Hubitools S.A.

Über uns
With over 40 years’ experience of selling innovative tools in the fields of specialized mechanics, diagnostic and control, inspection, electronic testing and marking, the Belgian company Hubitools has become a key partner in the automotive and industrial repair business.
For a couple of years now, we have been designing and developing our own “Hubitools Design Products”. Those tools are thought for technicians to help them with the current issues they are facing with modern vehicles. Besides our own patented products, we are the long-term exclusive European distributor of several worldwide quality tools manufacturers. We also have a strong relationship with suppliers all over the world, improving and adapting their products to our market, making them exclusive items too.
Mehr über uns
Special Interests

Downloads
Keywords
- Special tools
- Diagnostic tools
- Brake bleeder
- Suspension tools
- Videoscope
Unsere Produkte

THE ULTIMATE AUTOMOTIVE TESTER KIT
SCOPE + (HU31025)
- Solely designed for automotive electrical circuit’s troubleshooting.
- Easy and simple to use, no extensive electrical knowledge needed.
- Fully protected. It will not cause damage, even accidentally using OHM measurement to measure Volts.
Measures:
- Amps draw (mini, ATC or maxi) without removing the fuses from the fuse box
- Voltage (max. 50 VDC)
- Cranking volts with auto HOLD function
- Resistance [Ohms] (from 0.0 Ω up to 1.0 MΩ)
- Frequency with peak to peak volts (up to 20 KHz)
- Duty cycle (%)
- Continuity test + Diode/ LED test
_____________________________________________________________________
SENSOR SIMULATOR (HU31035)
The ideal tool to simulate and actuate the output signal from automotive sensors : frequency, voltage and test sequences
- It will help you in your diagnostic when scan tool diagnosis ends. Sensors, injector actuators will inform the scan tools that there is a problem, but the sensor simulator will allow the technician to know if the faulty operation is a faulty sensor, a problem in the car computer, a defect in the wiring, etc.
- The device is specially used for wiring tests. It can simulate the correct signal and compare it to the scan tool.
- Allows you to eliminate the need to replace sensors that work perfectly fine (investment quickly pays for itself).
Simulator functions
1. Simulated resistance
2. Simulated voltage
3. Simulated sine wave
4. Simulated square wave
5. Simulated temperature coefficient sensors:
6. Simulated throttle & pedal sensor sequences
7. Oxygen sensor : testing mode and simulated mode - You can simulate most sensors, injectors or actuator as ABS sensor, lambda sensor, EGR sensor, CKP sensor, knock sensor, map sensor
- To be used in combination with the HU31025 Scope +

ARTICULATED VIDEOSCOPE 2 WAYS 3,9 mm (HU23155)
The high end automotive diagnostic videoscope !
Thin ⌀3,9mm and 2 ways, 180° articulated camera to get the best possible view in the tightestareas.
Snaps pictures, records movies for traceability and customer proof or oem warrantyclaims.
- 3,9mm diameter, 2 ways articulated probe
- 6 leds – 3 adjustables levels of brightness
- 5’’ detachable screen with 1280 x 1080 pixels resolution
- Temperature displayed on screen
- Rechargeable 5Ah - 3,7V Li-Ion Battery
- Depth of optimal sharpness : 20 to 80mm
- Camera angle of view : 80°
- 2A – 5V charging plug, usb to usb-c cable and 32gb memory card included
- Digital signal 2 mega pixel lens
- Image rotation function, with photo and video storage function
- The screen can be rotated 90 degrees from left to right, suitable for left-handed operation
- The screen can be tilted back or forward for viewing from different angles

ELECTRONIC BRAKE PRO BLEEDER (HU11030 & HU11035)
Hubitools reinvents the brake bleeder !
Professional brake bleeder available in 2 configurations, 3 possible power supply modes, fully electronically managed and designed with one goal : reliability and robustness.
- LCD color screen and user-friendly 4 button touch panel
- Bleeding with adjustment from vacuum 0,5 bar to,pressure 4,5 bar
- Automatic leveling of the master cylinder’s reservoir
- 5 languages
- Psi and bar
- Automatic stop when the new DOT drum/can is empty
- Many safety functions such as automatic stop when the bleeder detects an abnormal pressure
- Works for brake and clutch bleeding
- Pulsating pressure
- Interchangeable drum/dan and flushing mode for different DOT use
- Flexible length : 5 m
- Includes EU standard master cylinder cap adaptor
- Includes old fluid retreiving bottle with nip adapter and chain
What makes it different ?
- Uses a EU made high quality gear pump
- Clever managment of the hydraulic system thanks to the specific software, making it highly reliable
- One-piece hydraulic system without return line
- Robust design with quality material to withstand tough garage environment
- Versatile (configuration – power supply – capacity...)
Configurations:
- HU11030: Portable version up to 20 L
- HU11035: On trolley version up to 60 L
Also available :
- HU11036: Trolley only (to upgrade the portable version to on trolley version)

The complete range for Diesel engines
VIBROSHOCK® (HU41045)
- Vibroshock® is the ideal tool to untighten frozen screws, nuts or glow plugs without any damage.
- This kit must be used with an Air-hammer mounted with a pressure regulator (not included)
- Patent registered
APPLICATIONS:
- Brake screws
- Exhaust screws
- Rounded lugs
- Glow plugs
- Clamp-on injectors
- ...
THE KIT INCLUDES:
- 1 x Vibro-shaft 3/8” square drive
- 1 x Articulated wrench
- Special Impact Sockets with internal edge 8, 9, 10, 11, 12, 13, 14mm
The goal of the HU41045 Vibroshock® is to avoid any breakage due to an excessive torque or an impact. It is what happens the most often when you use an impact wrench on small diameter screws, bolts, threads.
The Vibroshock® creates an axial vibration that brakes the welding between the female and male thread applying in the same time a controlled torque to untight the frozen assembly avoiding the risk of breakage.
VIBROSHOCK® VS IMPACT WRENCH
The Vibroshock® and the impact wrench have totally different ways of functioning:
- The impact wrench generates rotation impacts on the complete mechanical assembly itself.
- The Vibroshock® generates axial vibration and controlled torque. This difference while dismounting a frozen assembly is very important as from one side the impact wrench will only create impacts on the rotation (with the risk of breakage) and from the other side the Vibroshock® will “thanks to the vibration” liberate the play between the threads allowing to unscrew the frozen assembly without risk of breakage. Vibration will also definitely help penetrating oil to get in. As an example, if you use the impact wrench on an 8 mm glow plug, It will take 2 sec and the glow plug will be broken in the cylinder head. The Vibroshock® will take it out easily.
__________________________________________________________________________
UNIVERSAL GLOW PLUG TIPS PULLER M8, M9 & M10 (HU41050)
- Enables broken glow plug tips stuck in the cylinder head to be easily removed
- The kit comprises 4 easily identifiable guides
- The tap, drill bit and extractor holders are fitted to the body of the original plug and slide in instead for perfect centering
- Self-centering industrial taps
- The size of the drill bits and the shoulder of their holder prevents any risk of drilling or tapping too far into the cylinder head without prior measurement
- In the event of the tips being flared in the cylinder head, the kit has an ejector that enables the tip to be pushed back into the cylinder before retrieving it with the appropriate magnet included in the kit.
__________________________________________________________________________
UNIVERSAL DIESEL GLOW PLUG PULLER (HU41051)
- Minimal space needed for use : ideal when glow plug compartment is not easily reachable
- Enables glow plugs broken in the top of the cylinder head to be easily removed without any damage
- Usable in narrow engine bay and engine with glow plugs on the firewall’s side
- High quality material for professional use!
- Unique design of Electrode puller to tear out the longest part of the electrode as possible
- Some Vehicles are equipped with ceramic glow plugs. This tool is not suitable for this type of glow plug ( see manufacturer's data).
Easy to use :
- The kit comprises 1 electrode puller and 1 electrode reinforced drill with 2 guides
- It comprises 2 special centered mills with one mill support that prevent any damage to the head
- A tap and a slide-hammer extractor to pull out the broken glow plug
- 3 refreshing taps : M8, M10 x 100 & M10 x 125 with hex drive to be used with any ratchet and self centering feature
__________________________________________________________________________
GLOW PLUG THREAD REPAIR KIT M8, M9, M10X100, M10X125 (HU41058)
This kit is designed to repair the engine glow plug threads M8, M9, M10 x 100 & M10 x 125 quickly, professionally and permanently. It fits perfectly modern vehicles with very little space and access to glow plugs.
- Each tool (reamers & Taps) is self guided
- No need for glue or thread seal
- Ream, tap and replace
The kit includes:
- 2 cylinder head reamers: 9mm and 11mm
- 4 special taps 4 mounting tools
- 4 spare thread repair inserts of each size M8 (short & long) ; M9; M10 x 100; M10 x 125
__________________________________________________________________________
UNIVERSAL INJECTOR PULLER (HU41055)
- Single universal kit that enables all types of moderately frozen or caked injectors to be removed without removing the electrical part, even on the latest vehicles.
- For Denso, Siemens Bosch and Delphi common rail or piezo injectors from 1999 to 2017
- Avoids having to remove the electrical part of the injector and thus avoid significant additional costs due to an extremely strong threaded shaft of the same size as the diesel oil inlet coupling to which the extractor is attached
- The kit also includes two couplings (M12 and M14) in the event that the original coupling cannot be removed
- 2 ways of extracting the injector:
- by rotating (handle)
- by rotating AND axial extraction (mass to inertia) in the most difficult cases
__________________________________________________________________________
DIESEL INJECTOR SEAL EXTRACTOR (HU41010)
- Removal of a Diesel injector seal that is completely clogged and stuck in the housing
- Slide hammer 1000 grams to remove the most difficult seals
- Integrated hexagonal socket in the slide hammer to screw the extractor into the seal (left-handed thread)
- Conical remover with double thread entry
- Provided with two removers: one for light vehicles (LV) and the other for light utility vehicles (LUV)
- No risk of parts dropping into the cylinder
- No adjustment
- Very easy to use
- Very quick
- High quality equipment for professional use
__________________________________________________________________________
UNIVERSAL INJECTOR SEAT CLEANING SET (HU41039)
This set will allow the technician to make a perfect job before placing the new injector!
Cleaning the injectors holes after the extraction is extremely important.
The kit includes :
- 2 metal brushes Ø 20 mm and 25 mm for injector hole cleaning
- 2 front brushes for injector seat cleaning
- 1 front brush extension
- 2 seal plugs to close the injector hole while cleaning
- 1 seal plug holder to place and remove the plug
- 1 sanding kit (paper and paper support)

ARTICULATED STRUT LIFTER (HU43025)
Works on electric vehicles (Tesla, Zoe, Leaf, Hyundai, Kia, etc.).
Ideal for modern vehicles with double triangulation.
- Supports the strut on the vehicle: 500 kg
- To be mounted on 30 mm hydraulic transmission
- POM (polyoxymethylene) clamping jaws to avoid damage to the strut. 3 sizes of jaws (light vehicle, light commercial vehicle, rear shock absorbers)
- Depth and tilt adjustment
Ideal for the following operations :
- Removal and installation of struts
- Removal and installation of drive shaft
- Removal and installation of arms and hub ball joint separation
- 100% safe work
- Operator has both hands free to work safely
No risk of damage to parts as :
- Sensors
- Wiring harness
- Plastic protection, body
Security :
- Once the tool is placed, the operator has both hands free to work safely.
- The tool supports up to 500 kg of pressure
Productivity :
- The tool is placed in less than a minute
- Dismantling of a strut in 7 to 8 minutes
- No risk of damage to mechanical parts or bodywork
Creativity :
- Patented tool
- Axial adjustment in 5 positions
- 120° articulation to respect the geometry of the suspension