RADIATOR HOSES
Darson’s Radiator Hoses are an above-par choice for replacement parts. Made of best quality EPDM grades and formulations to withstand environmental and ozone degradation. Available in different reinforcements such as knitting, Braiding, and Spiral.
Our EPDM radiator hoses comply with SAE J20 R4, DIN 73411, and DBL 6254.16 as well as OEM-specific requirements.
Reinforcement in Lock Knitting, Plain Knitting, Braiding & Spiral.
Available in Polyester, Nylon, and Aramid yarn.
INTERCOOLER TURBO HOSES
Our intercooler turbo hoses are made of high-quality materials and according to the requirements of OEM. Our intercooler turbo hoses are much appreciated especially in European car segments. Our standard offer includes a wide range of intercooler turbo hoses. Our Intercooler & Turbo Hoses are being manufactured in high-quality Rubber AEM, ACM, EPDM & NBR/CR.
HEATER HOSES
Designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine.
Darson standard heater hose is made for general service on light trucks and passenger cars. Constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance of -40°F (-40°C) to +257°F (+125°C). This black cover hose is similar to SAE 20R3, DIN 73411.
Class D-2, and is specifically designed to be compatible with all common coolants and coolant additives.
Note: Not suitable for fuel or oil transfer.
FUEL HOSES
Designed for use on all types of gasoline engines.
Darson Fuel Line Hose offers excellent resistance to oil, gasoline, grease, and weather. It is constructed with a neoprene cover and nitrile tube for use with leaded and unleaded gasoline and diesel fuel, reinforced with a single ply of braided cord. Darson Fuel Line Hose meets SAE J30R6, R7, DIN73379.
Note: Not suitable for gasoline/oil mixed fuels, alcohol blended fuels, or bio-diesel fuel.
SILICONE HOSES
Silicone hoses are capable of carrying fluids at much higher temperatures than rubber. If you’re building a racing vehicle or adding a turbocharger to your engine, silicone is the way to go. Silicone has a good ability to dampen sounds and vibrations, keeping a quiet and stable profile.
Silicone Hoses are being manufactured in VMQ, FVMQ materials & conform to SAE J20R4 Class A specifications.
By manual plies, Reinforcement is available in Polyester & Aramid Cloth.
VACUUM HOSES
A vacuum hose, which can also be referred to as a “line” or a “tube,” is a flexible rubber connection that routes manifold vacuum to various components and accessories. Since vacuum can be used to power everything from a vacuum brake booster to a windshield wiper motor, a vehicle may contain dozens of these hoses.
Best quality of EPDM Rubber grades resistant to DOT3 brake fluids.
BREATHER HOSES
Darson Breather hoses are Co-Extruded with a fuel-resistant NBR tube and an Ozone resistant CSM cover. They can withstand vacuum collapse and allows an internal combustion engine to vent crankcase pressure out of the engine. By venting pressure out of the crankcase, the engine’s piston rings are allowed to seal tighter against the cylinder walls, this provides better compression and promotes less oil consumption while making more horse power.