HRW 22 Alloy Wheel CNC Diamond Cut Machine repairs broken, cracked or scratched rims affected by accidents, bad road conditions and long-term use.

CNC Alloy wheel Diamond Cut Machines transfer the surface of the rim form to the computer system with 0.002 mm precision with very sensitive ruby ​​probes.
Measurement time is between 1 and 4 minutes.

This form is filtered by the machine's internal software. After the reading process, 0.2 mm of chip is removed from the surface with a diamond tip. The surface obtained at the end of the Cnc Wheel Turning process is shiny.

When performing machining, it should be taken into consideration whether the rim has been repaired before. A picture of the repaired rim, license plate, customer name and the camera included with the machine is taken and recorded in the machine memory.

TORNADO CNC chassis pulling machine system is the name given to the equipment that helps the body structure with the pulling method. Chassis pulling usually occurs during maintenance of damage following an accident.

WRM 26 Alloy Wheel CNC Diamond Cut  Machine repairs broken, cracked or scratched rims affected by accidents, bad road conditions and long-term use.

CNC Alloy wheel Diamond Cut Machines transfer the surface of the rim form to the computer system with 0.002 mm precision with very sensitive ruby ​​probes.
Measurement time is between 1 and 4 minutes.

This form is filtered by the machine's internal software. After the reading process, 0.2 mm of chip is removed from the surface with a diamond tip. The surface obtained at the end of the Cnc Wheel Turning process is shiny.

When performing machining, it should be taken into consideration whether the rim has been repaired before. A picture of the repaired rim, license plate, customer name and the camera included with the machine is taken and recorded in the machine memory.

Electrostatic powder coating is a solvent-free surface coating method.

Coating material is very fine powder paint particles that form the final coat of paint. Powder paint is applied in the paint booth using special paint guns. The powder paint particles, which are electrostatically charged while passing through the gun, adhere to the material to be painted in the cabin and the coating process is completed. In order for the powder paint to fully adhere to the material surface, the material must be ground very well.

After the material is coated with powder paint, it enters the baking oven. The oven temperature of 200˚C ensures that the powder paint melts and sticks to the material. The result is a very durable, economical, environmentally friendly, wide color range and glossy surface coating.