USE OF

1- When starting the process, the engine temperature should be 70-80 degrees.
2- The heat probe sensor on the particle filter is removed and the appropriate apparatus next to the device is installed.
3- The blue test hose on the device is attached. Vehicle speed is kept constant at 2000-3000 rpm. The first test valve on the device is closed. It fixes the pressure ratio.
4- Washing hose is attached to the apparatus. The 1st Start button opens and the cleaning process begins. The device generally performs the washing and rinsing operations on its own. After the washing starts, the vehicle is kept constant at 2500-3000 rpm until the process is completed.
5- After the washing and rinsing process is completed, the vehicle is run for another 5 minutes and the process is completed.
6- Washing the hose, the blue test hose is reattached. As in the first test, the vehicle is kept constant at 2000-3000 rpm. The second test valve is closed and the pressure ratio between test 1 set and test 2 set is displayed.
7- The probe sensor is cleaned and installed

Our device performs the general heavy vehicle, light commercial and automobile DPF Particle and Cartalizer cleaning request. Our device has a large reservoir with high water pressure and air drying. The cleaning council provides DPF testing and reporting. The operating panel of our machine is completely ajital, it clearly reflects the congestion rates from the digital screen to the screen during the DPF test stage.

General Characteristics and Benefits

CE certifell and 2 years warranty

Cleans the heating pad without removing it from the in-car glove compartment tab.

Cleans the car without removing the radiator in the car group.

Intercool cleans up

It cleans the in-cylinder water channels without dismantling them.

It prevents summer fever.

It provides early heating of the vehicle and the heater in winter.

10 saves fuel

Removing dirt and sediment from the engine water channels extends the life of the engine.

LPG-CNG regulatór allows you to clean

Your solution partner in all water channels of the vehicle.

One 300 milliliter hr cleaning water is used for each application.