REDATS M-221-3D1 - essential info about it:
Recommend this unit to customers who look for:

• an automatic tyre changer - it saves operators’ time
• a tyre changer for car and van wheels - up to 24” (internal clamping) and 21” (external)
• tyre changer ready for RUNFLAT/low-profile tyres (arm in standard)
• unit powered with 3-phase (400V)
• powerful tyre changer: bead breaker force 2500 KG

Who is it for?
This is a perfect choice for a main unit at any tyre shop. It is able to deal with wheels up to 24”. It is automatic so it saves operators’ time. 

RUNFLAT tyres are no challenge
Runflat/low-profile tyres are a standard these days. Tyre professionals or mechanics don’t want to waste time working on them manually. An arm for RUNFLAT/low profile is just essential today.

Perfect for demanding customers 

Working comfort
This tyre changer was designed to make the daily work much easier - the head can be regulated and inserted into one of two sockets. There are also spacy shelves for the accessories that you need in your daily work - so, the operator will have them all at hand!

Third hand in standard
The tyre changer by REDATS is equipped with the third hand - it blocks the parts of the tyre bead below the rim edge, which means a much easier work while demounting tyres. Using the third hand is very easy - there is the "up-down’ joystick.

Easy tyre demounting
Thanks to roll and a round ending of the assistant arm, demounting the tyre is even easier than ever.

Application
This tyre changer is designed for work with tyres of passenger cars. Thanks to the assistant arm, it could also be used for low-profile or run-flat tyres.

Unit ready for operation
This tyre changer comes with all the accessories essential for daily operation:

• filtering-greasing unit: oiler + water separator
• tyre inflation gun
• plastic overlays for duckhead (roller and protector)
• plastic overlays for jaws - 4 pcs
• tyre lever
• accessories bucket
• 3D1 arm (roller, plate, centering cone)
• the tyre changer can be upgraded with a LEVERLESS arm (to be purchased separately)

Lift specifications for your clients
This automatic two post lift will be a great support for your clients working with:

• passenger cars
• delivery vans

It is perfect for working with the suspension or engine removal. 

This lift

• saves your clients’ time - it is automatic, so no need to run from one post to another
• will raise passenger cars and light vans - capacity 4000 kg
• will enable your clients to work with wider cars: max. car width is 2500 mm
• will provide your clients with working comfort - even those who are tall - it raises up to 193 cm

 Quick facts to share with your clients

• Max. capacity: 4 tons
• Type: automatic
• Arm length scope: 700-1345 mm
• Floor thickness: 30 cm
• Beam: lower
• Power source: 400V
• Max. car width: 2500 mm
• Raising height: 9-193 cm
• Post base dimensions: 380 x 450 mm
• Reinforcing frame: no
• Weight: 610 kg
• Dimensions (width x height) 3365 x 2824 mm

Below - arm setting scope, width, height and other useful data!

Are REDATS lifts durable?
Yes.

WHAT DOES THAT MEAN TO YOUR CLIENTS?
Get to know the facts

• rope covers - they protect the ropes, chain, actuators from dust or dirt 
• chain cover - against mechanical damage
• shoes - they provide trouble-free operation of the raising parts.

reliability = solutions that let your clients work for years, without problems. Every issue means having to pause the operation = money lost! 

Symmetric arms  
This lift comes with symmetric arms  - length 700-1345 mm.

Simple work
Your clients will quickly learn how to use the lift - to raise, it takes simple pushing the (UP) button. To decrease it, it takes the lowering button (DOWN).

Quick and easy, right? It also comes with the emergency lowering feature, in case of a blackout. 

Trouble-free use for years
Durable chain and perfect part quality mean trouble-free use for many years. Reliability that your clients can trust. 

REDATS L-520 - facts to tell your clients!
Your customers will enjoy it for:

• mobile lift - YES
• max. capacity: 3000 kg
• time to raise/lower: 25 seconds
• Platform length (without runways): 1400 mm
• Platform length (with runways): 2030 mm
• total width: 1880 mm
• Max lifting height: 620 mm
• Base height: 100 mm
• cars it may raise: passenger cars, SUVs, crossovers, etc.
• Power source: 230V (3 phase)

Why introduce this into your offer?
It is a great choice for your customers looking for a mobile car lift. It comes with casters, so moving around is easy. 

It is great for anyone looking for a lift that takes very little space.

It is great for tyre jobs. And other jobs including the lower parts of the car.

What platform length?
The platform length (the spot to put the rubber parts at) is 140 cm

Low-clearance cars are not a problem!
REDATS L-520 is able to work on low-clearance cars. In the basic setting it has 10 cm only. 

Easy to drive onto!  
Runways with special grooves make it easier to drive a car onto it - even when they are dirty or wet. 

Easy operation
There is a separate control panel, thanks to which the operator can easily switch between various options. Every function has its own button.

Wide application
With the lifting capacity of 2,5 tons, you can easily work with all passenger and light commercial vehicles!

Little space taken
If you are looking to save some space in your tyre or car service, getting a scissor lift is a great idea. It takes very little place, so that it fits any interior!

Trouble-free installation
The lift is good for use from the very moment you install it at your place. All it takes is position the lift on the ground and connect with the power source.

Reliability you can trust
Top-quality materials and reliable mechanical parts mean that the lift is fit for use throughout many years.

What is that balancer for?
REDATS W-680 is an automatic wheel balancer for wheels of cars and car-derived vans. It might be used for dealing with wheels that meet the following parameters:

• rim diameter 10” - 24” (256mm~610mm)
• max. wheel weight: 65 kg

Is it a good idea to get an automatic balancer?
You don’t have to enter rim data manually. This balancer reads it out for you. So you won’t have to waste time on that!

Fully-loaded balancer
This balancer comes with loads of functions that make it easier to work with every wheel:

• 9 balancing programs
• SPLIT function (dividing weight into smaller ones)
• rim-tyre positioning
• easy-to-read interface

Saves operators’ time
The balancing cycle takes 8 seconds only. Yes, it takes so short to balance a wheel. This means, the REDATS W-680 balancer is a huge time-saver!

REDATS W-680 - technical datasheet

Here’s the most important information to tell your clients about this balancer: 

• Type: Automatic
• Rim diameter: 10" - 24"
• Rim width: 1,5" - 20"
• Application: cars and car-derived vans
• Power source: 230V 50Hz
• Hidden weight program: YES
• ALU wheel programs: 9
• Auto-ALU (choosing the spot for adhering weights): yes
• Voice synthesizer: no
• Max wheel weight: 65 kg
• Measuring cycle time: 8 seconds
• Shaft diameter: 40mm (diameter) x 3mm (thread pitch)

 When to recommend this balancer to your clients?

This is a perfect balancer for your customers that want

•  main unit for their tyre shop
• automatic unit able to save their time
• unit able to deal with larger wheels: rim to 24” (diameter) and 20” (width)
• unit for cars and larger vans

Nine balancing programs
The wheel balancer REDATS W-680 provides a quick operation with every wheel. By default, it has 9 balancing programs.

Imbalance optimisation
Trouble balancing wheels (the imbalance exceeds 50 g)? This wheel balancer quickly solves the problem. Just use the OPT function - the balancer shows the points against which you have to rotate the tyre on the rim to decrease the imbalance mass.