Can Data Logger is a dual channel device which allows logging Can signals on microSD card in real time. It supports both 29-bit and 11-bit CAN identifiers and ISO 15765 protocols. Additionally high quality processor (200 MHz) guarantees minimum consumption of power and optimum performance.
   

Basic functions of Can Data Logger are:
Ability to logging to two CAN-BUS channels in real time with CAN-Gateway function
CAN-BUS signal generating such as Ignition, RPM, speed, switches (for programming, testing ECU’s outside car).
CAN-BUS messages modification,  filtering.
CAN-BUS signal converting (for programming, testing ECU’s outside car).

Can Data Logger description:
CANGateway function - converting CAN signals with different speeds.
CAN-BUS Logging frames from two channels with same or different speeds.
Filtering CAN-BUS frames according to script.txt file.
Generating CAN-BUS frames according to script.txt file.
Modification of CAN-BUS frames according to script.txt file.
Electronic CAN-BUS termination resistors.
Power supply - 5 Volts or 12 Volts.
Software update using microSD card.
Possibility of modification and configuration via PC tool - CanGateway Manager.
No loss of any CAN- BUS frames when logging into two channels at the same time, with maximum speed.

DiagProg5 diagnostic tester is the latest generation device from the most popular DiagProg series that offers flexibility and comfort while maintaining ease of use.

This innovative equipment includes the ELP5 PRO - VCI and an intelligent Android tablet running our amazing DiagProg5 software.

DiagProg5 allows to read and erase OBD system errors DTC’s, reset engine oil inspections, and clear accidents. It can also easily work with various EEPROM chips and FLASH memories.

DiagProg5 functions:

• Reading and erasing Diagnostic Trouble Codes (DTCs) via OBDII.
• Reading and programming FLASH memory via OBDII.
• Reading and writing EEPROM memory via diagnostic connection.
• Vehicle modules repair.
• Engine oil inspection reset.
• Testing and adjusting instrument cluster’s indications.
• Testing of electronic modules by diagnostic way.
• Programming electronic modules after repair, replacement or accidents.
• Clearing (erasing) accidents data.
• Reading and erasing of advanced service history.
• Programming of immobilizers, keys and remotes.
• Motohours inspection.
• Coding of additional features in the vehicle.
• Language alteration for dashboard and other modules.
  
  

DiagProg5 software running on Android system inherits all technology and diagnostic advantages from the previous DiagProg4. It features an intuitive interface and extensive vehicle coverage, significantly enhancing the diagnostic process for automotive professionals. Regular updates ensure compatibility with new vehicle models and the latest diagnostic protocols.
This software package makes the DiagProg5 a powerful, versatile, and reliable tool for precise vehicle diagnostics.

Supported modules:
BDC, FEM, EZS, BSI, BCM, IC, SRI, ABS/ESP, AIRBAG, CEM/DIM, ZGW, GATEWAY, ECU/ECM/EDC, IMMOBILIZER

DiagProg5 is a highly sought-after tool in the automotive industry, known for its advanced capabilities and comprehensive support for a wide range of vehicles.

Combination of the ELP5 PRO - VCI and the cutting-edge software, solidifies its position as the leader in automotive diagnostics and programming.

DiagProg5 benefits:
Extensive Vehicle Coverage
Supports more than 7000 vehicle modules, ensuring compatibility with a vast array of car makes and models.

OBDII Programming
Vehicles are programmed via the diagnostic plug
(OBDII), allowing straightforward and efficient connectivity.

Convenient Software Updates
Software updates are possible via WiFi or USB 2.0,
allowing easy and quick updates to the latest features and vehicle modules.

Dedicated Support Platform
DiagProg5 offers a dedicated support platform for easy and fast technical assistance, ensuring users get help when they need it.

ELP5 PRO - VCI included
Allows easy, fast and reliable diagnostics, flashing and other complex programming operations.

Powerful Software
The enhanced processing speed and user interface lead to quicker diagnostics and programming increasing overall productivity.

Support in 8 languages: PL, EN, DE, FR, ES, IT, BR, PT.

ECU File Database Access
Provides online access to an extensive ECU file database, ensuring users have the latest and most accurate information.

Professional Guarantee and Service
DiagProg5 comes with a 24-months guarantee and professional service during and after the warranty period, providing peace of mind to users.

We offer a variety of DiagProg5 packages tailored to meet the specific needs of our customers and the markets they operate on.

With flexible options, customers can select the right set of features that best suit their requirements, enabling effective and precise vehicle diagnostics. Package Premium is the top-tier variant of DiagProg5, designed for professionals who demand the highest level of functionality and coverage. This package supports the most extensive range of vehicle modules, providing comprehensive diagnostics across a wide variety of makes and models.

List of DiagProg5 packages:
PACKAGE PREMIUM
PACKAGE OBDII
PACKAGE OBDII LITE
PACKAGE AUDI/SEAT/SKODA/VW
PACKAGE BMW
PACKAGE MERCEDES
PACKAGE MERCEDES SLIM
PACKAGE FORD
PACKAGE JAPAN
PACKAGE RENAULT
PACKAGE C12 CLIP
PACKAGE PERSONAL
PACKAGE GM/FORD/CHRYSLER – USA
PACKAGE USA

Each DP5 Package includes:

1. ELP5 PRO – VCI Vehicle Communication Interface

2. Tablet LT800 with the DiagProg5 Software

3. Set of organizers with cables and other accessories/ contents of the organizers depend on selected DiagProg5 package/

ELP5 PRO - VCI is a state-of-the-art Interface made to link a host PC/Android based device with a vehicle’s diagnostic connector.

This incredible VCI allows fast and reliable diagnostics, flashing and other complex programming operations.

MODES OF OPERATION:
Mode 1 – Pass-Thru interface device supporting standards:
J2534-1 Pass-Thru Vehicle Programming API
J2534-2 Optional Pass-Thru Features API (partial)

Mode 2 – Stand-alone device controlled by DiagProg software running on an Android based host

Hardware Interface:

• CAN – 3 independent channels
• UART – 3 independent serial communication channels
• J1850 – 1 channel
• Slot for Expansion Board for future / custom standards
• Nearly unlimited configuration options
  
  

 Interface Protocols:

• ISO 11898 – CAN-FD 5Mbps
• ISO 11898-3 – Fault Tolerant CAN
• ISO 15765 – Diagnostics on CAN
• ISO 13400 – DoIP
• ISO 14230 – KWP2000
• ISO 14229 – UDS
• ISO 9141 – K & L Lines
• SAE J2411 – Single Wire CAN
• SAE J2284 – High-Speed CAN
• SAE J2818 – KWP1281
• SAE J2819 – TP2.0
• SAE J2740 – GM UART
• SAE J1850 – VPW/PWM
• SAE J2610 – Chrysler SCI
• SAE J2809 – Honda DIAG-H
• Chrysler CCD
  
  

 ELP5 Custom System Interface:

• 9 x Programmable Multifunction Input / Output / Bidirectional pins
• Pull-ups, pull-downs, „open-drain”, Schmitt trigger options
• SPI, UART, I2C, 1-Wire, JTAG, BDM, High Speed Clock
• Direct EEPROM and CPU programming

Hardware Features:

• Analog Inputs – voltage measurement on all OBDII and custom pins
• Programming voltage generator – 5÷20V
• Voice and sound signaling
• LEDs and buttons for quick interaction
• High quality automotive-grade components
• 1.0GHz ARM Cortex-A9 processor · 1GB DDR3 SDRAM 1600Mbps
• Power through DLC or external jack connector
• 8÷18V supply voltage operation
• Aluminium casing with anodized surface
• EPDM rubber "bumpers" for VCI and vehicle protection
• Elastic strap for a better grip

Host Interface:

• 802.11 a/b/g/n/ac WiFi 2.4/5GHz
• Bluetooth 4.2 EDR
• USB2.0 Hi-Speed (USB-C connector)
• WiFi Direct

CodiProgUSBMK2 is an universal EEPROM tool that allows to read, edit and write various types of EEPROM memories. I2C, SPI and Microwire memory interfaces are supported. Device is communicating with PC through USB port. It allows to fully adjust main programming parameters like programming voltage, pull-up resistors, clock speed and read/write delays. It can load, edit and save files in *.bin, *.epp, and *.sec formats. CodiProgUSBMK2 software includes ability to upgrade device firmware to enable support for new memory types.

Basic functions of CodiProgUSBMK2:

• CodiProgUSBMK2 device allows for ultra-fast erasing all the EEPROM M35080 / in about 10 seconds/: M35080, M35080-3, M35080-6, M35080-VP, M35080-V6, D80D0WQ, 160D0WQ,
• CodiProg allows to ultra-fast erasing of I2C24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C128, 8582C
• SPI25C010, 25C020, 25C040, 25C080, 25C160, 25C320, 25C640, 25C128, 25C256
• CodiProg supports many types of microprocessors, including Mircowire Freescale
  and Motorola, 
• Manually adjusting many parameters,
• Communication with PC through USB port,
• EEPROM memory programming was never easier!

Elprosys company offers a wide selection of EV charging stations created for nowadays needs and automotive market requirements. Under the Elprosys e-mobility brand we provide the most reliable electric vehicle charging equipment for global clients with product line that covers home smart EV wallboxes, OCPP commercial chargers, DC charging stations, portable EVSE chargers. We have established cooperation with the best technology suppliers in the electromobility industry such as Teison, Topdon, Teltonika, Dinitech, ZenCar, Autel, Testboy and many others.

We offer safe and reliable solutions for daily charging of the electric vehicles for both indoor and outdoor use. Our offer consists of electric vehicle charging stations distinguished by easy installation and simplicity of use. They are ideal for both those looking for home charging stations as well as for business owners who prefer commercial EV chargers with OCPP management platform, specially designed for commercial use. We are sure that our EV chargers will meet your highest expectations.

Elprosys e-mobility provide a comprehensive selection of EV charging stations designed for both residential and commercial applications along with portable EVSE charging solutions. Our chargers are used in public spaces and commercial facilities, such as: company car parks, workshops, shopping centers, hotels, restaurants and residential communities.

Thanks to the RFID functionality, the charging stations can only be used by authorized users who have a RFID cards. Also commercial charing solutions comply with the OCPP communication protocol. This allows users to manage the entire network of charging stations. Using dedicated software, client can collect data about the devices and operations, manage users, monitor energy consumption and costs generated.

Additionally, our offerings encompass essential accessories required for the seamless installation and convenient operation of these charging stiations. Furthermore, we offer charging station testers and power stations to ensure safety and efficiency.