A complete package of tools, PPE & safety products for workshop use, when servicing or repairing high voltage vehicles. Supplied on a mobile shadow board for ease of access & security.

• An 88pc package of all necessary safety requirements for working on vehicle systems up to 1000v, stored conveniently on a shadow board & mounted on a mobile trolley for ease of movement around workshops and/or bodyshops.
• High visibility ensures nothing can accidentally go missing, & forms part of a safety management process, essential when working on high voltage systems, where there is greater risk of accidental injury to employees.
• Contents : insulated tools & test instruments, high voltage PPE (insulated gloves & face shield), high voltage signage & safety barriers, lock-out procedure safety products, insulated floor matting & shrouding for added safety, rescue pole & electric shock first-aid poster.
• Shadow board is mounted on a stainless steel frame & mobile trolley with base shelves front & rear.

The 8900 kit brings together the Laser 8824 and 8866 kits to form one kit to allow the user to align, set and check the camshaft timing of the Volkswagen group EA 211, EVO 4 cylinder TSi ACT, EA 211 3 & 4 cylinder (without ACT) TSI petrol engines without the need to resort to computer based alignment tools. The 8900 utilises a battery powered digital inclinometer combined with precision manufactured adaptors and alignment tooling to ensure the camshafts are set to the manufacturers specification. There should be no requirement for interaction with the vehicles OBD system when following the Laser tools procedures detailed below.

• Applications include: Audi (from 2017), Seat (from 2015), Skoda (from 2015) & Volkswagen (from 2015).
• Engine applications include: 1.0L, 1.2L, 1.4L, 1.5L & 1.6L TSi Petrol engine. For full engine code list please see applications in downloads.
• Engine variants include: EA 211, EVO 4 cylinder TSi ACT, EA 211 3 & 4 cylinder (without ACT).
• Use only in conjunction with Laser Part Nos. 8824 & 8866 instructions.
• Camshaft pulley holding tools (Laser Part Nos. 7279 & 8421) or similar must be used when loosening or tightening the camshaft pulleys. Made in Sheffield. EU & UK Registered Design.

An innovative PDR dent pulling kit that uses cold glue rather than hot glue. With only the heat from the user's hands required to prep the glue for use, no external heat source is required. The kit includes a guide handle together with slide hammer for dent pulling, and is supplied in a rugged blow mould storage case. 

• Paintless dent removal using hand warmed 'cold glue'.
• Kit includes: 4 alloy glue adaptor pads, slide hammer, hand-pull handle and 50g of cold glue.
• No need for external heat source, gas or electrical power.
• Glue is easily removed by hand and can be reused if kept clean and free from grease. Replacement glue available, see Power-Tec Part No. 92646.
• Safe for use on all vehicle types including EV/Hybrid vehicles. No risk of voltage spikes (associated with traditional ‘welding’ repair methods).

Designed to extract and install the drive flange and wheel bearing on front and rear wheel drive vehicles where a one piece bearing is used. Use on driven axles only.

• Front and rear drive flange and wheel bearing removal.
• Front wheel drive applications include: Chrysler, Ford, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Nissan, Toyota and VAG.
• Rear wheel drive applications include: BMW, Mercedes-Benz and Porsche.
• Not suitable for fitting GEN2 bearing assemblies.
• The 7879 utilises a mechanical force screw - always apply molybdenum disulfide grease before use.

A master fuel pipe and connector kit, developed to allow the replacement or repair of the most common sizes of hard plastic fuel pipe and connectors found on modern vehicles. The kit enables the technician to produce an effective, professional repair that is in keeping with the OEM product. The kit contains male pipe connectors and female quick connectors in straight and angled formats as well as lengths of the relevant plastic pipe. Lengths of specially selected rubber fuel hose, pipe cutter and connectors plus twin ear clips are also included. This master kit also includes Laser Tools unique pipe connector insertion tool (Part No. 6933) secured in EVA foam in the base of the box, to ease the fitting of the hard plastic fuel pipe to the connectors. All contents from this kit are available separately.

• 10 different sized straight and 90° angled fuel line quick connectors for ID's: 6, 8 and 10mm (nylon pipe); 7.5 and 12mm (rubber hose); made to SAE J2044-2009 specifications. 5 sizes of straight male plastic pipe connectors for ID's: 6, 8, 10mm (nylon pipe); 7.5, 12mm (rubber hose). 2 double ended fuel line connectors for 6 or 8mm nylon pipe to 7.5mm rubber pipe.
• Connector constant running pressure: 5 bar (72psi); max pressure: 7 bar (101psi). Operating temperature: -40°C to 120°C. Always lubricate the connector with petroleum jelly or similar to assist assembly.
• 3 sizes of nylon pipes in 3 ID: 6, 8 and 10mm x 340mm long. 2 sizes of rubber hoses in 2 ID: 7.5 and 12mm x 200mm long. 2 sizes of twin ear O-clips to suit rubber hoses, for hose diameters: 15-18mm and 17-20mm.
• Pipe connector insertion tool (Part No. 6933), an innovatively designed hand operated force tool combined with specifically machined adaptors to clamp the relevant fuel pipe and fit the connector into the pipe, without requiring the use of hot water and significantly reducing the risk of damage to the connectors and seals. EU registered design, made in Sheffield.
• Stainless steel soft pipe cutter for use on for soft rubber hoses up to 35mm diameter.