Miracle adhesive technology: really powerful stuff The adhesive technology sets new standards in the car body repair and is a game changer for steel and aluminium repairs. Aluminium Repair The adhesive technology perfectly complements the new MIRACLE AluRepair solutions. Due to large contact area, round deformations without body edges are pulled into their original shape easily. The adhesive technique removes 60-70% of deformation in an extremely short time. The adhesive kit does usually pay back the investment in the repair of the first damage. With the new MIRACLE adhesive technology, with the first pull, you eliminate, without damaging the paint, easily 60-70% of deformation.

• Extremely fast and profitable repair
• Optimal recovery at round surfaces without body edges.
• Less work in the paint preparation. • No heat input into the material.
• Highly compatible with MIRACLE system. All MIRACLE components can be used without restriction
• Optimal for II / III cars and commercial vehicles segment
• Reusable adhesive pads in different sizes and two degrees of hardness
• Suitable for steel sheets and aluminum bodies

AluRepair has completely changed the way Aluminum panels are being repaired today. The absolutely safe process enables you to weld Alu-Bits fast and reliably. Subsequently you can use the CBR tools to remove the deformation and to finish the surface.

AluRepair VISAR is the only solution for high-quality repairs of aluminum panels and hang-on parts. The process-safe system can be used to weld Alu-Bits for dent removal, to weld studs in steel and aluminum, aluminum ground studs and extractor studs for the removal of punch rivets.

The Carbon AlurepairVISAR has been awarded with the German state prize for innovation of the trade.

CMA-1200 AluRepair VISAR

The paintless dent repair (PDR) is a recognized method for the repair of dents and dings. The application range is extremely versatile. In body and paint shops and in garages this technology has proven effective for economic and quick removal of parking accidents, hail damage, stone chips, etc. and is successfully used in paint preparation.

NEW: large LED dent light, height adjustable up to 2.2 m with 3 LED strips (2x white, in the middle yellow) V, 12 V vehicle plug and 230 power supply

• Profitable elimination of parking, hail, chestnut and transport damage.
• High cost and time savings in paint preparation.
• The original paint is preserved. No visual differences as possible when painting.
• Durable PDR tools "Made-in-Germany" from the highest quality tempered steel.
• Worldwide, over 200,000 sold PDR tools in use at automotive manufacturers and professional users.
• Absolute professional quality with full warranty.
• CARBON PDR tools are of course "Made-in-Germany" and are manufactured exclusively at tooling specialist Carl Walter for us.
• Besides the tools and well-designed accessories CARBON provides nationwide regular hands-on training courses and seminars

“Repair – not Replace”. The Miracle-System is the leading solution for the repair of damages on car body panels. It enables you to achieve perfect, quality repairs and to work highly profitable.

With 12 pulling tools and more than 500 accessories, the Miracle-System offers the most flexible and complete car body repair workplace on the market. It is the main base for all repairs on steel and aluminum panels.

Scope of delivery CM-019:

• MS-17S Strong-Puller
• MS-38L2 Line-Puller 1600
• MS-10z Easy-Puller
• MS-13R Lever-Puller
• ONA-01 Zughammer
• ONA-02 Hand Puller
• MHSG-03 Hammer (330 g)
• MHS-01 Hammer (555 g / horizontal peen)
• MHV-01 Hammer (555 g / vertical peen)
• SMS-7Q Stud Welder (CE)
• MB-2 MIRACLE Bits, S (2x 110 pcs)
• MB-3 MIRACLE Bits,rotated (2x 110 pcs)
• M-01 Welding tip •CM-029 MIRACLE System trolley
• CM-023 Paint removal kit
• CM-024 Bit-Cutter
• CM-060 Small accessoris kit
• CM-025 Pulling rods set Ø 7 mm
• CM-026 Pulling rods Ø 8 mm
• CM-040 Gluing Kit for Easy Puller
• CM-070 Marketing-Package

Miracle adhesive technology: really powerful stuff The adhesive technology sets new standards in the car body repair and is a game changer for steel and aluminium repairs. Aluminium Repair The adhesive technology perfectly complements the new MIRACLE AluRepair solutions. Due to large contact area, round deformations without body edges are pulled into their original shape easily. The adhesive technique removes 60-70% of deformation in an extremely short time. The adhesive kit does usually pay back the investment in the repair of the first damage. With the new MIRACLE adhesive technology, with the first pull, you eliminate, without damaging the paint, easily 60-70% of deformation.

• Extremely fast and profitable repair
• Optimal recovery at round surfaces without body edges.
• Less work in the paint preparation. • No heat input into the material.
• Highly compatible with MIRACLE system. All MIRACLE components can be used without restriction
• Optimal for II / III cars and commercial vehicles segment
• Reusable adhesive pads in different sizes and two degrees of hardness
• Suitable for steel sheets and aluminum bodies

AluRepair has completely changed the way Aluminum panels are being repaired today. The absolutely safe process enables you to weld Alu-Bits fast and reliably. Subsequently you can use the CBR tools to remove the deformation and to finish the surface.

AluRepair VISAR is the only solution for high-quality repairs of aluminum panels and hang-on parts. The process-safe system can be used to weld Alu-Bits for dent removal, to weld studs in steel and aluminum, aluminum ground studs and extractor studs for the removal of punch rivets.

The Carbon AlurepairVISAR has been awarded with the German state prize for innovation of the trade.

CMA-1200 AluRepair VISAR

The paintless dent repair (PDR) is a recognized method for the repair of dents and dings. The application range is extremely versatile. In body and paint shops and in garages this technology has proven effective for economic and quick removal of parking accidents, hail damage, stone chips, etc. and is successfully used in paint preparation.

NEW: large LED dent light, height adjustable up to 2.2 m with 3 LED strips (2x white, in the middle yellow) V, 12 V vehicle plug and 230 power supply

• Profitable elimination of parking, hail, chestnut and transport damage.
• High cost and time savings in paint preparation.
• The original paint is preserved. No visual differences as possible when painting.
• Durable PDR tools "Made-in-Germany" from the highest quality tempered steel.
• Worldwide, over 200,000 sold PDR tools in use at automotive manufacturers and professional users.
• Absolute professional quality with full warranty.
• CARBON PDR tools are of course "Made-in-Germany" and are manufactured exclusively at tooling specialist Carl Walter for us.
• Besides the tools and well-designed accessories CARBON provides nationwide regular hands-on training courses and seminars