles.
CS System CLEAR COATs are produced on the basis of acrylic resin of own production.
CS System Clear Coat 810 MS – medium solid, two-component acrylic top coat
CS System Clear Coat 830 HS – high solid, two-component acrylic top coat.
CS System Clear Coat 850 ULTRA HS - ultra high solid, two-component acrylic top coat.
CS System Clear Coat CRYSTAL HS – fast drying high solid, two component acrylic top coat.
CS System Clear Coat 810 MS
Hardener - CS System Hardener 830 HS (825, 835)
Application in two - three layers. Thickness of a layer 40-50 micron.
Viability: not less than 7 hours
Drying: 2 hours (t +20°C), 60 min. (t+60°C)
Polishing: in 24 hours after drying
Consumption: 1 liter/7,5-8 m2
CS System Clear Coat 830 HS
Hardener - CS System Hardener 830 HS (825, 835)
Application in two - three layers. Thickness of a layer 40-50 micron.
Viability: not less than 7 hours
Drying: 2 hours (t +20°C), 60 min. (t+60°C)
Polishing: in 24 hours after drying
Consumption: 1 liter/9 m2
CS System Clear Coat 850 ULTRA HS
Hardener - CS System Hardener 850 Ultra HS (845, 855)
Application in two - three layers. Thickness of a layer 40-50 micron.
Viability: not less than 7 hours
Drying: 2 hours (t +20°C), 60 min. (t+60°C)
Polishing: in 24 hours after drying
Consumption: 1 liter/9 m2
CS System Clear Coat CRYSTAL HS
Hardener - CS System Hardener CRYSTAL HS
Application in two layers. Thickness of a layer 40-50 micron.
Viability: not less than 7 hours
Drying: 2 hours (t +20°C), 60 min. (t+60°C)
Polishing: in 24 hours after drying
Consumption: 1 liter/9 m2

Putty
Putties
Putty is the thickest layer in the system which influences the final form of the vehicle body. Its choice depends on the character of damage (dimensions and depth of spots and holes in vehicle body and others) and type of substrate (steel, galvanized steel and aluminum). Putties of CS System has low content of harmful volatile organic compounds (Low V.O.C.).
CS System Polyester PUTTY FULL - two-component coarse-grained polyester putty of primary application with large particles. It serves for filling of big roughnesses and scratches on the surface. Applicable surfaces are chrome and galvanized steel, glass fibre and plastic surfaces (exc.PE and PTFE), steel and aluminum.
CS System Polyester PUTTY UNI– two-component medium-grained polyester putty for universal application. It fills roughnesses and scratches on the surface. Applicable surfaces are chrome and galvanized steel, glass fibre and plastic surfaces (exc.PE and PTFE), steel and aluminum.
CS System Polyester PUTTY FINE – fine-grained polyester putty of final application. It guarantees ideal surface without porosity. Applicable surfaces are chrome and galvanized steel, glass fibre and plastic surfaces (exc.PE and PTFE), steel and aluminum.
CS System Polyester PUTTY GLASS/MICRO GLASS – two-component polyester putty armed by glass fibre. It serves for filling of big roughness and through holes and has carrier function. Applicable surfaces are chrome and galvanized steel, glass fibre and plastic surfaces (exc.PE and PTFE), steel and aluminum. Length of glass fibres: 6 mm/3 mm.
CS System Polyester PUTTY ALU – polyester putty with aluminum particles. It is resistant to vibration and temperature fluctuation. Applicable surfaces are chrome and galvanized steel, glass fibre and plastic surfaces (exc.PE and PTFE), steel and aluminum.
CS System Polyester PUTTY FULL
Coarse-grained. Plastic in application. It is easily sanded without clogging of sanding paper, has high durability and is suitable for infrared drying.
Mixing proportion – 2-3% of hardener.
Drying – 10-15 min.
Sanding – in 20-30 min. 1. P80-P120 2. P120-P240
CS System Polyester PUTTY UNI
Plastic in application. It is easily sanded without clogging of sanding paper, has high durability and is suitable for infrared drying.
Mixing proportion – 2-3% of hardener.
Drying – 10-15 min.
Sanding – in 20-30 min. 1. P80-P120 2. P120-P240
CS System Polyester PUTTY FINE
Fine-grained.For final application.
Plastic in application. It is easily sanded without clogging of sanding paper, has high durability and is suitable for infrared drying.
Mixing proportion – 2-3% of hardener.
Drying – 20-30 min.
Sanding – in 20-30 min. P150-P400.
CS System Polyester PUTTY GLASS/MICRO GLASS
Armed by glass fibre.
Plastic in application. It is easily sanded without clogging of sanding paper, has high durability and is suitable for infrared drying.
Mixing proportion – 2-3% of hardener.
Drying – 15-20 min.
Sanding – in 20-30 min. 1.P80-P120 2. P120-P240.
CS System Polyester PUTTY ALU
Resistant to vibrations and high temperatures
Plastic in application. It is easily sanded without clogging of sanding paper, has high durability and is suitable for infrared drying.
Mixing proportion – 2-3% of hardener.
Drying – 10-15 min.
Sanding – in 20 min. 1. P80-P120 2. P120-P240.

Primers and Fillers
Anticorrosive primers CS System – materials intended to protect body of the vehicle from corrosion, mechanic or environmental influences. They also ensure full adhesion and function as a perfect base for the next layer during сar repair works
Anticorrosive protection can be passive and active.
Passive protection – forming a foil which excludes contact of oxygen with metal.
Active protection – chemical processing of steel after which it becomes chemically inert.
CS System anticorrosive primers:
CS System Washprimer VL-012 – two-component phosphatide primer enriched by zinc chromateand developed for extra quality car refinishes system. It guarantees absolute adhesion and anticorrosive protection to steel, galvanized and stainless steel, aluminum, non-ferrous metals.
CS System Primer ЕP-2K-022 – two-component epoxy primer with high corrosive and chemical resistance. It can be applied on steel, galvanized and stainless steel, aluminum, zinc, polyester putties.
CS System Primer AC-010 — quick-drying one component adhesive primer on the basis of high-quality modified alkyd-acrylic resin with high content of anticorrosive pigments and anticorrosive inhibitors. It is intended for protective layer during full or partial car repair works.
CSSystem Fillers
Fillers are intended for filling of scratches formed while processing of the body by abrasive materials as well as for surface leveling. They are perfect base for application of the next layer of car refinishes. CS System fillers have low content of harmful Volatile Organic compounds.
Applicable surfaces: steel, primers, putties, glass fibre and plastic.
CS System Filler 4+1 HS – two-component high quality filler on the basis of resistant modified hydroxyl-acrylic resin of own production. It is high solid (HS) material, which ensures perfect filling properties. It fills scratches and porosity. Thanks to fine pouring its application provides very smooth and plain surface that minimizes subsequent sanding.
CS System Filler 5+1 HS – two-component high quality filler on the basis of resistant hydroxyl-acrylic resins of 2K-acrylic system of own production.It is high solid (HS) material, which ensures perfect filling properties. It fills scratches and porosity. Thanks to fine pouring its application provides very smooth and plain surface that minimizes subsequent sanding.
1. CS System Washprimer VL-012
Base – polyvinilbytural, hardener – acid activator. Mixing proportion – 1:1
Application by one layer. Thickness of the layer – 8-10 micron.
Drying – up to 30 min. (t +20°C)
Сonsumption – 1 set/25 m2.
Apply next layer in not more than 24 hours.
Attention! Do not apply Washprimer VL-012 on the polyester putties, top coats (base, alkyd and acrylic enamels CS System).
2. CS System Primer ЕP-2К-022
Base – Epoxide resin, Hardener – CS System EP-2K-022. Mixing proportion – 2:1.
Application by two layers. Thickness of the layer – 40-60 micron.
Drying – 2 hours (t +20°C), 30 min. (t+60°C).
Consumption– 1 liter/9m2
3. CS System Primer AC-010
Base – alkyd-acrylic resin. Thinner – CS System-310. Mixing proportion – 4:1.
Application by two layers. Thickness of the layer – 30-40 micron.
Drying – 30 min. (t +20°C), 15 min. (t+60°C).
Consumption – 1 liter/ 8-10 m2
CS System Filler 4+1 HS
Mixing proportion– 4:1
Application in 2 layers. Thickness of the layer 100-120 micron
Drying – 30 min (t +20°C), 10-15 min. (t +60°C)
Sanding – P320-P400
“Wet” sanding – P600-P1000
Consumption – 1 liter/ 6m2
CS System Filler 5+1 HS
Mixing proportion – 5:1
Application in 2 layers. Thickness of the layer 100-120 micron
Drying – 30 min (t +20°C), 10-15 min. (t +60°C)
Sanding – P320-P400
“Wet” sanding – P600-P1000
Consumption – 1 liter/ 6m2

Aerosol paints
- FAST ART – fast drying universal enamel designed for painting of metallic, concrete,glyptography, wooden, glass, paper and other surfaces. Produced in great variety of colors.
- EASY ART QUICK Paint – automobile paint in aerosol.It is used for painting of metal, glass, wooden, concrete and some plastic surfaces.Produced in great variety of colors.
- EASY ART QUICK Primer – high quality alkid-acrylic anticorrosive primer. It protects metal from salt, moisture and corrosion.
- EASY ART QUICK Filler – high quality filler on the basis of resistant modified hydroxy-acrylic resin of own production.
- EASY ART Base – aerosol metalic autobase. It gives the covering original metalic effect.
- EASY ART QUICK Lacquer – high quality acrylic top coat.It protects the surface, gives outstanding gloss and has perfect oil and petrol resistance.
- RESIST ART THERMOSPRAY - specially developed enamel composition on the bases of organosilicon resins intended for coating of the surfaces which are influenced by high temperatures. Depending on the colour the enamel resists the temperatures within +200°C до +400°C. Contains anticorrosive pigments for providing protection from rust. For external and internal works.
- FAST ART WHEELSPRAY - specially developed enamel for wheels guarantees excellent gloss and durability of the coating. Characterised by increased resistance to corrosive environment including gasoline and diesel fuel, mechanical damage and atmospheric
influence. - FAST ART CHROMESPRAY - specially developed enamel composition with chrome effect guarantees excellent gloss and durability of the coating. Characterised by increased resistance to corrosive environment including gasoline and diesel fuel, mechanical
damage and atmospheric influence.

Paints
CS System Paints
CS System Metallic Base Coat 500 - мatte color autobase with «metallic» and «pearl» effect. It has unique formula for twice better coverage! After covering by 2K acrylic clear coat it ensures high gloss coating resistant to mechanic and atmospheric influences. Available in wide range of colours.
Thinner - CS System Thinner 530
Application in 2-3 layers. Thickness of layer – 45-55 micron.
Mixing proportion (per volume):
Enamel – 100
Thinner – 50-60
Viability: 2-5 min. (t +20°C)
Drying: 10-15 min. (t +20°C)
Apply clear coat not later than 6 h.
Consumption: 1 liter/7-9 m2
CS System Acryl АК-2К-400– top quality acryl enamel intended for professional car and commercial vehicles monochromatic painting. It is two-component system on the basis of hydroxyl-acrylic resin of own production. It is easy to use, durable and suitable for rapid application. Wide choice of hardeners, solvents and special additives allows to develop an optimal technological process for any type of repair. Thus, drying time of the coating, glossiness, structure and elasticity to plastic parts can be regulated. Enamel is fast drying and can be applied in wide range of temperatures.
CS System Acryl АК-2К-400 is produced in vast spectrum of color matching systems including RAL.
It has perfect decorative properties, exceptional gloss, strength, elasticity and light fastness.
Hardener - CS System Hardener 418, 425, 435
Application in two layers. Thickness of layer – 50-60 micron.
Mixing proportion (per volume):
Enamel – 100
Hardener – 50
Thinner – up to 20
Viability: not less than 4 hours
Drying: 4 hours (t +20°C), 30 min. (t+60°C)
Polishing: in 12 hours after drying
Consumption: 1 liter/9-10 m2
CS System PU-2К–high quality polyurethane enamel, intended for professional car and commercial vehicles monochromatic painting. It is two-component system on the basis of polyurethane resins of own production. It is easy to use, durable and suitable for rapid application.
This polyurethane enamel is highly durable and resistant to heavy corrosion, UV in different climatic conditions. Wide choice of hardeners, solvents and special additives allows to develop an optimal technological process for any type of repair. Thus, drying time of the coating, glossiness, structure and elasticity to plastic parts can be regulated. Enamel is fast drying and can be applied in wide range of temperatures.
It has perfect decorative properties, exceptional gloss, strength, elasticity and light fastness.
Applicable surfaces: prepared old covering, primed and sanded surfaces.
Hardener - CS System Hardener PU-2К.
Application in two layers. Thickness of layer – 50-60 micron.
Viability: not less than 6 hours
Drying: 4 - 8 hours (t +20°С), 30 min. — 1 hour (t +60°С)
Polishing: in 12 - 24 hours after drying
Consumption: 1 liter/9-10 m2