MECACYL'S HY TECHNICAL Advantages :

• Offers Silence and suppleness
• Better gear changes
• Eliminates vibrations
• Protects against oxidation
• Reduces wear

WHY USE MÉCACYL HY?
Your transmission gets stuck, makes noise and you’d like to get that pleasure of supple and
silent driving back. Would you like peace of mind and safety and the ability to protect your
transmission for the next 80,000 km? Then, don’t think twice. HY is for you! It is perfectly
suitable for all hydraulic systems, assisted steering …

HOW MÉCACYL HY WORKS IN YOUR ENGINE
Mécacyl HY lubricates and changes the surface structure of metal in friction areas. The
inertia connected to friction is significantly reduced. This creates sliding instead of friction.
The movement between the pinions and, therefore, the gears becomes relieved and
quieter. In friction areas, HY sets in so the metal becomes more resistant to all types of
aggressions and that, along with the water-repellant features of Mécacyl hyper lubrification,
means your transmission will be protected from oxidation and the wear will significantly
drop.

EASY TO USE
4 to 5% of fluid; in other words, one 100 ml bottle for every 2-2.5 litres of oil in the transmission,
3% fluid in axles. Repeat every 80,000 km or 2-3 years.

MECACYL'S HJE TECHNICAL Advantage

• Clean combustion and injection
• Easier anti-pollution control
• Offers silence and suppleness
• Protects valves (E85, Gas... )
• Enable a change to non-leaded

WHY USE MÉCACYL HJE?
If your petrol vehicle gets sooted up or is sooted up and the technical inspection is fast
approaching, Mécacyl HJE is the answer you need! The benefits don’t stop there. Extraordinarily
lubricating like all Mécacyl products, Mécacyl HJE settles in and protects your
valves and injectors! The metal parts are shielded by the Mécacyl hyper lubrication to
become protected! And, if your vehicle runs on ethanol or gas or is a collector’s vehicle
originally meant to run on unleaded fuel, you’ll find the perfect ally in Mécacyl HJE to
protect your engine and bring you peace of mind at the same time.

HOW MÉCACYL HJE WORKS IN YOUR ENGINE.
In order to set in and change the surface structure of the metal, Mécacyl HJE removes
residue from burnt fuel, gum and other pollutants. This leads to clean carburetors and
injectors. It then works on the injectors, valves and metal parts under friction. Once the
metal structure changes, the injection and valves are shielded and better resist drying
fuels.

EASY TO USE
Mix Mécacyl HJE well in the fuel tank when refueling (respecting the dosage indicated in
the instructions). One 200 ml bottle every 15-20,000 km.

BY MECACYL TURBO SPECIAL CLEANER

In order to restore the Turbo to its full power and original operation, the special Turbo XL Mecacyl cleaner dissolves and removes soot and calamine deposited on the opening blades of the variable geometry Turbo. Our product will extend the life of your Turbo and reduce fuel consumption.

This treatment is particularly recommended if your vehicle is contraindicated for the use of Mecacyl HJD.

MECACYL'S CR TECHNICAL Advantages :

• Fuel efficiency (up to 15%)
• Less pollution
• Silence and suppleness
• Enhanced engine performance
• Engine protection

WHY USE MÉCACYL CR?
Just about everyone would like to reduce their fuel consumption by up to 15%, contribute
to a healthy environment by polluting less, have a better performing and quieter car with
slower engine wear... If you’re one of them, then don’t wait any longer and use Mécacyl
CR now.

HOW MÉCACYL CR WORKS IN YOUR ENGINE
Mécacyl CR lubricates and changes the surface structure of metal in friction areas. This
creates sliding instead of friction. By creating sliding instead of friction, the inertia connected
to friction is significantly reduced.
As soon as it’s used, Mécacyl CR begins removing residue from burnt oil, gum and
moisture. The engine becomes relieved and water-free. CR works in the friction areas. The
metal becomes more resistant and slippery for silence and suppleness. The oil is protected
in the friction area, it cools better and the combustion is nearly perfect with lower CO/CO2
pollution. You get more toque power and fuel de efficiency…

EASY TO USE
Add Mécacyl CR directly into the oil tank (on average 1 bottle for 4 to 5 litres of oil. see
instructions for use) upon an oil change or 3,000 km after one. To be used with each oil
change. Ideally in a hot engine. Best results are seen after 2 to 3 uses.

MECACYL'S HY TECHNICAL Advantages :

• Offers Silence and suppleness
• Better gear changes
• Eliminates vibrations
• Protects against oxidation
• Reduces wear

WHY USE MÉCACYL HY?
Your transmission gets stuck, makes noise and you’d like to get that pleasure of supple and
silent driving back. Would you like peace of mind and safety and the ability to protect your
transmission for the next 80,000 km? Then, don’t think twice. HY is for you! It is perfectly
suitable for all hydraulic systems, assisted steering …

HOW MÉCACYL HY WORKS IN YOUR ENGINE
Mécacyl HY lubricates and changes the surface structure of metal in friction areas. The
inertia connected to friction is significantly reduced. This creates sliding instead of friction.
The movement between the pinions and, therefore, the gears becomes relieved and
quieter. In friction areas, HY sets in so the metal becomes more resistant to all types of
aggressions and that, along with the water-repellant features of Mécacyl hyper lubrification,
means your transmission will be protected from oxidation and the wear will significantly
drop.

EASY TO USE
4 to 5% of fluid; in other words, one 100 ml bottle for every 2-2.5 litres of oil in the transmission,
3% fluid in axles. Repeat every 80,000 km or 2-3 years.

MECACYL'S HJE TECHNICAL Advantage

• Clean combustion and injection
• Easier anti-pollution control
• Offers silence and suppleness
• Protects valves (E85, Gas... )
• Enable a change to non-leaded

WHY USE MÉCACYL HJE?
If your petrol vehicle gets sooted up or is sooted up and the technical inspection is fast
approaching, Mécacyl HJE is the answer you need! The benefits don’t stop there. Extraordinarily
lubricating like all Mécacyl products, Mécacyl HJE settles in and protects your
valves and injectors! The metal parts are shielded by the Mécacyl hyper lubrication to
become protected! And, if your vehicle runs on ethanol or gas or is a collector’s vehicle
originally meant to run on unleaded fuel, you’ll find the perfect ally in Mécacyl HJE to
protect your engine and bring you peace of mind at the same time.

HOW MÉCACYL HJE WORKS IN YOUR ENGINE.
In order to set in and change the surface structure of the metal, Mécacyl HJE removes
residue from burnt fuel, gum and other pollutants. This leads to clean carburetors and
injectors. It then works on the injectors, valves and metal parts under friction. Once the
metal structure changes, the injection and valves are shielded and better resist drying
fuels.

EASY TO USE
Mix Mécacyl HJE well in the fuel tank when refueling (respecting the dosage indicated in
the instructions). One 200 ml bottle every 15-20,000 km.

BY MECACYL TURBO SPECIAL CLEANER

In order to restore the Turbo to its full power and original operation, the special Turbo XL Mecacyl cleaner dissolves and removes soot and calamine deposited on the opening blades of the variable geometry Turbo. Our product will extend the life of your Turbo and reduce fuel consumption.

This treatment is particularly recommended if your vehicle is contraindicated for the use of Mecacyl HJD.